Jump to content
SAU Community

Recommended Posts

Make: Nissan

Model: R32 4 door

Milage: 90xxx on car, 67xxx on the engine

Transmission: RB25det manual box

Colour: Mazda Red

Location: Adelaide Hills SA

Complied? Yes

RWC supplied? N/A

Currently registered? yes, 3 months

Price: $20,000 ono $18,000

Contact: Email on MY EMAIL or PM me

Mods as follows

Suspension

-HSD HR Coilovers with 7 kg front and 5 kg rear springs

-R33 front LCA's

-Tein Castor rods

-new upper control arm bushes

-Rack spacers

-Cradle bushes + pineapples + cradle mods

-Driftshop Rear Camber arms

-Driftshop Traction rods

-Driftshop Hicas Lock bar

Engine + Drivetrain

-Series 1 RB25det with low km's, in awesome condition and serviced every 3 months, it doesnt get driven much really. Motor is faultless and has perfect compression, no smoke etc. Producing 280 rwkw on 17 psi boost

-Remapped RB20 ecu

-264 Cams

-ISC Cam gears

-S15 injectors

-FMIC kit (generic kind)

-GT 3071R turbo

-Exedy 5 puck Clutch with GTR pressure plate

-AM Performance engine cover

-RB25det gearbox + custom tailshaft

-Fully rebuilt 4.3 diff with rebuilt (1 month ago) Tomei Trax 2 way lsd

-conversion has been done properly, and as such, everything works

-no air con

-oil cooler and relocator kit

-Bosch motorsport 600 hp external fuel pump

-Malpassi rising rate FPR

Body/interior

-Painted by All Type Crash in Mazda Red

-Origin rear bar, Final Konnexxtion Skirts and Fibreglass GTR front bar with genuine lip and N1 Air intake slots with modified GTST bonnet

-front and rear guards flared professionally to allow wide offset wheels

-Bride seat - has wear but thats unavoidable

-Nardi 330mm steering wheel

-DRFT gauges with some Jap boost gauge

-has back seats and belts, along with child restraints etc, some rear trip pieces are missing but they arnt too hard to find these days.

-Blue LED dash

Wheels/Tyres

-Work Emotion XD9's in 17X9.5 +17 all round

-Maxxis MAZ - 1 on front, near new

-Neuton NT5000 on rear 50% tread

Extra info

-Car will be sold with 3 months SA rego

-Chassis is straight and accident free, i have had a few mindor panel rubs while drifting on the track but this has been panel damage only and all parts have been repaired professionally

-car is 100% reliable mechanically, i look after it well and do a lot of preventive maintenance, as such there are a lot of things that have been replaced on the car to bring it up to standard

-This is one quick car, and the traction is awesome, with 280 rwkw it moves and when taking off from a stand still it briefly wheel spins 1st then just grips in 2nd and 3rd and absolutely HAULS. There is no reason why this couldn't be a street driven car... i drove it around for 3 months every day as my daily but i got sick of the bucket seat. If i had a stock seat i prob would have kept driving it in comfort :cool:

-Lots of time and effort has gone into the suspension set up in it, its a highly competitive car on the track, but regardless, its well set up to have fun, just hop in and drive it!

-Dont be put off by the fact that this car has been driven hard, its built tough and tuned even tougher! Call my Tuner Jeff from The Speed Lab if you have any tune related questions.

-All stickers will be off the car except for the All Type Crash stickers.

-I dont have any current pics of it with the GTR bar yet, just the old Vertex bar.

Thats about it, im sure ive forgotten shit but most of its there, Massive thanks to the people who have helped out with this car!

I will consider swaps. After a 34 4 door with mods, if you think you have something suitable pm me.

Price is Negotiable. I am after 18K as the car is atm, However In the next few weeks i will take the turbo off and put a good condition RB25 stock turbo on, which will then be retuned to get the 220 rwkw i was on before the turbo upgrade.

I would take $15K for the car with stock turbo, 220 rwkw, a generic 3 inch jap exhaust, some other 17 inch wheels (not the XD9's) and stock cams and cam gears.

Pm me to work out a deal!

94257497plpz3ele080315gxl1.th.jpg

heres a pic, no rear bar on ATM, but you get the general idea.

Will be doing a nice photo shoot once bar is on and car is all cleaned up.

p4120144sw3.jpg

p4120148ke8.jpg

Edited by Simon-R32
  • 2 weeks later...

ahhhhhh... cant believe your selling this simon!!!!

Such a perfect setup car for just about everything!!!

you need to show new pics mate... looks so hot!!!

Edited by Twisted_SIL80

looks better with the rear bar on mate!! GL with the sale surprised you haven't had much interest in it yet!! Stick them stockies on it and drive it daily

  • 3 months later...

that 32 looks really tuff man, if i had the money i would buy it .

that pic of it on the track makes it look even better, u should print of, and frame, i would if someone took a shot of me like that lol

good luck with sale buddy.

  • 8 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Please do not connect it to your manifold. If you do, as GTS suggested please record the lot in 4K with good mics attached.   On the factory Skyline, there's a upside down pipe that allows it to breathe, looks like this   
    • For me I'd need some serious justification for why it has blown out.  Have you questioned him on it?  To be honest if you didn't question him right from the get-go on the first invoice that was already way over the initial quote and then you've (presumably) then paid another $1375 on top of the first invoice, then you're pushing shit uphill to get a favourable result now... It was years ago I last got an engineer out but it was around $450-$550 per visit.  That was just to inspect each progress point he gave me for the project.  Is he just doing progress inspections or is he providing engineering diagrams, technical assistance, etc??  If he's not, he's a filthy rip off merchant.  If the $3100 is the final sign off then you need to cop it on the chin, pay it and move on.  If it's not, piss him off and get a new one.  Not many Jeeps I'd value at $10K full stop let alone just engineering fees on a written off, half actual value WOVR Jeep....
    • Oh, yes. If you connected it to the manifold your first drive would be very eventful. Very shit. Very interesting. Perhaps take a video if you feel the need to see. Terminating the breather at the top of the bellhousing is normal/stock. Some gearbox lubes (hello Redline Shockproof) like to foam up a bit and require the breather to be extended up higher, so you don't get spots of smurf jizz staining the floor under your car. Mine is thus right up behind the head. Make sure you fit a u-bend at the top so it points back downward so that dirt and schmutz has a harder time getting into it.
    • Cheers for the replies. So i don't connect it to the manifold I just run the hose high up on the firewall?
    • It doesn't really answer your question...but is the head unit full android or just android auto, are you happy with how quickly it boots and responds, and do you have a link?  If we can identify good Android alternatives it will really help people stuck with Japanese screens. Did it have a separate reverse camera input so you would replace the factory one, or are you just going without now...that would be a pretty big steps back. And finally, do you have a picture of the "wire" that you can't plug in? Most likely it is some sort of aerial that is not too important eg japanese traffic or am radio or something if you haven't noticed a functionality issue
×
×
  • Create New...