Jump to content
SAU Community

Recommended Posts

Hey guys just interested in other peoples opinion on my situation. I was ready to sell my car but a month or so ago my r33 ser 1 caught fire as the rocker cover was leaking on the exhaust and it was heatwrapped so it just got soaked with oil heated up and sorta combusted. Now all thats been damaged is the coilpacks/power steering resovoir/ tiny bit of wiring and just general breathers and vaccum lines on the right side of the engine where the exh manifold is. The car has been listed as a repairable write off (dont ask me why) and have been payed out on my insurance claim and they have GIVEN me the car back! The way I see it, its gonna cost me under 1k to fix and have back on the road ready to sell anyway.

Is it worth fixing up and selling? If so How much are they worth nowdays with the following mods?

Or what do you think its worth in current state from what ive described?

Modifications

Full exhaust with Nismo Tip and Screamer Pipe

Hi flowed Turbo by sliding performance

2 Way locked diff

Front mount

Bored throttle body

Apexi Pod (Brand new)

New 1.2mm Cometic head gasket and machined/tested head

16inch Advan racing 3 spoke rims

Drift steering wheel

Sunroof

Type M/Mspec whatever it is standard bodykit

An over all tidy car, black in colour

Thanks guys will be good to hear back from you.

Edited by Jamie88
Link to comment
https://www.sau.com.au/forums/topic/209991-r33-caught-fire/
Share on other sites

geez you came out of that alright! just fix it up and sell it cheap and with your insurance money as well you'll be set.

What does everyone think is a fair price nowdays. 13k? I know a year or so ago they were selling for 15+ with similar mods.

Link to comment
https://www.sau.com.au/forums/topic/209991-r33-caught-fire/#findComment-3716853
Share on other sites

If its a statutory write off and you got paid out wouldn't that mean that its not registrable anymore?

Its a "repairable write off" so once its fixed and passes the inspection its fine to be registered again. And it was insured fire and theft for $10k I payed more when I bought it but thats all thrid party would insure for.

Link to comment
https://www.sau.com.au/forums/topic/209991-r33-caught-fire/#findComment-3723054
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • From the pictures I have when doing the job the flywheel is the same diameter, I don't think they're playing weird tricks like putting weights at the outer diameter to increase flywheel inertia or anything like that. The OEM flywheel is definitely heavier, but it's not a huge difference. Quoted weight savings of the clutch is 2 kg so I can't imagine the flywheel being lighter than ~7 kg. Kind of regret not weighing it before the clutch went into the car but as far as driveability goes I have no complaints.
    • HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • i need a complete tail light for my R33 GTR if you have please let me know.
    • I need a great maintenance workshop around Idaho, if you know one please let me know..
    • Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
×
×
  • Create New...