Removing Bog/filler

[flamo_damo]

Hey guys,

Just after some help, so I have a GTR front bar moulded into one peice and basically im sick of it cracking so I removed the bottom lip and well yeah their is alot of bog left on the front bar just layered on.

So what I was wondering is their an easier way to remove bog from a flat surfuce so to speak or is it slowly chizel off spec???

Any help would be appreciated,

Damon

[inthisglass]

you can sand it off

i dont think theres anything that will thin it im affraid

unless you wanna try acid or something

but that will just cause problems

[Trent04]

yeh sand paper mate

[flamo_damo]

Hahah damn I thought their may have been an easer way, oh wel doesnt hurt to ask! Cheers for the reply guys!!!

[Trent04]

haha no worries mate, let us kno how u go

[75coupe]

paint stripper will soften it, then you can scrap it, comes off fairly ok then or you can wire wheel it but on a fibreglass piece you don't want to be doin that...

[4drftn]

you can try heat.... bog falls out of steel panels when you heat it up... but on fibreglass or plastic it might warp in shape

[flamo_damo]

paint stripper will soften it, then you can scrap it, comes off fairly ok then or you can wire wheel it but on a fibreglass piece you don't want to be doin that...

Hmmm might try that, well its a plastic bar so I guess that shouldn't be a problem, might try this on the weekend.

At the moment I just been slowly chipping away at it!