Jump to content
SAU Community

Intercooler Choice

Darkness_Ryda1
 Share

Recommended Posts

Darkness_Ryda1 Mentor

Darkness_Ryda1

Posted
Posted

Hey guys,

Looking at purchasing a FMIC, dont mind spending money thats needed, wanna do things once and right!

My question is what are your opinions on direct bolt on intercoolers and cutting into your chasis? bad idea to be cutting into chasis for shorter piping or is it fairly safe? i was looking at these couple intercoolers just curious to know which would be the better way to go? Any input would be great.

Thanks

post-36420-1206372443_thumb.jpg

post-36420-1206372455_thumb.jpg

Link to comment
Share on other sites
paulr33 Grand Master

paulr33

Posted
Posted

find a workshop that will supply and fit an intercooler for around $500

there should be a few workshops these days that can do them at this price

this should also include not cutting front reo bars etc and a proper install

ask them before you hand over $

Link to comment
Share on other sites
Bliksem Veteran

Bliksem

Posted
Posted

The first one is less work, but if you ever plan on running a forward facing plenum you wont be able to keep it.

Tube and fin intercoolers are more efficient, and usually dearer. APEXi used to make a Hybrid Intercooler which was both Bar and Tube...

Link to comment
Share on other sites
tridentt150v Grand Master

tridentt150v

Posted
Posted

The only thing with the first intercooler is that the piping is for a Supra?

The pipes come out on the one side like the Blitz, but they are facing the wrong way [should be facing away].

I run with a Blitz, no complaints.

Link to comment
Share on other sites
BLK33T Community Regular

BLK33T

Posted
Posted

I've just had a HDI one installed thinking of changing it to a Justjap one so I can run the standard airbox again ... very happy with their exhaust system so I'm sure I'll be happy with this also ... although I'm only gonna run 10-13psi max through it it probally overkill

Link to comment
Share on other sites
NickSix Apprentice

NickSix

Posted
Posted

I just had a jap intercooler installed by Morpowa in Adelaide, trust me.. keep away from the cheap alternative. The cooler is cheap (around $350 for kit inc piping) and the quality seems to be very good, but the piping is completely wrong (sold as an R33 R34 kit). The installers swore black n blue that they would never fit one again. Pipes too short, silicon sleeves too small, had to change the wiper motor to a smaller one to fit, spacers from the block so piping could be secured.. all kinds of hassles. Just get the Greddy kit.. so much easier and no hassles!

Link to comment
Share on other sites
Dingus Proficient

Dingus

Posted
Posted
Has anyone installed one of those just jap ones that use the standard piping on an r33?

Post up pics how it looks from the front! :):D:D

Give me a couple of weeks and I will show pics. Making payment tomorrow morning for mine, so by the time it gets here will be early next week most likely, install when I get the chance after work/the next weekend. Though mine will be painted black with black joiners, aim is stealth.

Link to comment
Share on other sites
jeffboyracer Community Regular

jeffboyracer

Posted
Posted
I just had a jap intercooler installed by Morpowa in Adelaide, trust me.. keep away from the cheap alternative. The cooler is cheap (around $350 for kit inc piping) and the quality seems to be very good, but the piping is completely wrong (sold as an R33 R34 kit). The installers swore black n blue that they would never fit one again. Pipes too short, silicon sleeves too small, had to change the wiper motor to a smaller one to fit, spacers from the block so piping could be secured.. all kinds of hassles. Just get the Greddy kit.. so much easier and no hassles!

Hmmm was considering JustJap kit, now my confidence is a little bit tattered. :ninja: So the problem was with the pipng and joins? Perhaps get a justjap intercooler and buy piping/joinery seperate?

Link to comment
Share on other sites
NickSix Apprentice

NickSix

Posted
Posted
Hmmm was considering JustJap kit, now my confidence is a little bit tattered. :D So the problem was with the pipng and joins? Perhaps get a justjap intercooler and buy piping/joinery seperate?

Absolutely.. only problem is.. it may end up being cheaper just to get the Greddy kit, i think i saw the whole kit with piping on ebay for around $500. Or just take it to the istaller and let em put on whatever they suggest, i think the hybrid or Greddy from performance shops are around the $1000 mark plus around $300 for install

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      CD009 RB Conversion

      By Dose Pipe Sutututu · Posted

      Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • tidi0x
      CD009 RB Conversion

      By tidi0x · Posted

      Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • robbo_rb180
      R32 Gtst - Track Car

      By robbo_rb180 · Posted

      If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • 180 wanabe
      370gt Stock Suspension

      By 180 wanabe · Posted

      If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
    • bcozican
      R32 Gtst - Track Car

      By bcozican · Posted

      Id like to race in the US i think alot of those track would suit me   For the s15? Youd be stuck between club sprint and the new Open Am wouldnt you depending on how much interior you have left in
×
×
  • Create New...