R32 Gtr 4wd Fuse Location?

[omega36]

Hello... where exactly is there location of the 4WD fuse in the R32 GTR?

Thank you.

[omega36]

OK... found it.

I checked the fusebox inside the cabin and the engine and they both have the correct fuses, however I am still sitting on RWD?

The torque split isn't showing any movement no matter how much the back end is spinning, so I assume 4WD ain't engaged.

Where else do I need to look?

[blind_elk]

Fluid reservoir, behind the boot liner panel to the right of the RH taillamp assembly.

[heller44]

Also the fault indicator light on the attessa module in the boot, read off the flashes for the fault code.

[omega36]

It seems I have a Mines ECU... could this be the reason I'm only in RWD? All fuses are where they should be!

[heller44]

mines ecu in the passenger kick panel? if so it wouldn't be the cause.

attessa ecu is on the underside of the parcel shelf in the boot, on the left hand side if i recall. right hand side one is hicas / power steering module. attessa ecu is the one with the indicator light peephole on the housing.

[blind_elk]

It seems I have a Mines ECU... could this be the reason I'm only in RWD? All fuses are where they should be!

The ECU sends a TPS signal to the ATTESSA computer. If the Mines isn't a direct plug'n'play, then it might not be sending any signal.

Check the error codes on the ATTESSA ECU.