Jump to content
SAU Community

Recommended Posts

Guys,

Car has been in the workshop for about 5 days now and went on the dyno today any Produced a Poor Result of 151 RwKw!!!

Mechanic Put consult on and was coming back with all perfect readings, did compression test, 150 over all 6 Cylinders, Pod Filters, Brand new Oil and Filter,98 Premium Unld,Brand new Iridium Spark plugs gapped at 0.8, 11 Psi Boost and came back with a Dyno Reading of 151 Rwkw!!!

At this stage the mechanic is stumped!

Mechanic tried this:

Thought it may of skipped a Tooth on timing? No Perfect!

turbo's Playing up? No Nothing wrong with them!

Air Flow Meters- Perfect!

Consult Came Back with 2 Minor faults that need to be looked up but dont effect Performane (Maybe!!!)

What he is doing tomorrow is gunna check the Stock Cat Converter....

If this aint the Problem then he is Stumped!!! (not really what ya wanna hear from a mechanic!!!)

Mods: Pretty Much Stock.

Twin Pods

Aftermarket Dumps

Aftermarket BOV's

Thats It!!!

UPDATE 21 MAR 08

Went and saw mechanic yesterday afternoon to see what was going on. They have successfully gained another 20kw buy adding an extra 5 Degrees on the Cams but this is not stock. They apparently spent 8 hours of solid time on it( FOR FREE TO!!!) on wednesday and were chopping and changing things and managed to come up with the extra 20 Kw buy the cams.

At this stage they wanna try a new ECU but they have none there that are stock. So now i have been asked if i wanna buy a Aftermarket ECU to Plug in and Play! But if i decide to go to a Power FC, there could be a chance that it still runs the same!!! So now gunna find a Power FC and Try to see if it works again!!

Any one know where i can get one CHEAP!!!????? Mechanic Quoted me somewhere between $1200 and $1400 for a FC!! Seen them on Ebay NEW for $950!!! Oh and they suggested i get a better intercooler cause the one i have now is damaged! Been like that since i bought it! Some minor Fin damage. Always thought it was stock but apparently it isnt i was informed yesterday!!( I can always remember a Nissan Part Number or something similar on the top or Bottom though after i resprayed it!!!) Maybe there Pulling my LEG to get me to spend money?????????

UPDATE 6 APR

Got car back from mechanic on Friday. All Problems fixed with POWER FC and making 200 Rear WKW's.

ANY BODY GOT ANY OTHER SUGGESTIONS OR CAN HELP????

Link to comment
https://www.sau.com.au/forums/topic/210998-150-rwkw-on-a-r32-gtr-update-6-apr/
Share on other sites

  • Replies 111
  • Created
  • Last Reply

Top Posters In This Topic

hey mate that sounds about rite.. depends what mods u got but when i got mine dinoed and tuned i made 150 awkw on 9psi 170 on 11 psi and198 on 14 psi... thats with a tuned power fc, full survice just been done new timing belt oil cooler, cat back and pods...

i was a bit disapointed with my read out aswell but it still goes alright.

good luck

Could you list your mods please so we can determine what sort of power you should be getting.

Thanks

This is whats in it!

Everything is Pretty stock except for:

Pod Filters

Aftermarket Dump Pipes

And Turbosmart BOV's.

92 Model 79xxx on the Clock.

Mechanic Reckons it Should be at least around the 200Kw at the Rear Wheels! They actually Disconnect the Front Shafts instead of Taking out the Fuse! Reckons is can F#ck up sensors or some crap!!!

nope, he's wrong.

My mate with a R32GTR and brand new engine, stock turbos made 220rwkw on a powerfc full tune.

150rwkw sounds about right, maybe a little more but not that much. Aftermarket ecu makes a big difference.

Get one.

nope, he's wrong.

My mate with a R32GTR and brand new engine, stock turbos made 220rwkw on a powerfc full tune.

150rwkw sounds about right, maybe a little more but not that much. Aftermarket ecu makes a big difference.

Get one.

Thought Stock HP was about 270 HP which equals to around 200Kw???

I and few other people i know first hand, made between 205-220 with pods, and a cat back. Those two mods will naturally raise boost to about .7bar

Tuned a PFC later and made 4 more KW (safe tune, much more ign down low)

EDIT: This is very old, almost embarrassed about the AFR's.. I meant Safe with a capital SOFT :P It wasn't like this for long.

gallery_14713_1542_7995.jpg

Edited by GeeTR

his not wrong.. ur wrong

a stock gtr will pull about 170-180 @ all 4 wheels in stock trim... they dont make 206kw @ fly either.. that was just the manufacters claim to keep the government happy just like supras.

They make more like 220-230kw @ fly.

and 220rwkw is pretty weak for a "full" tune power fc.. most ppl make around that with just exhaust, filters and some boost @ all 4... with comp most ppl look @ around 230-240 @ all 4....

I made 287kw @ all 4's with just a pair some hi flows... they arent much bigger than stock and certainly smaller than N1 spec turbos..

I and few other people i know first hand, made between 205-220 with pods, and a cat back. Those two mods will naturally raise boost to about .7bar

Tuned a PFC later and made 4 more KW (safe tune, much more ign down low)

Hey mate!

Those Stats mate are they at the Rear Wheels??

They actually Disconnect the Front Shafts instead of Taking out the Fuse! Reckons is can F#ck up sensors or some crap!!!

Theres an amount of preload on the transfer case clutch packs. Removing the fuse means the plates are rubbing on a stationary friction plate.

In the grand scheme of things, the wear is negligible; everyone does it when tuning. Concerned people remove the drive shaft, but by no means is it required.

Make sure they're not just doing it, to rack up trade hours :P

his not wrong.. ur wrong

a stock gtr will pull about 170-180 @ all 4 wheels in stock trim... they dont make 206kw @ fly either.. that was just the manufacters claim to keep the government happy just like supras.

They make more like 220-230kw @ fly.

and 220rwkw is pretty weak for a "full" tune power fc.. most ppl make around that with just exhaust, filters and some boost @ all 4... with comp most ppl look @ around 230-240 @ all 4....

I made 287kw @ all 4's with just a pair some hi flows... they arent much bigger than stock and certainly smaller than N1 spec turbos..

Some Good info there! Thanks Mate!!!

Theres an amount of preload on the transfer case clutch packs. Removing the fuse means the plates are rubbing on a stationary friction plate.

In the grand scheme of things, the wear is negligible; everyone does it when tuning. Concerned people remove the drive shaft, but by no means is it required.

Make sure they're not just doing it, to rack up trade hours :P

Hey thanks for that Bro! Maybe they are trying to scrap a buck out of me!! Just Never Heard of them Disconnecting shafts B4!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...