Jump to content
SAU Community

R35 Spotted Filming In The Adelaide Hills

stolen_s15

By stolen_s15,
in R35 GTR

 Share

Recommended Posts

stolen_s15 Mentor

stolen_s15

Posted
Posted

A mate from work just got back from a trip to Adelaide, where among other things he went for a drive through the Adelaide Hills on Easter Sunday.

He claims to have spotted a silver R35 GTR being filmed on a low flat bed truck, on a blocked off section of road. There were apprently Nissans parked all around, large group of asian men watching, large film crew and when he tried to approch he was not allowed past security.

He was unable to get a photo, but did save the exact location on his GPS, I'll post it up as soon as he lets me know.

I'm not sure how accurate his story is, I really want to know if anyone can cofirm it.

Did anyone else see/hear anyhing about this??

Howie Grand Master

Howie

Posted
Posted

Well if they're gonna start selling the car in Australia they're gonna need some flash ads... I think it's plausible that it was shot in the Hills, it's got some wicked roads there. So will be interested to hear from anyone who can confirm this.

Absent Community Regular

Absent

Posted
Posted

Kinda hard to believe but the Adelaide motor show is on very soon and apparently an R35 is going to be there.. nice coincidence

the Adelaide hills would be a great place to film a tricked out GTR ad.. I nice wide shot of it flexing along the mountainside roads :O

Jetwreck Grand Master

Jetwreck

Posted
Posted (edited)
I believe you. kekekegay.gif

Should still be there(not saying were there is though....sort of like the pice attached...lol).....stopped and had a look at it 45 minutes ago.....even had a sit in.....why can my wife not look or feel that good!!!...lol

damn, didn't think to take photo's....even had a camera on me....sorry

post-37023-1206676531_thumb.jpg

Edited by Jetwreck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Papichulo96
      Rb head oil drain dimensions

      By Papichulo96 · Posted

      Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • GTSBoy
      Need AC Compressor for R32

      By GTSBoy · Posted

      The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Zabuza
      Need AC Compressor for R32

      By Zabuza · Posted

      Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • GTSBoy
      Help Understand GTT Boost Setup

      By GTSBoy · Posted

      Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • Sxnjeet
      Help Understand GTT Boost Setup

      By Sxnjeet · Posted

      yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
×
×
  • Create New...