Jump to content
SAU Community

R32 Gtr 4wd Fuse Location?

omega36
 Share

Recommended Posts

omega36 Proficient

omega36

Posted
  • Author
Posted

OK... found it.

I checked the fusebox inside the cabin and the engine and they both have the correct fuses, however I am still sitting on RWD?

The torque split isn't showing any movement no matter how much the back end is spinning, so I assume 4WD ain't engaged.

Where else do I need to look?

heller44 Mentor

heller44

Posted
Posted

mines ecu in the passenger kick panel? if so it wouldn't be the cause.

attessa ecu is on the underside of the parcel shelf in the boot, on the left hand side if i recall. right hand side one is hicas / power steering module. attessa ecu is the one with the indicator light peephole on the housing.

blind_elk Grand Master

blind_elk

Posted
Posted
It seems I have a Mines ECU... could this be the reason I'm only in RWD? All fuses are where they should be!
The ECU sends a TPS signal to the ATTESSA computer. If the Mines isn't a direct plug'n'play, then it might not be sending any signal.

Check the error codes on the ATTESSA ECU.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      High temp brake fluid?

      By Murray_Calavera · Posted

      Just checking, when we are talking about high temp fluid, are we all referring to DOT 5.1? I haven't had any issues with changing it every 2-3 years. 
    • Duncan
      High temp brake fluid?

      By Duncan · Posted

      Yeah that is still true AFAIK.....good brake fluid should be changed annually because it absorbs water faster which is more often than most mechanics would do it. There are cheap tools that check water% in brake fluid if you all scientific about it. I for sure would (do) run good brake fluid in anything that even casually saw the track like Murray said; avoiding the risk of "exciting" fade is worth it
    • GTSBoy
      High temp brake fluid?

      By GTSBoy · Posted

      Well, back in the day..... "race" fluids, which were essentially only really "high temp" fluids, used to absorb water more readily. So they really needed to be changed more often anyway. The coincidence of that being directly necessary along with it being what racers would do as a matter of course was just fine.
    • soviet_merlin
      High temp brake fluid?

      By soviet_merlin · Posted

      Does the high temp fluid degrade any different over time compared to normal one? That's one thing I've always been wondering. Because a track car is going to get the fluid flushed probably way more often than every two years and will see less kilometers driven. I would think the requirements are different. I'm running Motul RBF 600 in mine. Was recommended by my mechanic before a trackday and I've stuck with it since. Hasn't seen the track since but I've kept buying and using it for servicing anyway.
    • PranK
      High temp brake fluid?

      By PranK · Posted

      The brakes are all stock bar some DBA slotted discs and the EBC pads and braided lines. The car has brake ducts as standard but they're kinda pointed in the general direction of the brakes rather than really getting at the heat source. I guess I should hit it with an infra red thermometer after a session and see what they're at.  100%! Its just a curiosity more than anything. As I said, high temp brake fluid was such a track day rage back in the day. From people I speak to at the track and threads on here everybody has their own take on it but I'm not gonna scoff at spending a few more bucks.    OH, a quick side question - would you use brake fluid from an opened container even if the lid has been on? Eg, if you have a bottle that you opened last time you flushed, it's been tightly closed, is it still good? 
×
×
  • Create New...