Jump to content
SAU Community

Rb25 Conversion Into R32

1morebar
 Share

Recommended Posts

lilmissr32 Enthusiast

lilmissr32

Posted
Posted

Dunno about you loom question as I'm getting my whole Microtech LT12s wired up completely. As for your 'easy conversion' question - if you are putting a standard RB25 in it will fit perfectly with no problems at all. If you are putting on an aftermarket plenum (like my Greddy one) you have to move the master cylinder along about 1 inch. There are a couple of other fiddly bits but so far everything is coming together fine. And I'm guessing you are putting in a 25 gearbox? Well, you will have to make up/modify your gearbox crossmember as it doesn't fit and you will have to get an RB25 slave cylinder as well. Don't know about the speedo as my conversion is about 3/4 finished but I believe we have to get a Nissan Navara speedo head? There are heaps of topics on here regarding the conversion........

BHDave Grand Master

BHDave

Posted
Posted

the search function is your friend.

There were a lot of guys doing this swap a couple of years back.

Search the tutorials section for a thread by predator. It'll be the most comprehensive write up on the actual engine swap. There are a couple of good threads on the gearbox and speed sensor swap in this section if you look at page 2 or 3 i suspect.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Millerman
      Japanese Toll card readers (little boxes that talk to you in Japanese on start up)

      By Millerman · Posted

      Hey everyone, i have quite a few of these now and looking to sell my collection.    There’s many different brands and they all say something similar when powered up. if you would like an example of what they do and how they work i suggest searching JDM ETC READER into google or youtube.    I know some people dont like them but others want that final “JDM” piece for their project.  Below are a few examples of what i have.  feel free to contact me if you want more photos or have any questions. i also have a few that dont make noise but just light up to give the aesthetic.   $80 ea or will do a good discount if multiple are purchased. Located in South Australia and happy to post interstate if required! Thanks for your time! 
    • RB2533
      UniClutch

      By RB2533 · Posted

      I hope so.  It seems pretty nice. OEM feel the lot. 
    • GTSBoy
      UniClutch

      By GTSBoy · Posted

      I wouldn't be surprised if this helps. And I wouldn't be surprised if it keeps changing for a bit after the new slave&hose go on, because I find that my clutch always does this sort of shenanigans after any serious dismantlery. And then it settles down after a few corrective tweaks such as you've already done.
    • RB2533
      UniClutch

      By RB2533 · Posted

      Ist post I joined after seeing this thread  I have just installed on a r33gtst at first I liked it but I am finding the peddle free play changes …. To a point I have had a zero free play condition and the thrust bearing stayed engaged. I had to back off the adjustment on peddle.   I am about to change slave and fit a braided line to see if I can get a better result 
    • 32pwwr
      Is this saveable r32 gtr seat

      By 32pwwr · Posted

      I sent off a message to a guy, waiting for his response if he can do it or knows someone.
×
×
  • Create New...