Jump to content
SAU Community

Recommended Posts

ok now we all know that the PFC is the way to go for ultimate tuning but PFC's are getting pretty hard to find these days for a R33 GTST so my question is whats the next best thing to use if one cant find a PFC???

do i just stick to a piggy back or is their another replacement ECU that can be compared to the PFC???

ta

Ash

Link to comment
https://www.sau.com.au/forums/topic/209764-pfc-alternative/
Share on other sites

Depends what your aims are... for your everyday streeter with a hi-flow turbo, slightly bigger injectors etc. an E-Manage Ultimate would be more than enough. If your going to make big power it would be better to spend the extra money and get something that's suited for tuning big turbo's i.e Autronic.

Link to comment
https://www.sau.com.au/forums/topic/209764-pfc-alternative/#findComment-3708492
Share on other sites

PLEASE DONT GO A EMU DUDE THEY SUCK BALLZ.

no one tunes them. it is VERY hard to tune, i was quoted that they needed 3 days to do the tune!!!!!. it bollocksed up my ecu. made error codes. then removed it and ran just stock ecu and it runs.

so im going a power fc.

good thing im getting my money back on the EMU. whoo lesson learnt. just because its new doesnt mean its good.

BUT. have heard nothing but good news on the e11v2. i believe the ignition jet200 uses one.

Edited by r33cruiser
Link to comment
https://www.sau.com.au/forums/topic/209764-pfc-alternative/#findComment-3708652
Share on other sites

go the powerfc, sorry wins hands down in most cases unless you can afford wolf 3d, autronic, motec

it just seems with the other piggyback style systems you need to find a competent tuner

then you are back to the old remap style issue where only 1 or 2 workshops can do / fix it / tune it

so your stuck with lack of competition, options and alternate/cheaper pricing

if i was to do another car , powerfc no questions

Link to comment
https://www.sau.com.au/forums/topic/209764-pfc-alternative/#findComment-3709048
Share on other sites

powerfc is old and overpriced.

E-manage Ultimate is the best replacement for the pfc.

people seem to think it just another safc but it is far from that and is alot better than the pfc in my books. able to have more than one map sorted in the ecu and change maps on the fly by a flick of a switch, launch control, ignition cut limiter just to name some of its features.

seem one in action and if the tuner knows what he/she is doing they are a great ecu. their are cars in Japan running over 500hp with the ultimate (Trust/Greddy D1 s15 for example)

Link to comment
https://www.sau.com.au/forums/topic/209764-pfc-alternative/#findComment-3709101
Share on other sites

Apexi PFC - stand alone/plug & play

Wolf 3d - stand alone/plug & play

Greddy E-Manage Ultimate/blue - Piggy back

powerfc is old and overpriced.

Old & over priced?

I'd say one of the best value for money ECU's on the market - it does everything a stand alone ECU should do without any fancy unnecessary useless features

Its been around for years and will be for many more to come

Link to comment
https://www.sau.com.au/forums/topic/209764-pfc-alternative/#findComment-3709201
Share on other sites

Apexi PFC - stand alone/plug & play

Wolf 3d - stand alone/plug & play

Greddy E-Manage Ultimate/blue - Piggy back

Old & over priced?

I'd say one of the best value for money ECU's on the market - it does everything a stand alone ECU should do without any fancy unnecessary useless features

Its been around for years and will be for many more to come

when was the last time apexi update the powerfc? And last time a check Apexi are no longer producing alot of its PFC models

best value for money? no thank you $1500 for a basic ecu (r33/r34 prices) - when you can get the ultimate which does exactly the same as what the pfc does for alot less ($1000 or under) oh and it has more function than the pfc too

so what is the greddy is a piggy back? why does that make such a bad ecu?

Edited by [Michael]
Link to comment
https://www.sau.com.au/forums/topic/209764-pfc-alternative/#findComment-3709220
Share on other sites

when was the last time apexi update the powerfc? And last time a check Apexi are no longer producing alot of its PFC models

best value for money? no thank you $1500 for a basic ecu (r33/r34 prices)

so what is the greddy is a piggy back? why does that make such a bad ecu?

