Proud New Father Of Rb26

[(OO)SKYLINE(OO)]

Dunno how the T04Z goes yet. Last time of drove my car it have R34 GTR turbo's.

Planning to run 1.8 to 2 bar boost.

Yeah the Hypertune plenum and single throttle body is becoming a favourite for drag racers. I'm planning on doing abit but nothing serious.

Mad! Looks like your going for full top end performance.

English ninja

Hah! I fixed the sentence now.

[ZENNON]

Hah! I fixed the sentence now.

Very good! You set a good example!

[(OO)SKYLINE(OO)]

Very good! You set a good example!

Well Iam not an English teacher but I do my best to spell correctly.

[unique1]

looks awesome mate, im running same turbo and jun 2.7L kit, engine has made 585rwhp on 18psi on a very low reading dyno (reads 40hp less than another brand new dyno dynamics shootout one i have gone on) but its currently running 560hp (18psi also) at wheels with a very rich safe tune for the moment, plenty left in it, i can see yours definately going a touch over 650rwhp with the 0.81 depending on the dyno and more with the bigger housing. I have similiar mods except the hypertune plenum, but im getting one very very soon, be good to see how much of a difference the plenum makes.

whos doing the tune work in Perth?

[Public Enemy]

Hi Brad will PM you.

Be sure to let us know the difference the Hypertune Plenum makes on an unchanged turbo setup.

[luke20t]

keen to see a dyno graph, any more updates on the car now?

also, where did u buy your t04z?

[Public Enemy]

Engine is tuned to 4000 rpm while i run in the engine. Once i get a 1000 kms up will be in for more tuning. Hopefully next week sometime, depends on work.

Making around 10 psi at 4000rpm with no cam tuning so kinda looking promising. Off boost drivablity "feels" improved over the old set up and although this turbo is a later coming on boost compared to the stock turbed RB26 (380whp) i was running, the torque curves overlayed are almost identical to 4000rpm.

The damn thing is loud and sounds pretty cranky too.

I purchased the complete HKS T04Z kit through Greenline, awesome gear, highly recommend it on looks alone.

[blitzxtr]

Welldone m8. I had my car dynoed yestserday made 327kw on 14psi then made 378kw on 16psi & then on 22psi made 401kw but the old 700cc injectors are maxed out so 1000s it is. should make a lot more hopefully the torque is quite strong so using all the fuel but torque is good. Put the 1000s in & race fuel plus 32psi & look out hopefully crack 500kw. Anyways Enemy have a good1 like to compare dyno sheets when ya have them since these setups are pretty identical.

[jonn]

Looking good mate. Who's tuning it?

[SLY33]

basic theme is similar to my build. looks awesome, cant wait to get mine in!

looking forward to seeing what the t04z will do. how's the idle sound with those cams? noticeable lump?

[unique1]

In for results, good luck with it Paul, hope it goes smoothly

mines going in for a race fuel and big boost tune in about 3-4 weeks now so ill see how far this t04z can go finally or how quick a rb26 can die lol

[Public Enemy]

yeap so far so good.

quite surprised to see over 400 kms out of a tank of fuel with it running quite rich, 880cc injectors, big cams and no closed loop. Needs more power thou, hehe.

nice work Blitzxtr, get a dyno sheet up for us to have a look at if you don't mind. Have been keen to see how your build has gone.

Unique1, cheers mate. All the best with your's as well. I'll have my fingers crossed for your bottom end lol.

SLY33, idle is a bit high at the moment but it does sound mean. I dread ever having to pull up along side a highway patrol vehicle. Certainly wouldn't use cams bigger than 272/11 for a street driven vehicle, even these are probably a little to big.

[NYTSKY]

This thread needs a video clip

[skylinekid]

yeap so far so good.

quite surprised to see over 400 kms out of a tank of fuel with it running quite rich, 880cc injectors, big cams and no closed loop. Needs more power thou, hehe.

nice work Blitzxtr, get a dyno sheet up for us to have a look at if you don't mind. Have been keen to see how your build has gone.

Unique1, cheers mate. All the best with your's as well. I'll have my fingers crossed for your bottom end lol.

SLY33, idle is a bit high at the moment but it does sound mean. I dread ever having to pull up along side a highway patrol vehicle. Certainly wouldn't use cams bigger than 272/11 for a street driven vehicle, even these are probably a little to big.

f**k im currently in the process of putting my tomei stroker kit into a n1 block and the cams im using a 280's with 11.8lift. and yeh its street driven hahahaha this really is gonna be interesting

[Public Enemy]

some more tuning has been done and the rev limit increased to 8000.

Making 544 hp with 17psi and 16 degrees of timing.

should get interesting with more boost and a play with the cam timing.

[jonn]

Nice. Looking forward to seeing the final results.

[unique1]

some more tuning has been done and the rev limit increased to 8000.

Making 544 hp with 17psi and 16 degrees of timing.

should get interesting with more boost and a play with the cam timing.

nice work, looks very similiar to mine on similiar boost is 8000rpm the limit of the 2.8L kit or is this just a safe limit for the moment? is this on the 1.0 ex housing? fullboost at a fraction under 5000rpm looks like it, mine is making 18psi by 4300rpm i think from memory.

Edited June 22, 2008 by unique1

[Public Enemy]

Thanks John.

Unquie1,

8000 is a safe limit for the moment. Not sure what Tomei rate there stroker kits for but i doubt i'll go past 8500 anyway.

It is a little slow getting the boost up and you make a good point about the ex housing. When the turb came back from ceramic coating the 1.00 was fitted. It was supposed to have been changed to the 0.81 before going on the engine. I will have to check that when i get back to Perth. Only got to drive it a couple of times before i got shipped out bush again

What cams are you using Brad?

Pretty happy so far. the old motor with 380 at the wheels was the most powerful car i'd ever been in. Now with 540 it certainly brings a smile to face. The noise that comes out of it is insane lol.

cheers

Paul

nice work, looks very similiar to mine on similiar boost is 8000rpm the limit of the 2.8L kit or is this just a safe limit for the moment? is this on the 1.0 ex housing? fullboost at a fraction under 5000rpm looks like it, mine is making 18psi by 4300rpm i think from memory.

[R32 Driver]

this isnt "Bad Dett" is it?