Jump to content
SAU Community

Recommended Posts

So anyways....thought i had a slow leak, turned out it was a crack in my rim.

Getting the rim fixed, but noticed that the camber wear on my tyre is so much that it it's now not exactly legal. Now given that my rim repair is going to be around $130, and I'm broke, i just need the tyre put back on for the next two weeks til i get paid and can think about replacing the tyre (which has about 11mm of tread everywhere except the inside 15mm of the tyre).

So does anyone know of a smaller tyre place close to the city that would just put the tyre back on for me? Or do you think a normal tyre place would put it back on for me if i said i was just taking it to the track or something?

dodgey i know, but i really can't afford new tyres at the moment!!

Link to comment
https://www.sau.com.au/forums/topic/210201-tyre-fitting-for-not-so-legal-tyres/
Share on other sites

You could try taking the wheel and tyre in separately and asking them to fit it, I dunno whether they'd make you sign a disclaimer or something but they might do it. I've had tyres fitted before that were going to the track on the back of a drift car, I think they just noted on the invoice that the tyres were not legal for street use or something like that. You'll still have an illegal/defectable tyre and a cracked rim though, so it's not ideal, and certainly not something I'd do myself.

A better option would be to try to find someone who will loan you a rim/tyre or a pair/set (especially if the sizes are different) that's legal - that way you'll have some grip, and won't have insurance hassles should you run into someone or crash. What size do you have?

Use a tyre lever and squeeze it back on. Theyre just like a bike tyre but tougher

Use a peice of timber to brace against so u dont destroy your rim

Or just buy a 30$ retread or even chuck your spare on

hmm, well, i'm getting the crack in the rim repaired, so that should be an issue - but like i said, that's gonna cost around $130 i'm guessing, and at the moment (not for another 2 weeks at least), i don't have spare cash for tyres.

yeah i should have rotated the tyres at some stage - didn't realise i had that much camber on the front though :blink: and i can only rotate the fronts as i've got 8.5"s on the front and 9.5"s on the rear.

I think i'll just take the other rim off the front - put the two stockers on the front - go to the tyre shop (when i get my cracked rim fixed) and ask them to rotate the two as they are spares or for the track or something - that way they won't be fitting them to the car and they can write whatever they want on the invoice.

THEN.... i'll go buy some cheap 2nd hand tyres or something like the cheapskate that i am :D

oh and size... i'll have to get back to you, i don't even know off hand :blink:

i bought my rims with the stretched rubber already on them and I'm not really partial to it - get way to much understeer at times (which is probably largely due to my completely stock (i.e. f*cken sloppy) suspension.

So you got stock rims with legal tyres on them?

Don't mean to sound stupid, but why not just leave them on the car for 2 weeks. In that 2 weeks you could get a defect, crash the car and have void insurance, etc etc.

  dangerous_daveo said:
So you got stock rims with legal tyres on them?

Don't mean to sound stupid, but why not just leave them on the car for 2 weeks. In that 2 weeks you could get a defect, crash the car and have void insurance, etc etc.

ummm, i think that's what i meant when i said "think i'll just take the other rim off the front - put the two stockers on the front"...

^^ um, i'm not sure how you figure that. i started the thread as a couple of tyre places i went to didn't want to fit non-legal rubber to a rim while it's not on the car, so i was asking for any knowledge of places that would - for example if they didn't mind fitting non-legal rubber if it was for drfit/track. but your input has been super-valuable thus far :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all. I am aware there is lots of discussions about jacking points, where to lift the car and what not. But as usual just a lot of "in my opinion" and nothing definitive, and everyone does it in a different way. I want to hear from some experienced people on which points on the car it's okay/safe/recommended to lift the car using a four point hoist/lift. I will attach some images of my underbody. Sills are largely okayish, the driver side jacking point is pretty mangled though and it looks like the underfloor is slightly pushed in too, but I might be wrong. In the German Skyline forum, the consensus is to use the sidemember chassis rails in the front and the rear subframe? bushing in the rear. I know the manual says to never use the sidemember for loading but lots of folk do it and it was definitely done on my car too as they are slightly bent too. Based on the images, what points do I use to not make the already present damage worse? I'd use wood or rubber blocks to spread the load across a bigger area of course. Driver side sidemember and jacking point mangled one) https://imgur.com/a/eKjzrJX Driver side rear jacking point https://imgur.com/a/W3DWF1P Passenger side sidemember and jacking point https://imgur.com/a/65UvIJe Passenger side rear jacking point https://imgur.com/a/h3k7j53 We can also see some underbody rust but so far it all looks somewhat treatable and nothing that requires a Yoshida style restoration.
    • Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
×
×
  • Create New...