Jump to content
SAU Community

Garrett Gt2860r -5, Gt2860r -7, Gt3071r Turbos


Recommended Posts

  • Replies 88
  • Created
  • Last Reply

Top Posters In This Topic

I am tossing up between the gt3071r and a GCG highflow. My question is as i can not find it elsewhere what is needed to bolt the gt3071r to an rb25, is it just modified oil and water lines or the whole hog meaning custom dump pipe and intake side as well.

Yes you need new oil and water lines, dump pipe, other bits n pieces and plus mainfold if you wanna go for a high mount.

Hey sloutch i mite be interested in the 3071rs, whats the lastest date for a deposit.

cheers

Yes you need new oil and water lines, dump pipe, other bits n pieces and plus mainfold if you wanna go for a high mount.

Hey sloutch i mite be interested in the 3071rs, whats the lastest date for a deposit.

cheers

There won't be a deposit. A direct payment will be set up between the supplier and the buyer.

As i said before, i am not earning any form of money through this deal. I am merely helping out fellow SAU mates to get the best price for their turbos.

also more info on the 3071r, IW or external? what rear housing etc

We can supply you with the internal wastegate or external waste gate version. Which ever one you want. Same as the rear housing.

Unfortunately, i don't think it comes with the actuator. Need to double check with the supplier.

For information please go to Garrett website.

http://www.turbobygarrett.com/turbobygarre...bochargers.html

You've got a PM :)

Is there any way to avoid GST and taxes etc? I imagine if we get "caught", it'll be no cheaper than buying them from AUS? Unless I'm missing something (most likely :P )

Tommo you buying a pair for the bike mate?

lol

:D

sloutch- Im really interested in a 3071r internal wastegated, .82 a/r, ill let you know towards the closing date

;)

just to re-clarify that is $1500 for a 3071r EXTERNAL GATE, t3 4-BOLT REAR EXHAUST HOUSING in the 0.63 REAR.

only reason i am asking agian is, few people have misquoted this turbo for the internal gated, t2x flange,

and been re-quoted over $2000.

thanks,

just to re-clarify that is $1500 for a 3071r EXTERNAL GATE, t3 4-BOLT REAR EXHAUST HOUSING in the 0.63 REAR.

only reason i am asking agian is, few people have misquoted this turbo for the internal gated, t2x flange,

and been re-quoted over $2000.

thanks,

Yes it is $1,500 for T3 flange please read the post i replied. It was stated clearly.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, the other thing I've sorted is a baseline dyno run up at Unigroup's new location. The auto trans was a little unco-operative by both shifting down when the throttle was floored on the dyno (so Mark had to ramp it up more slowly than in a manual) and also by shifting up at 6,000 even in sports mode instead of the indicated redline of 7,000 Still, on a hot day it made 240rwkw at 16psi which seems about right for 300kw (400hp) through an auto at the wheels.  The shape of the curve is not quite right because it was not full throttle to about 4,500 to stop it kicking down, but until I can get a tune on the auto trans control this was the best we could do.....full boost will be well below 5,000 once that is sorted, I'll get some data logs when I can to confirm For comparison, the R32 made 255 at 12psi (at 4,500) on the same dyno with tune, n1 turbos, cam gears, big exhaust but otherwise all standard so the v37 is likely a little better out of the box. One thing that is very clear is that the standard water to air intercoolers are not up to sustained use at full throttle in warm ambient temps. After about 5 runs (so only a few minutes full throttle), it was pulling boost and timing and dropping 10-15% power. Unfortunately I didn't get that printout and the Unigroup guys are away at the moment, will try and get hold of it on their return. So, looks like a healthy engine to start modifying and the only real area of concern is the w2a heat exchangers which the aftermarket has plenty of solutions for    
    • I maintain it actually looked really nice in person. So much so that I thought "No, this is illegal" but there it was, clear as day. I think we can easily call the wing and wheels/height to be transformative. Not saying it's better than the GR Whatever, or the 86, or the WRX STI or anything of that sort (the internet says it all bolts up so you can buy best of all worlds?) but it's still at least a thing and not nearly AS bad as people say.
    • That's less offensive than the previous gen.....except for all that ugly black tupperware around the edges. Blerck!
    • I leant out the window recently and took a picture of this new WRX. It looked real damn fine in person. It's faster around a track (stock) than a (stock) GR Yaris. It's much more practical despite being heavier. It's significantly cheaper. This gen tunes really well, much better than others. .... I think they're probably a lot better than people expect.
    • WRXs are a pure pleb boring car these days. You need to get an STI to even get close to what a WRX used to be.
×
×
  • Create New...