Nytsky's Engine Build

[180or200]

Looks good!

I'd like to see how you plumbed up to the factory pump too, I'm collecting all the bits to put swirl pot and couple more 044's in at the moment, not sure whether to go for braid or the push-on hose that earls do!

http://cgi.ebay.com.au/EARLS-10-SUPERSTOCK...=item27ae77bd34

[PM-R33]

http://www.liquidhorsepower.com/fuel-fragrances.php

Haha thats awesome. Let me know what it's like, i might try it aswell for shits and giggles

[zebra]

Looks good!

I'd like to see how you plumbed up to the factory pump too, I'm collecting all the bits to put swirl pot and couple more 044's in at the moment, not sure whether to go for braid or the push-on hose that earls do!

http://cgi.ebay.com.au/EARLS-10-SUPERSTOCK...=item27ae77bd34

dont use the push on hose for unleaded fuel.

both gates and speed flow say their hose is unsuitable so I would assume Earl's would be the same.

[Marko R1]

http://www.liquidhorsepower.com/fuel-fragrances.php

im gona try that myself - everytime i give it a hit smells like a banana!

[180or200]

dont use the push on hose for unleaded fuel.

both gates and speed flow say their hose is unsuitable so I would assume Earl's would be the same.

I think they all say that, same with the stainless braided, only one suitable is the teflon and unless I win the lottery I cant see that happening!

what should I use?

[PSI Parts]

We can supply you earls teflon lines at a very reasonable price, email me for a quote.

180or200 - For ideas you might want to see how we connected up the factory lines and used the standard pump as a lift pump.

Link: http://www.skylinesaustralia.com/forums/Ps...g-t242907.html#

Dave - Curious as to why you kept the standard TB? I would have thought you would go have gone the Q45 for that power level. Also keen to see how the brakes hold up on a track day with the wastegate so close to the ABS unit.

[TiTAN]

perhaps look into getting some of the ACL heat shield between the dump and the ABS/electronics in the corner.

similar to my setup except with more care taken.

[Craved]

We can supply you earls teflon lines at a very reasonable price, email me for a quote.

180or200 - For ideas you might want to see how we connected up the factory lines and used the standard pump as a lift pump.

Link: http://www.skylinesaustralia.com/forums/Ps...g-t242907.html#

your thread doesnt show the actual connecting to the plastic part of the tank though

[PSI Parts]

Is this what you are after? (obviously one of the clamps was not sitting right and had to be re-done)

[Harey]

Sweet engine bay Nytsky!

As quoted previously, turbo dump pipe should be as big as possible. Thats why you see see turbo drag cars just have enough piping to direct it away from where it might melt something and that is it. Bigger = better after the turbo. Obviously on a street car there are physical limitations that you have to work with.

[PSI Parts]

The GT3076 has been pulled off and will be replaced with a GT3582.

The new turbo has the new .70 surge slotted comp cover and .82 housing in single entry.

T3 or T4??

I'm debating whether to go for the Twin Scroll GT3582R T3 0.78 or T3 0.82 or T4 1.06, arghhh the choices!!

[Lithium]

Have been in an EVO running a twin scroll 1.06a/r GT3582R, the spool is seriously seriously impressive.... I have a .82a/r GT3076R and I'd honestly not expect to feel too much compromise going to a T4 GT35R.

[NYTSKY]

Its T3.

If i had to do the mani and housing again id go T4 TS.

[blockasR32]

how is the car going with the new 3582, im just finishing up my 26/30 build with this turbo and would be interested to know if this turbo will give me 550hp at the wheels

oh and how much to get my comp cover slotted cos i would really like to have that 51r spool noise

[NYTSKY]

It has been garaged since Powercruise.

Adding a few bits and pieces.

Unfortunately the noise from the 3582 is nothing like the 3076 i had, even with the surge slot cover. Makes me want a T51R KAI now

[FineLine]

It has been garaged since Powercruise.

Adding a few bits and pieces.

Unfortunately the noise from the 3582 is nothing like the 3076 i had, even with the surge slot cover. Makes me want a T51R KAI now

Thats interesting dave, i can play waltzing matilda on my surge ported 35/82. Wonder if the 30 bottom end makes a difference.

[NYTSKY]

Hi Noel,

It does produce a noise, id say half as loud as the 3076.

Was nice to meet you at Superlap on the weekend

[FineLine]

Hi Noel,

It does produce a noise, id say half as loud as the 3076.

Was nice to meet you at Superlap on the weekend

DOOOOHHHH! I never connected the dots. GRab me by the ear next time mate. would love to have a good yarn with ya.

[N1GTR]

lol, he was sitting there for aaaaaall that time!

[FineLine]

lol, he was sitting there for aaaaaall that time!

Anyone who would rather go to paintball than superlap doesnt count for shit.