Nur Motor Arrived

[padey]

My Nur motor finally arrived and is sitting on a crate in my garage.

Heavy bastard.

I'm thinking of leaving the bottom end and getting some headwork done.

I haven't really investigated it, so thought i might air my thoughts here. I gather some port work would be good, a few oil control mods, and throw a HKS catalogue at it should do it?

What have most you guys done?

I'm not looking for a big turbo/high rev monster. Just a fat midrange, and tough-as-teeth donk for some track work would be very nice.

[N1GTR]

Sexy!

HKS 2.8 kit?

[PIG747]

that hot..

How much did it set you back???

[lingeringsoul]

did you have to sell a testicle and a kidney for this?

[evil_weevil]

Nice one padey!!!

So your GTR is still on the road at the moment mate?

Yead I'd certainly be looking at the oil control - as they say (sometimes!) prevention over cure

[Sheng]

Wooa!!

You know theres a hills meetup soon

[padey]

did you have to sell a testicle and a kidney for this?

No, I've been getting a few pm's about this, so i'll debunk the myth that these engines are expensive.

I searched yahoo for months for a Nur from a private buyer. Found one, asked a few questions through Zac at Slidewise and got a Jap mate to ask a few more. Everything came up apples, so bought it for $3200. Zac shipped it. Add a bit for Zacs work and freight.

That's it

Nice one padey!!!

So your GTR is still on the road at the moment mate?

Yead I'd certainly be looking at the oil control - as they say (sometimes!) prevention over cure

Yeah mate, still on the road and running well. Some lowlife tried to break into it recently. The worst thing is it's got to be someone local, or someone local told someone... et al.

Oil control FTW. The head is coming off for oil control, and it aint coming off again for a long, long time. So i thought i might get the head worked at the same time.

Wooa!!

You know theres a hills meetup soon

Cool, i'll keep an eye out for it.

[evil_weevil]

Padey,

Nice one mate, just keep running the current motor to "Kablamo!!"

Oh, you doing the skd pan/motorkhana with SSCC on saturday???

[Duncan]

I would get the bottom end pulled apart and checked for clearances and tolerances. check the rods and maybe get them cleaned up.

add restrictor to the block

some light porting to the head (and releive it if you want to run high lift cam shafts one day)

external oil return from the head to the sump

put extended sump on it.

put cam gears on it

then off you go!

[Blitz]

Nice engine Padey - the NUR motors really aren't as expensive as everyone seems to think.

So...when is the stroker kit arriving?

[lingeringsoul]

3 grand huh, that ain't so bad.....so it was a complete motor with everything including cheese lettus and tomato?

[N1GTR]

No, I've been getting a few pm's about this, so i'll debunk the myth that these engines are expensive.

I searched yahoo for months for a Nur from a private buyer. Found one, asked a few questions through Zac at Slidewise and got a Jap mate to ask a few more. Everything came up apples, so bought it for $3200. Zac shipped it. Add a bit for Zacs work and freight.

That's it

Wow, thats cheap!

Whats shipping worth for something like that if you dont mind me asking?

[blk180]

Nice to see it has shown up Andrew, you think of going GT-SS, 2530s or 2860 -5s. I see alot of the VIC GTRs are going back to stock cams with cam gears.

[padey]

Nice to see it has shown up Andrew, you think of going GT-SS, 2530s or 2860 -5s. I see alot of the VIC GTRs are going back to stock cams with cam gears.

Hi Brad,

I'll stick with my 2860-7's for now. They aren't big, but do the job for now.

re the cams, i'm thinking more and more that i'll keep the head stock, do some oil control mods and leave it there. I've wasted enough money on cars for three lifetimes, and there is no need to waste more.

padey

[Angus Smart]

Ahh nice work Andrew! Yahoo!! mines still in japan cant wait to have it sitting on my garage floor.

did you get it from flatwell racing or whatever they are called? tho i think i asked yout his before? 3200 is alot cheeper than what they advertise

http://www.flatwell.jp/?sid=30&cid=319

I've got some big plans for mine and i am still silly enough to spend money on cars

Andrew.

[Sinful]

Have you had it open yet to see inside padey?

[Angus Smart]

Hows this motor going for you Andrew??

Have you started work on it yet??

I'm still waiting...........

[HuH]

Wooa!!

You know theres a hills meetup soon

What are the details on the Hills meet? I'd be in that for sure, being a Hills boy myself.