Jump to content
SAU Community

How To Make A Complete Inlet Manifold And Plenum


ISL33P
 Share

Recommended Posts

How to make a complete inlet manifold and plenum from scratch. Pictures tell a thousand words. The end plenum is exactly the same, just the base is a little simple.

All hand made, no cnc machine just a milling machine and a lot of patience and measurements as you can see.

Piece of 10mm aluminium plate

20102007383.jpg

A lot of time measuring and drawing and then approximately 4 hours on a milling machine. Not electronic aids, just by hand

20102007385.jpg

20102007387.jpg

Base and bellmouths cut and ready to go

20102007388.jpg

All in place and tacked together

20102007389.jpg

20102007390.jpg

20102007392.jpg

20102007394.jpg

Sheet of 3mm aluminium

20102007395.jpg

Sheet cut up and engraved

20102007397.jpg

Might as well throw in a throttle body since I have a few "lying" around

20102007396.jpg

And the end result. Polished and blasted ready to deliver.

4G637.jpg

Obviously there is a lot more to it, but you get the idea.

For example

designing of plenum to not only fit but do the job.....runner size, diameter, dimensions, length, plenum taper etc etc

matching round bellmouth to a square port

final matching of runners & base once complete welded

machining the base to ensure a perfectly flat finish

polishing

fitment of vacuum fittings

throttle cable bracket on the bottom of the plenum

make and mount fuel rail

most circumstances, mounting of injector bosses

Your looking at approximately 3-4 days works from design to end product you see above.

More than anything, this will give you an idea of why custom parts (that have been proven) cost so much....and to tell you the thruth my costs are nowhere near what I have seen charged out there. End hourly rate is approx $40 per hour usually less, compared to some workshops charging from $80-120+ per hour it isn't really that bad.

Any questions, please feel free to ask.

Thanks,

Ariel

Link to comment
Share on other sites

dam that flange plate is so perfect i thought it was CNC cut

my cnc machinest charges me 20buxs per flange but if he doesnt already have it designed he has to charge me 200buxs just for drawing it up on his computer

it does save time and for 20buxs a flange it works out eazier

for a hand made flange thats realli good, i realli thought i was cnc machined

Edited by STR8E180
Link to comment
Share on other sites

he did say it was all done buy hand and no computer controlled.

Which makes it a lot harder and much more tedious to acomplish!

and two still pull that sort of a finish off, man THATS GOLD!!!!!!! :)

love your work!!!!!!!!

please P.M me if you do big orders! :(

Edited by secretgarage
Link to comment
Share on other sites

thank you all. when it comes to machining the plate, an obssesive personality does help.

STR8E180 - thanks for the comment, much appreciated. Please pm details of your cnc machinist...thank you

zebra - pm sent on its way

secretgarage - pm sent on its way

benny_blanco - yes they all are. I am actually in the process of building my own flowbench at the moment to help reduce r&d costs.

type vu - Yes, I can do group buys on every plenum I offer.

For the sake of not upsetting moderators - I have already done that too many times - please call me, pm, email or visit my website for any enquiries.

Thanks again for the good feedback.

Ariel

Link to comment
Share on other sites

Ariel,

Very nice work, uncommon for people to show the details of their work off for something like this, gives us tinkering bunch something to aim for in our own work.

Link to comment
Share on other sites

Honestly, it was something I had second thoughts about but considering I will not disclose any measurements/dimensions etc etc, I thought what the hell.

Ariel

Link to comment
Share on other sites

Honestly, it was something I had second thoughts about but considering I will not disclose any measurements/dimensions etc etc, I thought what the hell.

Ariel

still lots of thinking involved to replicate your work, but most who have the means to make this could work that out from scratch anyway.

inspirational though.

Link to comment
Share on other sites

all materials are from www.jntperformance.com.au

only thing is all mine bellmouths are custom made and can not be on sold.....I have to keep some secrets :down:

Link to comment
Share on other sites

haha - fair enough you need to keep some things to yourself.

i just wish your logo wasnt so complex :) i've gotta try and powdercoat around it next week sometime

Link to comment
Share on other sites

all materials are from www.jntperformance.com.au

only thing is all mine bellmouths are custom made and can not be on sold.....I have to keep some secrets :cool:

i know steve weston well. used to work with him in brisbane.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...