Jump to content
SAU Community

Recommended Posts

Acrylic drys faster than 2 pac and is also the only one that can be legaly sprayed outside a booth as well .

This job can be done at home with the right equipment but if its not the right product you can do some serious damage to yourself or others around you .

Best advise would be to do it in 2 pac using clear over base but use satan clear and hire a booth .

the new 2 pacs actually dry quicker than acrylics, much faster.

I've just finished spraying my 31 in 2pac, home job.

7 minute flash off, 20 mins and you can sand it & recoat, maximum of 6hrs before you re-coat.

the '2pac' base coats are basically a fast dry enamel, 7 min flash, 20 - 40 min re-spray.

gxe_inside_doors552.jpg

gxe_rear_bar338.jpg

gxe_grill_detail786.jpg

gxe_rims_paint933.jpg

drivers_guard757.jpg

front_drivers_door467.jpg

yes, we did use all the right breathing equipment, full face masks with Isocyanide filters. If you are doing a spray job MAKE SURE that you have a face mask that covers your eyes and filters that are Isocyanide safe - they cost more than normal particle or chemical filters.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, I’m currently running a str pipe hi low hks exhaust and downpipe. Was wondering if I change out muffler to a titanium one will it change the sound of the exhaust? Plus I have always liked the look of the titanium pipes … anyone have recommendations to one?    side note already have titanium intake pipes. 
    • I looked up my other car that is a R33 GTST series 1.5. Anyone able to confirm what a Aero Form Bumper is?     (1G) 2 Door Coupe; (2GK + 11V) RB25DET; (4B) 2WD HICAS; (7F) 5 Speed Manual; (14G) Super Fine Hard Coat; (15U) Large Rear Spoiler + Aero Form Bumper + Rear Wiper (Aero Selection)
    • Ha ha, all good! I've almost caved in and realised I'm buying one.  I know myself well enough by now that I will start chasing ADHD butterflies half way through building it and not finish it so I'm better off spending the extra money buying one instead of making one just so I can get into straight away.  I would very much enjoy making one as fabrication is probably a strength and definitely a passion but I don't want that to be at the detriment to the car I'm ultimately building it for! There's some pretty good ones around for ~$1100 at the moment so I think I'll just go that way.  At the end I sell it or as mentioned, get another project to make further use of it! Thanks gents.  
    • That link was very helpful thank you.
    • That is the option code, not the VIN. Regardless all of that production is considered series 2: https://gtr-registry.com/en-ecr33-vin-table.php
×
×
  • Create New...