Jump to content
SAU Community

Recommended Posts

power and mods list plz

edit.. any problems with heating or boiling problems due to the p/s being pretty much on the turbo???

even i had to move mine.

so im guessing no probs?

Edited by r33cruiser
power and mods list plz

edit.. any problems with heating or boiling problems due to the p/s being pretty much on the turbo???

even i had to move mine.

so im guessing no probs?

:nyaanyaa: no heating problem at all!

just a few mods to entice all you rev heads!

rb25det

2.7 ltr stroker kit

tomei 2.5mm copper head gasket

tomei forged pistons

tomei titanium coated rings

hks cams

hks cam gears

TD06-25G trust turbo

trust 65mm external wastegate with 2" screamer pipe

trust stainless exhaust manifold

os lightened fly wheel

os triple plate clutch

os two way diff

so far car has made 375 rwhp at .05 bar or 7psi

and is bulit to run at 18-24 psi

so should make heaps more when we tune on full boost!

plus heaps more!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :D

Edited by japspec r33
Very impessive looking car you have there and the the list of mods blows me away, well done. I know of 2 people who have had issuses with having the AFM that close to the turbo, have you had any?

if you look closer you tool you will see the AFM is miles away

from the turbo!! :D

fark you cock sucker learn some farkin manners, its not miles away its closer than the people that had thier own issuses, seems like you have some as well maybe you need to see some professionals about it.

fark you cack sucker learn some farkin manners, its not miles away its closer than the people that had thier own issuses, seems like you have some as well maybe you need to see some professionals about it.

here is another pic for all you dummies out there!

you will clearly see that the AFM is about two feet away from the turbo! :D AGAIN!!!

post-9805-1204982920_thumb.jpg

So I take it you have no issuses with it being where it is, thats good, I was just asking a question relating others experience, maybe they will post their own reasons and then you may see what a pratt you are being about this issue.

And are you, This guys fan boy. Do you get free drives for suckin his cock. Fark off you rude prick. :nyaanyaa:

hey mate keep me out of your fantasies;

so why are you trying to get me involved in this shit, forget it now as i don,t want to have a beef with anyone ,if you have a problem with some one else pm them.

DON,T START SHIT WITH ME? :D:D

Edited by japspec r33

I got no truck with you dude. Love your work actually. Cant wait to see that car in action.

The other prick is just a rude bastard tho. Terry asked a civil question and deserved a civil response. Not the shit he meted out.

Good luck with your ride. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean it's probably likely that people overestimate their skills in dialling in a setup and noticing the changes. I had SK shocks and springs, and added heavier springs and got them revalved by Sydney Shocks to suit based upon what I told them I wanted the car to handle like. I got back a completely different feeling set of shocks, which probably (?) feel great on track but holy hell are they rough on tram tracks and the like. The shock dyno actually looks pretty similar to Shockworks (from what I can surmise from a screenshot of a youtube video - and my dyno printout...) Truth be told I doubt I'd be any faster or slower with either setup, or camber/castor combination. I also had whiteline eccentric castor bushes up front of my R34. I removed them and put in poly non-adjustable ones to soothe my OCD (nobody ever set the castor the same side to side, and it'd be near impossible to do) and be happy the wheel is centered in the well now for clearance reasons. Yes I wanted it to move 1mm 'back' :p I've effectively set my castor back to stock, negating all the benefits of that which is supposedly massive. I've probably also altered toe and camber in a negative (detrimental) way. I can't tell any difference steering the car.
    • You reckon? I have to disagree. Notwithstanding that at some point we may all be forced to do this to our cars if we want to keep driving them, there is absolutely nothing about an electric-converted-previously-IC-car that is ever good. EVs that are built by OEMs on platforms that were originally IC already suck, let alone the shitty outcomes that result from doing it as a retro to something that was actually built as an IC car. This is because the platform really needs to be designed to house the battery in a useful place (ie, down as low as possible) and the motors are properly located relative to the wheels that they have to drive. Converted platforms already suck at this. But when you try to shove sufficient battery capacity into a previously IC car, you can't put it down on/in the floor, because that space doesn't exist. You can't find enough space where the fuel tank used to be (if it is an inboard fuel tank) and you don't want to hang it out behind the rear axle line if you had a rear fuel tank. And there's not enough space in the tunnel if you still want to use it for anything remotely like what it was originally used for. The engine bay is too big for a motor, and you'd really prefer that the motor for the rear wheels wasn't in the front engine bay anyway. And there's not enough room where the diff was for a proper man-sized E motor. And then.... there is the complete lack of soul and emotion that is provided by EVs. There are some cracking restomods out there. Like the Alfaholics GTA thingo. But it is petrol powered. Look at the alternative EV version of a GTA restomod by Totem. it is jaw droppingly beautiful. But by all reports is is objectively awful to drive, despite having 600 HP or something, simply because there is nothing there. It sounds like a sewing machine or a leaf blower. It should scream and wail and make the hairs on your neck stand up. Oh, and it's 1500 bloody kg in a car that was <900kg when new. GTRs are heavy enough as it is without pushing them up to 2tonnes worth of pork.
    • https://www.dezeen.com/2025/01/06/nissan-electric-r32-skyline-gt-r-godzilla-sports-car/   I reckon this is pretty cool. Lots of other Resto mods have turned to ev power.
    • hahaha @joshuaho96 the most action it gets is when I have to drive from West to SE VIC to meet the fam. Even then, it;s on highway cruising speeds
    • don't know anyone in this thread, but i just found it, read the entire thing in a few hours, realized greg is still posting progress, and just have to say, this is awesome. it looks awesome. 100% right about the Uras kit making it a pain to get on hoists...have the same kit on my 34 and it takes six 2x4s and race ramps to do it without taking parts off. this reminds me exactly of this thread. https://grassrootsmotorsports.com/forum/build-projects-and-project-cars/r63-amg-the-unicorn-of-my-destruction/110824/page8/
×
×
  • Create New...