Jump to content
SAU Community

Recommended Posts

  • Replies 210
  • Created
  • Last Reply

Top Posters In This Topic

Great! thanks soo much....my rims for sale or swap now :-P

If you get TE37's make sure you get a low offset, such as +22 or lower, then you'll have the concave look spokes. High offset TE37's look very average...

EDIT: Saw that you drive a R34 GTR, so obviously if you'll be after low offset wheels if you wish to fill out those guards.

Edited by ~Hypnotik~
If you get TE37's make sure you get a low offset, such as +22 or lower, then you'll have the concave look spokes. High offset TE37's look very average...

EDIT: Saw that you drive a R34 GTR, so obviously if you'll be after low offset wheels if you wish to fill out those guards.

mad thanks for the tips mate, i dont know much bout rim offsets etc

they look great though, ill be getting black ones or powedercoating them black etc

the smaller nissan bootlid badge , they changed to a larger nissan badge early 2001 all nur edition cars have the larger one

This is, of course, ignoring the fact that the car is painted Millennium Jade lol

I did think it may have been the millennium jade but in the first photo page 9 under lights its a little deceiving looked more like one of the silver colours , looking at the new photos from the rear it does have the larger bootlid badge again under lights the page 9 photo looks different ,my bad

Edited by gtr13
  • 1 month later...
  • 3 years later...

^^

EPIC !

In saying that would hate to own it as I know it would spend most of its life inside a garage due to paranoia of having its quality depreciate from too use and the fear of having someone steal something of such high value and mainly rarity.

^^

EPIC !

In saying that would hate to own it as I know it would spend most of its life inside a garage due to paranoia of having its quality depreciate from too use and the fear of having someone steal something of such high value and mainly rarity.

You're forgetting about the 'regular' R34 that you'd also own and would use for driving around :D

You're forgetting about the 'regular' R34 that you'd also own and would use for driving around :D

Would be good in an ideal world where I was on an extremely hefty pay figure or a lotto winner haha unfortunately I dont fit the criteria for either of the two :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh... literally every time i jump on a forum, see an instagram post or see an engine bay at a car show, i get an idea and add it to my 'to do' list. So what started off as, hey can u just make a couple of intake hard pipes because my dumbass bought the wrong apexi kit, blew out into a 2 week job including braided brake lines & custom bash kit for the front lip haha.  Getting Luke from A4E engineering to make a full custom exhaust with a controllable aes dump valve so i can actually switch between quiet and loud, because right now its just loud all day every day. Then after that go and get the tune redone flex e85 & 98 as i get bugger all milage from e85, makes going for longer drivers difficult
    • Car looks clean as. You ended up getting quite a bit done 😂  So what's the plan for the exhaust? 
    • The only Neo rods that were any different to any other RB25 rods were the DET ones, and they were the same as RB26. Here is a Neo DET rod. O5U part number visible. Here is a post in a thread here on SAU with evidence from someone who has done this before. There are photos in the thread of normal RB25 rods.  
    • Sure, but why assume that will be the case forever? And why assume you'll be able to do an oil change to swap back to a stock drain bolt before that happens? And does it even matter when I change the oil at fairly short intervals? Life can be funny sometimes and unexpected things can happen. Like breaking a collarbone so you can't do any work on your car for a few months but the oil change is due so you have to take it to somewhere and hope they don't do something stupid like stacking the new drain plug washer on top of the old one.
    • Do u know how to identify the rods are rb25 or neo ones? Can u look into the pics and tell me is they de or de neo ones. Its confusing becoz my motor has de neo head but block is 25de 75t, so really confusing me about rods, crank.
×
×
  • Create New...