Jump to content
SAU Community

Recommended Posts

Item: Mostly SR20DET and some RB25DET parts

Age: 1-2yrs old

Condition: Good condition to very good condition

Price: Most parts are under $180

To Fit: (What car) Nissan 200sx S14/S15 and R33

Location: Liverpool

Contact: 0404988806

Comments: R33 parts are at the bottom

FS - S14/S15 PARTS

S14 series 2 AFM with rubber intake hose. Good condition

($80)

S14 Series 2 Pistons and rods 78000ks

($140)

S14 Series 2 Fuel pump. Very good condition

($70) ono

S14 oil pan sump. No dents or dings. good condition

($40)

S14 Greddy hotpipe polished. Never used.

($80)

S14 Standard intercooler with piping

($40) Good condition

s14seriesiiafmwithhosexm8.th.jpgs14pistonswithrodsvi3.th.jpgs14siifuelpumpsj3.th.jpgsr20detpolishedgreddyhopy0.th.jpgs14sr20detoilsumpfi7.th.jpgs14stockintercooleryx0.th.jpg

S14 Standard plenium. Very good condition. Travelled 78'000 before upgrade. ($100)

S14 Standard Engine mounts. No wear or tear. Rubber intact

($30)

S14 Full standard pulley setup. Good condition

($20)

S14 Mud guards. One slightly scratched.

($10) x4

S14 Front stock indicators. No scratches. Good condition

($10)ono

10032008984kw5.th.jpgs14enginemountsbh4.th.jpgs14pulleysystemsx2am6.th.jpgs14mudflapsx4zk6.th.jpgs14siifrontindicatorsks1.th.jpg

S14/S15 KYB Damper Adjustable with springs. 2" drop. Very confortable ride. Rears 2" King springs with Nissan shocks. Both very good condition

($350)ono. Travelled 78'000'ks

S14 x4Standard rims 5x114. 16" with 205/55/16 Bridgestones (40% tread). Good condition.

($180)

Hijoin Chromes with semi dish x4. Bridgestone Potenza's (70% 235/40/18) 18x8 and 18x8.5 rears +35 offset. Comes with 2 rear brand new tyres not seen the ground. Minimal scratches. Good condition Fits Soarers/Skylines/200sx/Rx7/MR2 most Jap cars.

($700)

S14 NISMO 3piece wing. Rare find and adds sporty looks. Red in colour

($60). Comes with wiring for LED lights (NAVAN brand) Make offer

fulls14kybshockdamperadxw2.th.jpgbridgestone2055516tyresxr8.th.jpghijoinbridgestonetyres2cq4.th.jpgreds143piecerearwingledok0.th.jpghijoinchromes5x1143tb8.th.jpg

FS - ENGINE PARTS

Blitz BOV with R33 piping. Good condition. No use. Nice sound.

($80)

Turbo XS Black and comes with instructions and box. Powerful loud sound

Good condition. Resprayed black. Hardly used

($70)

Autometer 5" Sport comp boost gauge. Fair condition. Comes with bracket with chrome cup.

($50)

JJR RED Bucket seat passenger to suit any car. Very good condition no rips.

($95)

S14 Door trimming. Has tweeter cut inserts. Series 1.

($50)

R33 Intercooler standard

($30) with part piping

R33 Washer bottle.

($10)

blitzr33pipeba3.th.jpgautometer5boostgaugecupib5.th.jpgturboxsbovwithboxxv1.th.jpgzr33stockintercoolerfp8.th.jpgzr33washerbottleands14bne4.th.jpg

*** Extra parts no pics ***

S14 under body strut braces. 78000ks

($140) front and rear

R33 Steering wheel with airbag

($50)

S13 black front bar with support.

($60)

DC2R Bride low rails. Never used. Good condition

($80) ono

S14 Series 1 door trimming. Good condition has tweeter cut holes.

($50) ono

Extra info: All parts are negotiable. Good to very good condition. Most parts only travelled 78'000k's before removed

Location: Liverpool. Pickup only

Contact: 0404988806

Link to comment
https://www.sau.com.au/forums/topic/209825-fs-s14s15-and-r33-cheap-cheap-parts/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Read the ECU for fault codes or have someone else do it. A faulty coolant temperature sender is usually listed in ECUs. If the sensor itself is not busted it can also be a bad ground connection. Or in a really unlucky case, damaged wiring.
    • Can't be a Futjitsubo as those are made with a flex piece and Reimax is smaller in pipe diameter. If anything it is closest to a Mines pipe, but evidently it is not an actual Mines pipe.   Classic word humor
    • Alright I will try to not forget.   As GTSboy replied to you already, problem is mainly the mismatch between the actual exhaust part and the denomination in the papers. That basically just looks like tampering to a cop, if they were to check your car and notice. If it had been done right they would have clarified it to be a custom pipe and just given it a certain part number that you have to engrave or weld onto the pipe. I will definitely inquire on what to do. Changing the pipe wouldn't be my favorite solution as it costs a bunch of money and the cat was fitted with the front pipe and exhaust under the car, and if the front pipe flange does not sit in the OEM location the cat will need to be refit for any other pipe to work. It also usually doesn't need a brand name or something like that, but more something like a part number. Usually for exhaust parts, on silencers and cat units specifically, there is a badge that reads the certificate number that belongs to these exhaust parts under EU regulation. You get these numbers after you put a part or group of parts through the tedious testing according to EU vehicle legislation and they pass. You can find these "part numbers" on various parts throughout a EU vehicle. On windows, headlights, engine parts, seat belts and so on. All these parts have gone through standardized testing and acquired a so called ECE or EG Certificate that makes them legal to use by themselves in all countries that adhere to these standards. You can also not alter these parts in any way, if you do they become illegal. An example for stampings on an exterior lighting part, the people who need to know can find the documentation for this unit in a database. I do not know what all the standards and so on mean.
    • If that was the case I suppose you could call it "Mein's" brand....  ... I'll see myself out... 😅
×
×
  • Create New...