Can U Wet Sand 2 Pac Clear Coat

[Aif]

hay i found 2 runs in my clear coat and was woundering if I can sand them out very lightly then polish? or will it dull the clear coat?

if i can wet sand the clead what grit would u recommend and wat polish? i dont think these wiull buff out ;p

AiF

P.S. there are about 3 coats of clear

[Craved]

do a google search on colour sanding - should find some DIY and how to's

but yes you can cut back the clear coat, then polish the scratches out.. looking at up near 2000 grit paper before polishing

[Aif]

do a google search on colour sanding - should find some DIY and how to's

but yes you can cut back the clear coat, then polish the scratches out.. looking at up near 2000 grit paper before polishing

cheers

[fab34]

hey mate depends wat polish ur use im a painter wet sand with 1000-1500 grit the go over with 2000 should polish just make sure u dont rub through the clear and use a block wen sanding only reason fo usein coarser grit first is to rub it out a bit quicker and flater

Edited March 15, 2008 by fab34

[maximumrpm]

just use 2000 grit and then use a cut and polish and buff it

[B. J.]

1500 to 2500 is fine, just make sure you use alot of water add some detergent (it stops the sanded paint from pilling) and take it very easy.

I'm about to do the same for my 'backyard' project - then I'll take it off to a shop and have them give it a complete buff/polish/wax.