Jump to content
SAU Community

Recommended Posts

lately my car has been jerking back n forth between 1000 and 3000rpm and is getting annoying...

it only happens on the low revs, as when the boost kicks in it pretty much goes away...its a r32 with rb20det....

no mods other then r33 turbo, front mount, exhaust, safc...10psi boost....just began doing it lately n wasnt always like that!!!

GOT ANY IDEA'S????

THE IGNITOR PLUG WAS LOOSE AND WAS MAKING RIDE ROUGH AND AS THOUGH IT WAS RUNNING ON LESS CYLINDERS....

FIXED NOW...BUT ON IDLE REVS SEEM LIKE THERE MISSING...GOT ANY IDEA'S??

Edited by allthewaytotheskyline

what does your car idle at? does it idle high every now and then? does it only do this when car is idleing high?

my car does it when ideling high, it idles high when the wheather is colder, best take it to a mechanic as thats what i will have to do.

i suspect in my case it could be my TPS or CAS, because i have already eliminated the AAC by cleaning it.

probably try cleaning AAC see if it fixes the problem.

I am having a similar problem as well, after it has been driven around for a little while. It starting to get worse, started off as a intermittent problem. If I hold my foot on break and put a little load on it at 2000 rpm while driving, I can feel it surging. I was on the pathway of a sensor as well.

Please Read my blog.

http://www.skylinesaustralia.com/forums/blog/whitebeast/index.php?

Edited by WHITEBEAST
  • 1 month later...

i was fiddling with the coil packs and unplugging them 1 by 1 and seeing which was supposidly faulty...then when i fiddle with the ignitor i realised the plug was slightly unclipped...so i pushed it in tight n hopped in n bobs ur uncle...all good

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, really happy with how it all turned out As for aftermarket lip, nah, I'm not really a fan for practically reasons on a street car that gets driven everywhere  I did have the full lower kit on my 2015 STI, but found the front lip scrapped alot, even at stock 4x4ish ride height As the NC sits now, with the lowest point of the car at 110mm, so just legal, some steep driveways and steep speed humps will still "just" scrap those little plastic OEM air dam thingies on the undertray just before the front wheels
    • Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
    • I’m doing some side developments on SR20det S13 engines, its one my hobby cars used it to compare flow capacity of some smaller size wheels. SR20det is one of another JDM legendary engines I'm sure there are plenty of SR enthusiasts on this forum, I will share results some common turbo configurations here. a quick run down of what the car is: Wide body 180sx Type X with black top engine (blue). It has: Stock bottom end Haltech 1500 ECU 5-0 motorsports trigger kit Kelford SR20DET Beehive Spring with Titanium Retainers Kelford Cams SR20DET S13 188-B 268/272 Cams G25-660 Turbocharger in T2 .64 rear housing internally gated ARP Head studs MLS head gasket 1000CC ID injectors Walbro 450L Fuel pump Front mount cooler kit JJR’s 3 inches turbo back exhaust (its too short for the 180sx it had to be extended) Pump 98 fuel Hub Dyno tune So far made 270rwkws at 22psi full boost by 4500RPM. Engine is very knock limited hence a pretty bad looking top end. From previous experiences it seems like SR20dets are happier with bigger size turbine, some thing like a GT30 would make way better top end, but on same time response is lost. It won't be a problem with S15 VCT engines. I'll be testing alternative turbine housing, turbine wheel and possibly dump pipe options for extra flow to resolve the problem and of course E85 would resolve all the issues.            
    • Awesome writeup and details. Thanks for sharing the story so far. I can relate to parts of it with my previous car and some of the issues I had to deal with.
    • Wow the colour matched hard top completely transforms the car. Are there any nice front lip options for the car or is that off the table?
×
×
  • Create New...