Jump to content
SAU Community

**pics Now Up**280rwkw R32 4 Door With All The Mods! **price Drop!**

Simon-S14
 Share

Recommended Posts

Simon-S14 Grand Master

Simon-S14

Posted
Posted (edited)

Make: Nissan

Model: R32 4 door

Milage: 90xxx on car, 67xxx on the engine

Transmission: RB25det manual box

Colour: Mazda Red

Location: Adelaide Hills SA

Complied? Yes

RWC supplied? N/A

Currently registered? yes, 3 months

Price: $20,000 ono $18,000

Contact: Email on MY EMAIL or PM me

Mods as follows

Suspension

-HSD HR Coilovers with 7 kg front and 5 kg rear springs

-R33 front LCA's

-Tein Castor rods

-new upper control arm bushes

-Rack spacers

-Cradle bushes + pineapples + cradle mods

-Driftshop Rear Camber arms

-Driftshop Traction rods

-Driftshop Hicas Lock bar

Engine + Drivetrain

-Series 1 RB25det with low km's, in awesome condition and serviced every 3 months, it doesnt get driven much really. Motor is faultless and has perfect compression, no smoke etc. Producing 280 rwkw on 17 psi boost

-Remapped RB20 ecu

-264 Cams

-ISC Cam gears

-S15 injectors

-FMIC kit (generic kind)

-GT 3071R turbo

-Exedy 5 puck Clutch with GTR pressure plate

-AM Performance engine cover

-RB25det gearbox + custom tailshaft

-Fully rebuilt 4.3 diff with rebuilt (1 month ago) Tomei Trax 2 way lsd

-conversion has been done properly, and as such, everything works

-no air con

-oil cooler and relocator kit

-Bosch motorsport 600 hp external fuel pump

-Malpassi rising rate FPR

Body/interior

-Painted by All Type Crash in Mazda Red

-Origin rear bar, Final Konnexxtion Skirts and Fibreglass GTR front bar with genuine lip and N1 Air intake slots with modified GTST bonnet

-front and rear guards flared professionally to allow wide offset wheels

-Bride seat - has wear but thats unavoidable

-Nardi 330mm steering wheel

-DRFT gauges with some Jap boost gauge

-has back seats and belts, along with child restraints etc, some rear trip pieces are missing but they arnt too hard to find these days.

-Blue LED dash

Wheels/Tyres

-Work Emotion XD9's in 17X9.5 +17 all round

-Maxxis MAZ - 1 on front, near new

-Neuton NT5000 on rear 50% tread

Extra info

-Car will be sold with 3 months SA rego

-Chassis is straight and accident free, i have had a few mindor panel rubs while drifting on the track but this has been panel damage only and all parts have been repaired professionally

-car is 100% reliable mechanically, i look after it well and do a lot of preventive maintenance, as such there are a lot of things that have been replaced on the car to bring it up to standard

-This is one quick car, and the traction is awesome, with 280 rwkw it moves and when taking off from a stand still it briefly wheel spins 1st then just grips in 2nd and 3rd and absolutely HAULS. There is no reason why this couldn't be a street driven car... i drove it around for 3 months every day as my daily but i got sick of the bucket seat. If i had a stock seat i prob would have kept driving it in comfort :cool:

-Lots of time and effort has gone into the suspension set up in it, its a highly competitive car on the track, but regardless, its well set up to have fun, just hop in and drive it!

-Dont be put off by the fact that this car has been driven hard, its built tough and tuned even tougher! Call my Tuner Jeff from The Speed Lab if you have any tune related questions.

-All stickers will be off the car except for the All Type Crash stickers.

-I dont have any current pics of it with the GTR bar yet, just the old Vertex bar.

Thats about it, im sure ive forgotten shit but most of its there, Massive thanks to the people who have helped out with this car!

I will consider swaps. After a 34 4 door with mods, if you think you have something suitable pm me.

Price is Negotiable. I am after 18K as the car is atm, However In the next few weeks i will take the turbo off and put a good condition RB25 stock turbo on, which will then be retuned to get the 220 rwkw i was on before the turbo upgrade.

I would take $15K for the car with stock turbo, 220 rwkw, a generic 3 inch jap exhaust, some other 17 inch wheels (not the XD9's) and stock cams and cam gears.

Pm me to work out a deal!

94257497plpz3ele080315gxl1.th.jpg

heres a pic, no rear bar on ATM, but you get the general idea.

Will be doing a nice photo shoot once bar is on and car is all cleaned up.

p4120144sw3.jpg

p4120148ke8.jpg

Edited by Simon-R32
  • 2 weeks later...
Twisted_SIL80 Apprentice

Twisted_SIL80

Posted
Posted (edited)

ahhhhhh... cant believe your selling this simon!!!!

Such a perfect setup car for just about everything!!!

you need to show new pics mate... looks so hot!!!

Edited by Twisted_SIL80
Boof Mentor

Boof

Posted
Posted

looks better with the rear bar on mate!! GL with the sale surprised you haven't had much interest in it yet!! Stick them stockies on it and drive it daily

  • 3 months later...
FLYR33 Collaborator

FLYR33

Posted
Posted

that 32 looks really tuff man, if i had the money i would buy it .

that pic of it on the track makes it look even better, u should print of, and frame, i would if someone took a shot of me like that lol

good luck with sale buddy.

  • 8 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Help Understand GTT Boost Setup

      By MBS206 · Posted

      It's all the sound deadening, and extra shit piled into them, plus all the extra (even though it's thinner) material for crumple zones. I can't fathom in modern cars why they need canbus to the headlights, and why the headlights must be vin coded on some cars to the ECU, BCM, and security module! Especially when they claim it's for security, yet, the canbus at the headlights let's thieves steal the car in minutes, so even more cars are being stolen! The Mercedes Sprinter 907 vans. They're a huge van, but a "basic" van. Yet they have that many canbus networks, plus two Lin networks, AND an Ethernet network. Logging a single network alone of 8 byte data frames, and they will generate a 20mb log file in 5 minutes. That's one network, and I can't remember the exact amount, but there's over 10 full CAN2.0B networks in them. I'm not a fan of modern cars, oddly, more and more I hate DBW, and all the bullshittery the cars try and interfere with. But all that bullshittery adds weight, plus crazy regulations on crumple zones, plus, ever picked a modern seat up, half of them have like 4 electric motors in them and will weigh 30+kg each. Then all the motors for things like adjustable steering columns blah blah blah. And did I mention the sound deadening so you can even hear an ambulance right behind you even if you 7.2surround sound is off?
    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      Ah ok, yeah it should be flat, I believe the r34 battery tray has these 3 bumps in them they makes it line up and everything is flat, don't see how it would tilt if everything is secured.
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      Agreed it actively wants to kill you which I love driving fast cars slow is my stick
    • elinde
      R32 Skyline Handbrake Question

      By elinde · Posted

      Awesome! I was thinking S14 since they are longer. I'll give those a shot. Thanks for the input!
    • Shoota_77
      Beers and skylines Fatz style

      By Shoota_77 · Posted

      Far out, that thing looks like some loose fun!  Nothing beats the rawness of a filthy old Nissan with zero aids to keep the wheels pointing in the right direction like modern "fast" cars!    
×
×
  • Create New...