Never said it was bad, I'd prefer to go a plug and play over something that cuts into your loom

Also for EPA/defect reasons

+ installation for the E-MANAGE - its just easier to go a plug and play and might even work out cheaper

Unless you want to pay for the wiring harness etc - by the time you get all that, you might as well spend a little more and go a stand alone ECU

$1,500 is an overstatement, if you look hard enough you will find one for cheaper than that

I know someone who bought one off this forum for $1,000 brand new with HC - that wasn't to long ago either

I also bought a AP Engineering one for $1300 delivered - people are asking anything up to $1600, it just depends on how hard you look

Basic ECU if you think so but it does everything you need it to do for a tuned street/track car

If you were going all out with a spastic track car - 1000hp style then I'd say AUTRONIC or MOTEC but whats the max he will go with an RB25, 300wkw maybe?

PFC is more than capable of handling that

Updated? What for - it does what its designed to do and always has

Link to comment
https://www.sau.com.au/forums/topic/209764-pfc-alternative/#findComment-3709239
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No. The ECU's hose is for a connetcion between the plenum (assuming single throttle body, not ITBs) and the ECU's internal MAP sensor. This is the primary load measurement of the ECU - so you need to get this one right. This has NOTHING to do with the boost contol. The wastegate also needs to see a boost signal - but it is actually far better for it NOT TO COME FROM THE PLENUM (again, assuming single TB, and not ITBs). This should come from the turbo's compressor housing (assuming there is a nipple on there, which there might well not be), or on the boost pipe somewhere between the turbo and the TB. On the pipe from the turbo to the intercooler is usually most convenient. The boost controller is then located between that boost source and the wastegate, ACCORDING TO THE CORRECT PLUMBING DRAWING FOR THAT BOOST CONTROLLER. There is no general diagram or instruction that will be correct for every case. Then the other ports on the plenum are for purposes such as Duncan described. If the boost controller has an internal MAP sensor, for a boost display, etc, then it will want to be hooked up there, alongside the ECU and the FPR.
    • Ok gotcha, so one post to fpr  another to bov  and I have the mishimoto boost controller and a link g4+ so I’d just have the tuner set it up properly. For the last two from plenum post throttle to  ecu/ boost controller, I know that I have a hose coming from the ecu that I was confused about so I assume that’s what connect to the boost controller from the ecu? And then the last is just from plenum to boost controller then to wastegate?
    • From there, it was just a quick electrical check, prime the oil and start her up Which, is not what happened. 1. Bloody seppo Aeropro battery holder. Not only was it too tall for the battery (which I'll forgive them for, I have another battery the same nominal size that is taller than Neil's one, but the bracket is a fixed height so the battery was spaced up) But the thing that really shits me is the hardware to hold it on requires a 7/32 Hex key. WTF. No-one will ever be able to remove or install the damn thing without a hex key they don't own 2. Kill switch no longer worked once the console was installed. Neil mentioned above he had to adjust the length but it no longer cleared the console once installed. Sorted. 3. Suspiciously, the brake light holders were hanging in the boot with no globes. Sure enough the stopper on the brake pedal was missing so they are always on unless the kill switch is activated. Will pick one up tomorrow (turns out 32 and 33 don't use the same stopper) 4. All that sorted, I turned on the kill switch, turned the key to ACC. Nothing. Turned it to IGN. Nothing. Checked some fuses and found the main IGN in the boot was missing which improved things once it was replaced. Now ECU and dash lights turn on with IGN but still no fuel pump. 5. Turned it to Start....ECU on, no fuel pump, no starter. Plus the voltage dropped straight to 9v.  I suspect the starter is f**ked but am going to have to work through it all and see what is happening, really looks like more than one issue. Does anyone have the R33 fuse box key with the circuit it sources from (eg BAT, ACC, IGN, SRT etc) and supplies? I can find a translated list showing Amps and circuit without supply circuit, and I can find supply circuit without Amps and target circuit.
    • 3rd time lucky, the AAC is now all plumbed up after getting some final fittings All set up under the plenum of maximum access
×
×
  • Create New...