Stagea Intercooler

[MRO]

I am thinking about getting one of the new stealth cooling pro intercooler from Just Jap - see link below

http://www.skylinesaustralia.com/forums/Co...94#entry3707494

They use the factory cooler pipes on a r33. Does anyone know/think they would match up to the Stagea factory pipes? If so it looks like an easy install!

[chook]

i installed an R33 ARC FMIC, slightly shorter than these, bolted up to factory pipes, might just have to modify the mounting points slightly and do a bit of hacking on the front inner metal bar. But with enough skill and patience anything can be made to fit.

[Xmetal]

I don't see why it wouldn't fit because the pipes suggest that it would fit up really easily.

I'd much rather try and get this kit to work rather than their other kit which involves drilling a hole in the chassis.

[momo]

Exactly what ive been looking for, thanks for putting it up. Ive ordered one, will let you know if theres any problems but i doubt it, its all in the same place.

cheers.

[MRO]

Exactly what ive been looking for, thanks for putting it up. Ive ordered one, will let you know if theres any problems but i doubt it, its all in the same place.

cheers.

Good work Momo. I think it will bolt straight up but now you will be able to tell us all.

[chuckie]

Good work Momo. I think it will bolt straight up but now you will be able to tell us all.

Morgan you will have to do some mod`s to reo bar i hav just had dumie fit of blitz & had to mod reo so good luck dude.cheer`s chuckie.cooler size is 360x820x70.

[Tangles]

they look good

look to be exact same size to my Apexi cooler, exact same shape etc except mine is HALF tube'n'fin and HALF bar'n'plate

Id be getting one of these intercoolers, if you want to use the same factory holes

you'll need a couple of stainless pipes tho to go from inside engine bay to the intercooler, I used a pipe kit off ebay

edit: I didnt hack anaything, bar the plastic Dayz front bar numberplate bracket (to open it up to let max air flow thru). if you install the 'cooler on a slight angle it fits without touching the reo bar

[MRO]

Tangles - i thought the pipes supplied would match up to the pipes used for the factory intercooler?

Do you have pics of the Dayz bar trim up - i want to do this too as the number plate bracket seems to fill half of the opening.I was concerned it might weaken the front bumper too much and i was uncertain how i would mount the plate afterwards.

Edited March 11, 2008 by MRO

[GoldZilla]

I'm getting a GReddy one similar to Chuckie's one very soon, will let you all know when it's installed.

[Tangles]

Tangles - i thought the pipes supplied would match up to the pipes used for the factory intercooler?

Do you have pics of the Dayz bar trim up - i want to do this too as the number plate bracket seems to fill half of the opening.I was concerned it might weaken the front bumper too much and i was uncertain how i would mount the plate afterwards.

oh I thought they didnt come with pipes.

nice buy if they do, thats for sure.

um, photos, none here at work

there are intercooler threads on here where Ive posted pics

just cut the dayz number plate section off (poorly cut, mind you) and bolted the number plate to the side air dam where the side mount used to be.

definately does not weaken the front area

Id like to get a small sticker number plate eventually.

[mike40sydney]

Tangles - i thought the pipes supplied would match up to the pipes used for the factory intercooler?

Do you have pics of the Dayz bar trim up - i want to do this too as the number plate bracket seems to fill half of the opening.I was concerned it might weaken the front bumper too much and i was uncertain how i would mount the plate afterwards.

i mounted my plate on the bar itself just above the original holes

[DaveB]

i mounted my plate on the bar itself just above the original holes

Nice Mike looking cleaner! What've you done with your grill?

[jasevr4]

That looks really clean Tangles. Nice job!

[RubyRS4]

just cut the dayz number plate section off (poorly cut, mind you) and bolted the number plate to the side air dam where the side mount used to be.

definately does not weaken the front area

Tangles, where in Adelaide are you?

I'd like to have a look at your intercooler install if you don't mind.

I've got a front mount kit coming for my RS4.

[jasevr4]

momo - have you had a chance to take a look at this yet?

[momo]

Been waiting for my front bar to be painted, ill pick it up today and either fit it and the cooler tonight or over the weekend and let you know.

[jasevr4]

Thanks man - really appreciate it

[jonny8ball]

Greddy do a fmic made to fit the stagea just incase some of you are looking for one to fit without having to modify.

Ive ordered one myself ill get back to ya all once its installed!

[GoldZilla]

Yep, I've just received my GReddy one - now I've gotta organise some time to get it fitted up.

[jasevr4]

What are the Greddy kits worth?