Jump to content
SAU Community

Recommended Posts

I currently have a black r32 gts-t and would LOVE to put mods onto it.. however, would i be better saving for the gtr and then doing mods? or are the gts-t's just as nice to do up? anyone for advice, im quite stuck in the middle with wat to do.. thanks guys.

Link to comment
https://www.sau.com.au/forums/topic/210769-decisions/
Share on other sites

How old are you? - serious question, as a GTR insurance will probably kill you if you are under 25.

I would suggest if under 25, stick with the GTS-t for now, mod it a bit, but don't go crazy on it, just do enough to keep yourself happy. Then when the time comes, sell the GTS-t without too much invested and buy a GTR

Link to comment
https://www.sau.com.au/forums/topic/210769-decisions/#findComment-3725972
Share on other sites

How old are you? - serious question, as a GTR insurance will probably kill you if you are under 25.

I would suggest if under 25, stick with the GTS-t for now, mod it a bit, but don't go crazy on it, just do enough to keep yourself happy. Then when the time comes, sell the GTS-t without too much invested and buy a GTR

19, but this waiting game to get nicer/quicker skylines is killing me..

Link to comment
https://www.sau.com.au/forums/topic/210769-decisions/#findComment-3725981
Share on other sites

Why are teens too desperate for the 'my dick is bigger than yours' game?

The money you'll save not having to insure a GTR will get you some nice mods on the GTS-t, or for the GTR later.

:(

Link to comment
https://www.sau.com.au/forums/topic/210769-decisions/#findComment-3726088
Share on other sites

Insurance isnt a problem if his already full comp insured anyways - its only a few hundred in difference(going by Just Car's quotes)... it'll be more the maintenance and cost of stuff that goes bang that would shred his wallet to bits.

Edited by typevu
Link to comment
https://www.sau.com.au/forums/topic/210769-decisions/#findComment-3726141
Share on other sites

Stick to the GTSt, do some basic cost-effective mods, exhaust, cooler, boost control, chipped ecu, suspension (in approx that order) and learn how to drive well with 160RWKW to start. You'll be quicker than 95% of what's out there and not broke.

After that, better turbo with a FPR and you're set for 200RWKW. Much more and you start to affect the drivability of a RB20.

Link to comment
https://www.sau.com.au/forums/topic/210769-decisions/#findComment-3726188
Share on other sites

DONT GET A FORD.

if u got a gtst, buy a gtr front cut and drop the motor and gearbox in and leave it rear wheel drive.

half the cost, same insurance price, and more fun.

plus gtst are just as much fun as gtr, and with the rite stuff can be just as good.

but get urself sum really really good suspension parts first.

Link to comment
https://www.sau.com.au/forums/topic/210769-decisions/#findComment-3726601
Share on other sites

Honestly drive your GTS-T the way it is dont worry bout spending another cent on it, its just going to drop in value anyway with the market flooded, any mods will just mean more money you loose when you go to sell it as there are plenty of modded 33's available.

Wait till your 21+ by that time 32 GT-R's would have dropped in value again which will give you more money for mods and speeding tickets.

Link to comment
https://www.sau.com.au/forums/topic/210769-decisions/#findComment-3726734
Share on other sites

well right now i'm sticking to my r33 gtst! gonna keep it and go for r33 gtr, although i could get one now but i rather not! i rather learn how to drive my current car and then look at upgrading after i'm comfortable with it! it'll be more exciting when you learn how to properly drive your car and then jumping into something similar with better brakes, better traction and more torque!

well that's my opinion and what i'm doing anyway!

Link to comment
https://www.sau.com.au/forums/topic/210769-decisions/#findComment-3726874
Share on other sites

i think that you should wait for a GTR and do up some basic mods for your gtst....exhaust, intercooler and maybe a ebc and a retune and you will be a lot happy once you get some decent power by doing that also boost it up to around 10-12 psi and that should be good for a while....keep it like that and enjoy it and save for a GTR for later mate.....i am more then happy with the performance of my r33 gtst and would be nice to have a GTR but happy with the gtst....

my 2cents worth

Link to comment
https://www.sau.com.au/forums/topic/210769-decisions/#findComment-3728376
Share on other sites

All good advice above... and most of us have been in the same boat.

It took me 16 years to be able to afford my GTR... and now that I have one I love it .....but it mostly sits in the shed.

For a young guy I definitely would say mod the Gtst without going nuts.

I had one for six years with 200rwkw and it was a reliable great fun and daily driven car. That is the SMART choice.

A GTR is a great car but does require expensive parts and maintenance, especially at the age most are now.

Enjoy....

Link to comment
https://www.sau.com.au/forums/topic/210769-decisions/#findComment-3728452
Share on other sites

19, but this waiting game to get nicer/quicker skylines is killing me..

haha famous last words... have you had any driver training ect? or just think you can handle a bucket load more power?

sorry to sound rude but i have seen it before younger guys saying i need something faster then 2 weeks later i hear of them hitting tree's poles ect.

Link to comment
https://www.sau.com.au/forums/topic/210769-decisions/#findComment-3728537
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...