Jump to content
SAU Community

Recommended Posts

G`Day all,i have had some seat`s for a while now just had to get them sorted out,which i have now done.so it`s to easy to do undo 4 bolt`s,sorry % bolt`s as you will need to change seatbelt anchore,this has different connector,unbolt your one bolt it on other seat,just the job,You do sit somuch lowe in the car ,as brad & mark found out on sunday`s cruise.so hear`s some photo`s i have taken ,Hope this help`s someone out.cheer`s chuckie.post-36964-1205149806_thumb.jpgpost-36964-1205149164_thumb.jpg post-36964-1205149201_thumb.jpgpost-36964-1205149233_thumb.jpgpost-36964-1205149275_thumb.jpgpost-36964-1205149892_thumb.jpgpost-36964-1205149318_thumb.jpgpost-36964-1205149294_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/209821-r32-gtst-seats-in-to-stagea/
Share on other sites

they are definately worthwhile on anyone into abit of spirited driving/trackwork, i found u actually sit IN the seat rather than ON it like the stagea bench seats haha.

I'm looking at going for a pair of r34 gtr east bear seats from C-Red for $1200 for the pair brand new. Heres the link if anyone else is keen, i think they are a bargain and look good.

http://www.c-red.com.au/newparts/eastbear/seats.shtml

One thing i will say is that if you LIKE to see the front of your car ??? then think again you sit some 70mm lower so if your a short ass you have no hope ???,iam 175cm & my shoulder`s are level with window,post-36964-1205227919_thumb.jpgas you can see i sit low in the car,GOOD LUCK.cheer`s chuckie

Edited by chuckie
they are definately worthwhile on anyone into abit of spirited driving/trackwork, i found u actually sit IN the seat rather than ON it like the stagea bench seats haha.

I'm looking at going for a pair of r34 gtr east bear seats from C-Red for $1200 for the pair brand new. Heres the link if anyone else is keen, i think they are a bargain and look good.

http://www.c-red.com.au/newparts/eastbear/seats.shtml

I like them. So they will sit you lower and further back than the standard seats? get enough carpet and do the rears and door inserts to match :D

shopping list once my 1600 sells- turbo, zorst, seats lol.

Chuckie: What are your front/rear heights? and how far off are those new dash matts :thumbsup:

Edited by Ryan1600
One thing i will say is that if you LIKE to see the front of your car ??? then think again you sit some 70mm lower so if your a short ass you have no hope ???,iam 175cm & my shoulder`s are level with window,post-36964-1205227919_thumb.jpgas you can see i sit low in the car,GOOD LUCK.cheer`s chuckie

haha, u know i am a short arse so i will sit lower as well, but im soo used to it in the daily driver (mistubishi gto) so its not a big deal as long as i can see the road :thumbsup:

I'm looking at going for a pair of r34 gtr east bear seats from C-Red for $1200 for the pair brand new. Heres the link if anyone else is keen, i think they are a bargain and look good.

Brad, if you get these East Bear seats you will still need to get rails.

I have a spare set of Bride rails for sale. Shameless plug.

Chuckie, do the 32 seats have the adjustments for the front and back of the base too, just like the Stagea ones?

Not that I use them, mine are at full low at the back, and veeeery slightly lifted at the front for under-thigh support, but it's always good to have options if someone else needs to drive your car and get comfortable.

Chuckie, do the 32 seats have the adjustments for the front and back of the base too, just like the Stagea ones?

Not that I use them, mine are at full low at the back, and veeeery slightly lifted at the front for under-thigh support, but it's always good to have options if someone else needs to drive your car and get comfortable.

YES they have 3 adjustment`s 2 on bottom & 1 on top,the one in top bit of seat bring wing`s in & out so they will squeeze you or grip no lumber support ,it`s a nobb that take the side`s in or out ,good setup,if you look at photo`s of back of seat`s you can see the nobb that adjust`s them driver`s seat only,cheer`s chuckie
YES they have 3 adjustment`s 2 on bottom & 1 on top,the one in top bit of seat bring wing`s in & out so they will squeeze you or grip no lumber support ,it`s a nobb that take the side`s in or out ,good setup,if you look at photo`s of back of seat`s you can see the nobb that adjust`s them driver`s seat only,cheer`s chuckie

Awesome - even better than the Stagea seats then. I wish the wings on the Stagea seats were adjustable, or at least a bit deeper so they'd hold you in the seat more when cornering.

any seats and rail from 32/33/34 will fit ok so there are plenty of options. But I just can't bring myself to put sporty seats in, its not that kind of car (its more your electric leather seat kind of car)

any seats and rail from 32/33/34 will fit ok so there are plenty of options. But I just can't bring myself to put sporty seats in, its not that kind of car (its more your electric leather seat kind of car)
Duncan It`s Nice to sit in a seat that has some sort of shape & huge`s you ?,I suffer with a back problem so to sit in the car with a seat that is not that NICE to sit in,so this is a GREAT deal better than the Factory seat,I will be looking at some better seat`s some time but i think that you NOW feel apart of the CAR ,IF you like to SLIDE AROUND in your LEATHER SEAT`S then BEST OF LUCK,

cheer`s chuckie.

But I just can't bring myself to put sporty seats in, its not that kind of car (its more your electric leather seat kind of car)

I was proud of of electric leather type seat car today. It managed to take the smile of a near new porsche 911 drivers face today.

But mine does have sports seats :domokun:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hmm. Yes. I should have been clearer. 1000s for Haltech, for extra headroom. 725s for Nistune. You might even be OK with 640s, but if the possible power ends up much more than 300 rwkW you will run out of headroom on the 640s. That would probably be OK and a signal to not push it to that sort of power with Nistune anyway. At that level you probably do want to be thinking about engine protection functions. Oh, and all of that presumes 98 only, not E85. Well....the 1000s would allow you to run E85 at ~300rwkW territory, again, maybe sort of running out of headroom. Hard to tell with E85 - depends on the tuner as to how rich they like to set it up.
    • Yes.  The only scenario I can imagine when the answer isn't yes, is if you drive like there is highway patrol behind you at all times.  If your car currently runs, enjoy it and keep saving. Better costs more, keep saving until you can budget the better ECU. It's worth it.  Nope. Plenty of us making >300kw on unopened motors. Mine is unopened and makes about 350kw if I turn everything up, its fine (lots of caveats here, how the car will be used/abused, how long you expect the engine to last between rebuilds, how has the engine been maintained prior to coming into your ownership, etc etc).   
    • Sorry just wanting to clarify, at this power goal, which should I be going? Also, More info regarding suspension, the rear upper camber arms were used to get the camber back to i believe around -0.5 ~ -1 degree (@ Road and Race in Rydalmere), I forgot the exact figure, but ALOT less camber than what it came originally which was like -2.5degrees. Are the traction arms still recommended? The bilsteins from SydneyKid, they've got 400lb/in fronts & 275/in in the rear, revalved to his specs. Intercooler, I'm just having a look at some on Rakuten.jp and some other japanese sites. Might get something from back there, GReddy, Blitz or HPI, all crossflow. Looking at roughly $450-$500 AUD + shipping... Theres not many choices except that chinese branded Justjap unless you go for blitz return flow. Yeah, only downside with Haltech is the price ahhaha, so expensive, and with all the sensors if I go that route... $$$$$ yeesh. Are headstuds/gaskets needed for <300akw?
    • Haltech fanboi reporting in. Buy the Haltech! 
    • You can try shoving a borescope down there to see what's up.
×
×
  • Create New...