Jump to content
SAU Community

Recommended Posts

  • Replies 100
  • Created
  • Last Reply

Top Posters In This Topic

maybe throw up a rough price for general service (oil/filter/plugs), then maybe a diff oil/trans oil change, to things like links/bushes/suspension just to give people an idea. Seems like timing belts are your thing :D, rough price to get one changed? maybe even turbo swaps/manifold swaps, not everyone needs work right now, but if something where to come up then its always a good reference.

will keep you in mind, if im unable to do it myself :ban:

ok then .

quotes.

timing belts full kits inc,water pump,bearings,fresh coolant,belt,seals,checkover car,from 700$.

service oil and checkover car from 65 inc mineral oil and filter.

direct bolt on turbos for rb's from 250$

full service inc,gearbox,check diff,,engine,brake,and complete check pver from 140$inc parts and labour .

really if you can find better on these prices i would say go for it as they are not much for labour.

cheers,

ps. had plenty of happy customers ,

hope every one is happy with the service as i am pretty sure that they are.

Just to give John another :thumbsup: - he did the water pump, cam belt, tensioner, idler, air/powersteer/alternator belts on my 32 GTR. He did great work and gave me a good price. It was also cool to be able to hang around and chat about a few other aspects of the car. Definitely recommended.

i don't know john so i can't say if he's good or not... he sounds decent

one thing that will be a worry is that he doesn't have public liability (???)

this could be an issue if you get a dickhead customer who screams 'you broke my car!'

i need an auto electrician... i want a relay or solenoid installed in my car as it has hot start problems?

can you do this? i prefer not to replace the starter as it's ok otherwise

just engine with no box or complete car ,

as i have to do this in my driveway and it is hard with no hoist it would not be worth it as you would be able to get any shop with even a bit of gtr knowledge would probably be able to do it cheaper.unless its just engine it would not be woth it for me or you to do it.

sorry but im just laying it out straight.

cheers

i don't know john so i can't say if he's good or not... he sounds decent

one thing that will be a worry is that he doesn't have public liability (???)

this could be an issue if you get a dickhead customer who screams 'you broke my car!'

i need an auto electrician... i want a relay or solenoid installed in my car as it has hot start problems?

can you do this? i prefer not to replace the starter as it's ok otherwise

what do you mean hot start probs. as in the car wont start again once its warmed up?

if this is the case its prob a faulty starter relay in that case just needs a replacement with a new one if thats not it i would need to have a look at it and yeah i can probably fix it !

ps. its good to see someone look from the mechanics p.o.v for once on the liability factor as that stuff does happen but i am not stupid and if something goes wrong thats my fault i warrant all the work i do.

cheers

lol mate i was like you , doing little jobs at home but now ive got all the specialty tools

i do engine rebuilds , gbox rebuilds , turbo/engine conversions e.t.c anything really,but rarely do i get ppl for service's

i specialize in SR's RB's and EJ's

current job im doing

http://img139.imageshack.us/my.php?image=imgp1175kp3.jpg

So if any one has jobs that johns not interested in doing

give me a call 0406209351

GL john

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Oh, that's grim. Something bad has been happening there.
    • Put an endoscope down the hole and saw this. Not quite all around the bore but a good 60% at least. Chin to the chest and towards further disappointments I guess.
    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
    • Excuse me, but 2) does apply 1) Would also apply if you consider how much is spent in the alternatives. Also there's the option of 3), buy one pre-built that you can put your family in (it's me, it's my car)   That said, I went on a ~500km drive the other day. I didn't use anything more adventurous than 3rd/4th gear at about ~3000RPM and 50% throttle and I was going as fast as anyone has any sense doing on a public road, with enough grip to the point where I didn't want to go any faster. I was obviously under the limit of the current car etc etc. MX5 with 2.5 N/A to achieve the same speed would be more fun for any road scenario. Maybe consider cams. I wouldn't boost it. The use case is just not there and it won't actually make the car more enjoyable unless you really do plan on wringing gears from 1st to 3rd (at least) at 100% WOT on a public road to 150+kmh.
    • Great if: 1. You had all of the money for everything else that is required  2. Lived in a country where you could actually do this and drive it legally on the road Sadly, neither applies to me As for the turbo, I am having second thoughts, mainly for engineering/registration legality reasons and insurance  Not saying I've finished doing stupid things that I probably should do to the MX5, but boost, and V8 engine swaps isn't on the cards Strange, but true 
×
×
  • Create New...