Jump to content
SAU Community

Why Would One Use An Exporter?


Recommended Posts

I was looking at importers at first but there is a recent thread about exporters.

why would I use them?

I was looking at the services an importer provides and it seems importers takes all the hassle away (from buying the car all the way to compliance).

What service does an exporter provides other than selecting/buying the car and putting it into a boat?

Thank you

ps. I did a quick search and nothing came up.

Edited by jarthel
Link to comment
Share on other sites

The only reason you'd use an exporter specifically over an import broker is that you then don't pay the import broker their service fee, so you save a little bit of money.

The reaons you'd use an import broker and pay that bit more are:

- the import broker is probably more familiar with local import laws and can make sure you don't get into trouble there

- an exporter will only have very limited access to a small number of cars from a small number of sources so that will limit your choices a lot

- SOME exporters are not very good and don't care about burning bridges with a one off customer who you'd be as there's nothing to lose, whereas when exporters are dealing with import brokers they have long term relationships to worry about and so can't afford to screw them over

- GOOD import agents will know which exporters to AVOID. Probably the biggest exporter who sells cars to members of the general public in Australia is actually sadly one of the dodgiest and we refuse to deal with them, for example. SO MANY people we've seen think they're saving money by going direct to this exporter, when in reality they get screwd on price, screwd on condition and end up paying a lot more for a poorer car than if they'd gone with an import broker whose first decision would be to avoid these guys. It annoys me so much.... :P

- importers will know what to do when the car arrives, will help with customs clearance, finding a good compliance workshop who does good work at good prices, and a whole lot of other things.

- import brokers have no vested interest in cars since they don't own them, so they can give honest opinions on condition and weather a car is worth buying or waiting for a better one to come along.

And more reasons but that's the basics.... ultimately you need to decide if those points enough to justify paying an import broker, or if you'd rather forego those things and try to save a bit by going to an exporter directly.

Note: I AM an import broker (J-Spec Imports) so assume whatever level of bias you think is appropriate here :/

Ben

Link to comment
Share on other sites

The only reason you'd use an exporter specifically over an import broker is that you then don't pay the import broker their service fee, so you save a little bit of money.

snip...

Well, the amount of money the importer requests is quite small in the scheme of things (depending on the value of car). :P

thank you. I suppose that somehow confirms my suspicions on the use of exporters instead of importers. :/

Edited by jarthel
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...