Jump to content
SAU Community

Rims- What Are Some Nice Black Rims?


Recommended Posts

Hey,

i was just wondering what some nice black rims are? could you post name, and mabey even apic of them?

thanks guys :laugh:

Their are a few nice sets released recently, but most of them are limited run time attack models.

Buddy Club just released a limited run of P1 Racing SF Time Attac but you can actually just order the SF in plain black (no red edge) and this is not a limited mdel so is easier to get. Go to http://www.buddyclub.com.au/2007/p1r_sf/p1r.html for the normal black and see the image below for the Time Attack version.

sf_limited.jpg

You could also look at the Rays G-Games 77W in Time Attack colour:

http://rayswheels.co.jp/cgi-bin/cgi2/engli...p;model=090_77M

Link to comment
Share on other sites

Work vs-kf, work meisters... damn, I just went blank. :laugh:

Edit: Just thought of another one that I was supposed to put in the first post, but forgot. GT-C's in black with a nice width and offset look sexy.

Edited by adam-__-
Link to comment
Share on other sites

nismo lmgt4's always look hot in black, dont think black is available anymore but nothing a paint shop cant fix :thumbsup: these are same rims as the z-tune gtr's use

+1

and here they are...

NismoGTRZ2-9.jpg

I put them on my R34 and never looked back... black, forged and sexy. Win/win.

I believe I know someone selling a set... PM for details. Cheers.

Link to comment
Share on other sites

TE37Black.jpg

Super rare Orginal Volk Black TE37

19x9.5 +22 ~70% Pirelli P-Zero 255/35/19

19x10.5 +22 ~65% P-Zero 305/30/19

Excellent condition

$4,000

MeisterBlack3P.jpg

Work Meister 3P

18x10.5 -27

18x13 -34

DunlopFM901 245/40 285/35 ~60% treads left

$2600

MattBlackS1.jpg

Work Meister S1 3P Matt Black

Tyres ~70% 225/40/18

18x8.5 +29

18x9.5 +29

$2600

SSRBlack.jpg

SSR SP1 Black

PCD 114.3x5

17x9.5 +12

Dunlop LM ~75% 245/45/17

$2400

BlackMeister.jpg

Work Meister S1

PCD100x5 we have spacers for 114.3x5

18x8.5 +25

18x10 +20

$2100

all this available from J-Imports

damn i'm NICE!

:thumbsup:

Edited by joeyjoejoejuniorshabadoo
Link to comment
Share on other sites

try these Gmax rims...

I would love a set of the Meister S1 ... but they are very $$$... awesome wheel tho, no bodykit or any other crap needed

There is a silver 350Z around the corner from my place with huuuge black TE37's that really fill out the guards with good offset... looks damn fine

post-7369-1205819828_thumb.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • So next year I am looking at upgrading from my VE SS bomadore ute to something more refined.  I wanted to stick with a V8 but not anything German or Australian, either a coupe or a sedan. So if I wanted anything newish that limited my options to either the Lexus RCF which I quite like. But with the price they demand and a kid on the way a 2 door coupe is probably not going to be the best idea. The next best thing would be the ISF but the newest models are 2014 and commanding over 60k and even the older 2008 models in ok condition starting around 35k is kind of bullshit. So I figured if I could not have the noise I could perhaps make do with easy power. Enter the infinity Q50 or Skyline equivalent. The price difference between the 300 and 400hp models seems a bit crazy. Right now there is 300hp Q50 one on carsales from a dealer with 61km for 27k drive away. If I wanted to get a 400hp Red or 400R car the prices seem to start at 43k From my limited research it seems that the only differences are that the 400r/Red Red runs more boost and a more aggressive tune. There are are turbine speed sensors on the turbos. Has 2 pumps for the water to air intercooler. Runs an engine oil cooler. I'm guessing that the exterior trims might look a little more sporty as well. I had a lazy look for upgrades to bridge the gap on z1motorsports They have kits that upgrade the water to air heat exchanger as well as the coolant pump which should give a non Red/400r better intercooling temps than the stock Red/400r. I added an engine oil cooler with a thermostat as well to try and make things as close as possible. Obviously the ECU is going to need a tickle. Having not done much in the way of research they also sell a ECU flashing tool with pre loaded tunes that are supposed to boost the non Red/400R by 100hp which adds 1k USD to the cost. The total cost of the parts @ the current time including shipping and taxes worked out to be $4350 AUD. Personally I would rather get the car tuned on a dyno which would probably add more cost Assuming the worst that you got a workshop to install the new parts I would guess no more than 5 hours would be required in the worst case @ 5 x $150 per hour = $750 So the total cost could be around $5100 So for easy number 5k + 27K = 32k I guess that would leave some change left over to swap out the open diff and fit a LSD Any thoughts?      
    • Right, not sure why I thought it to be a lean spike. It might be fixable with modern card-style hot film MAFs which have some design features to avoid counting reversion flow but I've never tried it myself.
    • I did not realise this, I'll contribute more and earn my stripes and retry later. 
    • I'm only going to hassle you for posting links to images. It's against my policy to click links that could be some nasty payload. Sadly, you need to make 9 more posts before you can just stick the images directly in a post, unless @PranK sees this and bends the rule for you.
    • Hello,new to the group, I bought a R32 from auction recently, wondering if anyone knows the cars history, seems to have the usual go fast bits on it, plan is to do an engine swap- add 2 extra cylinders and 1 extra turbo. https://www.dropbox.com/scl/fi/i4rjmlzubjbwjtguh6f4s/IMG20241011140744.jpg?rlkey=q0lumm251377vknbqktfwrycq&st=7scvwx4e&dl=0 https://www.dropbox.com/scl/fi/ro24qmwzlczzlfsr4y05x/Screenshot_2024-10-10-10-49-23-90_9a2f5bb2149dae94cd1e190effc09b33.jpg?rlkey=oyguh26ttshlf04ccp48odf4v&st=xloae97b&dl=0   New to forums and posting pics, if links don't work, take it easy on me, 42yrs old and I tune carburettors!!  
×
×
  • Create New...