Jump to content
SAU Community

Simple Way To Tune Fc


guricha
 Share

Recommended Posts

Simple way is to take it to a tuner.Saves you blowing something up so you can save a few dollars.

sure but i cant because there is no person who can do it.. I Have asked even in the sphincter of the universe in Istambul but thay cant tune it too, so i have no other way to tune it myself.... so if someone can link me any DIY of tuning FC it could be helpfull for me

thanks in advance

Link to comment
Share on other sites

hi guram,

lots of tuning information is in here

http://paulr33.skylinesaustralia.com/docs/...powerfc-faq.htm

Thanks for link i will try

actualy my main problem is boost i have changed lots of thing and my top is 205 KW on wheels and almost 14 PSI but i cant boost up more because of FC is not tuned and i need help from you and from this forum

Link to comment
Share on other sites

Thanks for link i will try

actualy my main problem is boost i have changed lots of thing and my top is 205 KW on wheels and almost 14 PSI but i cant boost up more because of FC is not tuned and i need help from you and from this forum

hi

i had the same problem as you with my power fc i got mine programmed by a company in the uk they one of the best skyline tuners in the uk they are called.. perfect touch they tune the.. jun lemon a very famous r33 gtr .. http://www.perfect-touch.co.uk telephone..00441992 443900 ask for rob

give them a call you would have to send the power fc to them though in the uk like i did but it's better than blowing up your engine they will put you a safe map on so you will be okay

Link to comment
Share on other sites

hi

i had the same problem as you with my power fc i got mine programmed by a company in the uk they one of the best skyline tuners in the uk they are called.. perfect touch they tune the.. jun lemon a very famous r33 gtr .. http://www.perfect-touch.co.uk telephone..00441992 443900 ask for rob

give them a call you would have to send the power fc to them though in the uk like i did but it's better than blowing up your engine they will put you a safe map on so you will be okay

and how mach you have pay for ?

Link to comment
Share on other sites

hi guricha,

do you have access to a wideband oxygen sensor?

you will be better off buying or borrowing the equipment you need and then learning how to tune your own car. a datalogit makes the job much easier but you can do it with the hand controller (commander). fc-datalogit

paulr33 guide is a great resource to use.

i would never trust a generic powerfc tune to allow for any changes you have made. you will no doubt make more changes to your car and being able to adjust your tune with each change (especially in Georgia) would be the best.

Link to comment
Share on other sites

first of all thanks for helping, there is no Dyno available here and no person who can tune FC so my only hope is SAU forum

so here is my modification on car

FC with hand controller

oxygens sensor with gauge

front mount plenum

New fuel filter

fuel pump is stock

fuel pressure reguliator

turbo KKR480 14 PSI just

stock injectors

so i have wide band sensor and please help how to begin even i dont know how to make more air or fuel, i have checked injectors and thay are open 100% is that ok, and what is next step how to flow more air and more fuel and what is best ratio for air fuel mix

if i will chanje in menu air flow from R33 to power intake or any other option does it means that am changing air flow and making more and how i can send more fuel to injectors?

please please help car makes now 205 KW and i know it can make more but knok sensor doesnot show more than 20 knocks is that ok too

and yes there is one thing when ignition is 0 its make knoks on hight boost and i have tryed to run it step by step on 1 degrees so now when am starting it am runing +6 and its ok...

Link to comment
Share on other sites

hi guram,

1. stop driving the car under load - its unsafe

2. get a new fuel pump, higher rated, either tomei, nismo, GTR pump, 044

3. upgrade your injectors

4. learn how to read AFR's and what they mean - plently of stuff on the internet

5. learn the basics of fuel injection tuning and what AFR's are safe etc

6. learn how to tune the powerFC (powerFC FAQ)

7. tune as needed

Link to comment
Share on other sites

hi guram,

1. stop driving the car under load - its unsafe

2. get a new fuel pump, higher rated, either tomei, nismo, GTR pump, 044

3. upgrade your injectors

4. learn how to read AFR's and what they mean - plently of stuff on the internet

5. learn the basics of fuel injection tuning and what AFR's are safe etc

6. learn how to tune the powerFC (powerFC FAQ)

7. tune as needed

paulr33, i know that car works under load now but i didnot accelerate it too much just moving and thats all

my point for now is to put westgate on standart position at 16 PSI with safe, and what i know there is no black smoke what means air fuel mix is lean... i have read your faq and reading now too but cant find places where i can lern to flow more air or fuel please Help

we have track where i can easy drive and tune it but how to start ?

for next modification i will change fuel pump 044 and try to buy injectors

but still i know that air fuel ratio isnot good and i should not drive like that

thanks again

Link to comment
Share on other sites

if your maxing the injectors (100% duty) then you need larger injectors

once you have that you need to tune the Air Fuel ratio - you need to understand AFR"s and what is safe and ideal etc

then you need to learn how to do it on the powerfc hand controller - SETTING, INJ MAP

Link to comment
Share on other sites

if your maxing the injectors (100% duty) then you need larger injectors

once you have that you need to tune the Air Fuel ratio - you need to understand AFR"s and what is safe and ideal etc

then you need to learn how to do it on the powerfc hand controller - SETTING, INJ MAP

paulr33

Injectors are open 100% but i didnot make it when i install FC it was in this option should i need to lower it can i damage injectors with 100% load?

as i understand and have read best ratio is 11.5:1 or max 12:1 is that correct?

and when i need to make this changes while driving right? and please link me the place where i can foun how to set INJectors map

P.S can i have your skype or any massanger of you i will disturb you few times pls:)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Yeah they sure are available for import now, its great news Matt, You need an import specialist insurer, nothing has really changed over the years about the mainstream insurance companies not touching them. I have my cars with Lumley (same group as NRMA etc) because they insure imports and have a good concept of "stable use" where as long as no more than 2 cars are being driven each day you can have them all on a good rate, I've also had no issues with claims through them. Note they won't insure a car if you take it to the track, even for an off track claim. Shannons are another option but I had a lot of trouble with their claims (they were happy to take the premiums, not so keen to pay out), and I'm sure there are other import specialists too 
    • I'm a lifelong home drummer, was in a couple of bands as a teenager/early 20's then moved to Japan and didn't play at all until 2019 when my missus and I were invited to check out the band room upstairs at a restaurant cafe here in JP. They had a full acoustic drum kit and they let me have a bash for about 20 mins. I went away from there wondering how I could not play for 19 years.... Missus bought me a e-drum kit a few weeks later (Yamaha DTX402) which is basic but lets me play at home in my tiny Japanese house.  Also have an Epiphone Les Paul and little Vox amp and delay pedal I bought for the missus because she wanted to learn to play the guitar, but she never got into it. That was about 8 years ago. I taught myself to play some 80's U2 song riffs like the Fly solo, etc and some other things but being a drummer I don't really have the dexterity in the fingers lol. Ham fisted if you will. So I kind of just mess around with the guitar rather than try to seriously play complete songs. My son on the other hand inherited all my side of the family's musical talent and is a brilliant classical pianist at 16 years old. He'll go on to do something in the music industry here for sure once he finished his schooling. I got him a Yamaha NU1XA hybrid piano earlier this year.
    • If the BOV is plumbed in as mentioned, like stock.... why exactly would it stall? It'd be like stock. Do stock cars stall with stock bovs?
    • You mean a rich spike, as the air has been metered multiple times due to the turbulent air, you end up injecting more fuel causing a momentary dip in torque and quite possibly a stall event. TL;DR, install a Haltech Elite or S3 or R3, convert to DBW, throw all ancient shit into the bin and enjoy the car.
×
×
  • Create New...