Jump to content
SAU Community

Advice On Removing R34 Gtt Front Bar

Howie

By Howie,
in Exterior & Interior Styling

 Share

Recommended Posts

Howie Grand Master

Howie

Posted
Posted

Hey all,

Probably a simple one for you guys.. just wanted to know what's the easiest way to go about removing the front bar for a R34 GTT. I've seen the step by step article for the R33 and it looks different... but then i haven't tried so I don't know.

Can someone give me some pointers?

Cheers all,

Howie

Evil34 Experienced

Evil34

Posted
Posted

Hey Howie,

Undo the splash guard under neath the front bar if there is one there and then there are two bolt on either side of the front bar in the guards.

One is where the guard meets the front bar and the other is about half way in between the first bolt and the headlight youy will have to feel with your hand if it is even there. If the bar has been taken off before it will most likely not be there as most people dont bother puttin gthe second bolt back.

I think that is it, if you have any issues let me knoe and i can probably come and give you a hand.

Cheers

Shaun

ducki Proficient

ducki

Posted
Posted

I'm trying to remove my front bar at the moment and I can feel there's in between the guard and headlights. It's pretty tight for me to squeeze my hand in there to undo it.. any easier method I should take? Do i need to remove the splash guard completely?

Howie Grand Master

Howie

Posted
  • Author
Posted

Hey ducki, you can just see it here where i removed the bar.

east_bear_lip_off.jpg

I found it easier to remove the inner plastic guard, then full right lock it to remove the two drivers side bolts.. then full left lock to remove the two passenger side bolts. I used a long screw driver with an extension to help.

Also there's two plastic clips behind the numberplate and two screws on the grill you need to remove.

All the best.. and thanks to Evil34 for putting me on the right track in the first place mate.. here's what i ended up doing over the weekend.. fixing up an east bear lip (had to make a fiberglass mould from the bumper hence why it had to come off).

east_bear_lip_quarter.jpg

ducki Proficient

ducki

Posted
Posted

yeah.. hehe managed to removed my bar.. today too...

had to really shove my hands under the bumper to get the 2 last one out.

I didn't need to remove anything behind the no. plate.. think its different for me since its the standard bar but also thanks to Evil34 otherwise I wouldn't have known the bolts in the guards existed.

Rav3nNZ Enthusiast

Rav3nNZ

Posted
Posted
Hey ducki, you can just see it here where i removed the bar.

east_bear_lip_off.jpg

I found it easier to remove the inner plastic guard, then full right lock it to remove the two drivers side bolts.. then full left lock to remove the two passenger side bolts. I used a long screw driver with an extension to help.

Also there's two plastic clips behind the numberplate and two screws on the grill you need to remove.

All the best.. and thanks to Evil34 for putting me on the right track in the first place mate.. here's what i ended up doing over the weekend.. fixing up an east bear lip (had to make a fiberglass mould from the bumper hence why it had to come off).

east_bear_lip_quarter.jpg

hey where did you get that lower lip from. looks sick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Neil's R33 Gts-t Build

      By GTSBoy · Posted

      Well, no. It's an 023, which is pretty similar to an 040. Although it is hard to tell from the specs, as given.
    • GTSBoy
      My R32 Money Pit & The Headaches That Come With It

      By GTSBoy · Posted

      Hmm. Maybe the (other thing I forgot about!) Haltech removes at least some, if not all, of the problem I described. I guess there is still the possibility of getting it wrong if the AC is set up/wired up for the Haltech as if it was in an R34 (simply because it's on a Neo), and that's playing foul with the R32 AC computer.
    • MBS206
      Neil's R33 Gts-t Build

      By MBS206 · Posted

      Glad it eventually came out Duncan!   I believe that might be 040. 044 is the inline pump, so has screw fittings in and out. 040 is more just drop it in fuel and the bottom is "open" (mesh) from my memory 
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      well mate, while I hear your pain, turns out I don't feel it this time! Must have been a bastard of a job crammed into the boot The tank was very empty (probably pumped out, not dropped and drained because there were some fumes still) and in very good condition internally. I'm sure he never ran e85 in it I don't know what the hell Nissan's fuel tank engineers were thinking about their clipping system, this hanger was really hard to get moving but came out in the end All looks very good (as I'm starting to hopefully expect) and Matty was right it is an 023 (044) bosch which should be plenty for the injectors and turbo
    • acsplit
      SAU VIC Motorkhana Saturday 8th Feb + Entry List

      By acsplit · Posted

      Saturday 8th February 2025 8:30am Capped 26 entries Standard Entry Fee: $89 Members Entry Fee: $55 (SAU Victoria Only) Entries Close: Thursday 6th February 8pm. Supp Regs: TBC Disclaimer: Download  Please electronically sign and email to [email protected] or print and hand in and Driver Sign In. email [email protected] To compete in this event you will require A valid  AASA General Speed licence or (Day license is $35.00 via the AASA Website) MA Licenses are no longer accepted by AASA https://aasa.com.au/ A helmet, long sleeve clothing and it is reccomended a 1KG mounted fire extinguisher (But not Mandatory). Further details within Supp Regs Above. You can bring and have a passenger in the car but they need to comply to the same safety and clothing as driver. Entry Link >> https://www.sauvic.com.au/entry/deca/20250208 Entry List: 1. Martin Sullivan 2. Richard Hicks 3. Warren Clark 4.  5.  6.  7.  8.  9. 10.  11. 12.   13. 14 15.  16.  17.  18.  19. 20.  21.  22.  23.  24.  25. 26.    Reserve list 1.  2.
×
×
  • Create New...