Jump to content
SAU Community

Recommended Posts

Hey all. I am wanting to get more into the track n drift scene in the near future and i am trying to decide on what car i should be looking at. I am prob goin to use the car as my daily most of the time, then take it to track days etc for a bit of fun.

I have been looking at the following cars to use.

- skyline r32 2ltr GTST

- skyline r33 2.5 ltr GTST

- silvia SR20 DET

- 180sx SR20 DET

- 200sx SR20 DET

The car of choice needs to be reasonably fuel efficient etc. I would like a 4cyl car but i do like the 6cyl's charm :P I am just curious to know if a r32 gtst would be much more fuel hungry than a SR 20 engine? Which would give me better power output for drift or track stuff?

The car will need to be registered and i will drive it around untill it gets canned then prob trailer it anyways to track days.

Is it a stupid idea trying to combine a street car and track car. I would prefer it to be registered tho cos it will be far more use to me.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/212425-what-to-buy-as-a-dailytrack-car/
Share on other sites

They are all pretty good cars to use as the type of platform you require, just got to look worldwide to see that, my R32 gtst gets 550+ k's per tank if I'm not giving it some, love the balance of it too, am about to do suspension, then power-up-cant wait hahahahahahahahaha(maniacal laughter)

Either:

* Silvia with SR20DET. Lightest of the bunch.

* R33 with RB25DET. Biggest engine.

What you choose depends on what you can afford and your driving style. The R33 has a longer wheelbase and should therefore be more stable in the high speed stuff, but the S13 will be more nimble. Finding performance mods for any other cars should be easy as they're all popular.

S13 should be cheaper to maintain, though.

I'd also go for s13. You can go pretty fast in them if you spend a bit of time on the handling side.

The probelm is that it's hard to have a daily/track hack.

Mine is basically a registered track car these days. I drive to the track, flog it, and either drive or limp home depending on the damage :P I would not want to drive my daily transport on a track, you couldn't push for times as you'd be scared to damage it.

It would have to be between the s14 and 33 ....

The SR and RB25 are good bases for bolt on modifictions and will hold 250kw somewhat reliably.. the 25 has the cubes to go a bit further but the s14 is lighter..

Edited by Tomek

my r33 takes around 12L/100km driving normally which is pretty good. you can also pick one up for really cheap as theres just so many of them for sale. the fact that its newer then the s13 and r32 also give you something to consider. plus the rb25 is just a damm good engine that would probably outlast the sr20 and the rb20

Hmm yeah i would like an R33 but only looking at spending maybe 10k at the most on a car. I was thinking maybe of getting a R32 cos they would be a bit cheaper etc. I also would hate to smash up a good car that has good paint etc. So i thought older car would be ok cos it will have dints etc already. I guess if i have an older skyline i can always build the motor up better once it F!*ks up.

track use of a daily requires the right sort of backup. Money (to replace worn things & fix broken things). Good facitities in your shed for getting things done before the weekend is over.

If you need the car to drive during the week then either a backup bunky car or the above things.

It's going to cost you to enjoy the track often so why not a fairly stock GTR? in for a penny in for a pound.

Hang on a minute...$10k?

Skylines are out for you mate. Maybe an R31.

You can't afford it right now I'm afraid if $10k is your budget.

My thoughts are maybe buy yourself an unlicenced bunky , a car trailer and some tools/equipment and gradually do it up. Or just invest your money , grow it and then buy someone elses track car misery and save time and money to get started.

Hmm i seen quite a few r32's for sale for less than 10k and many 180sx's. I could afford a more expensive car but i dont really want one thats in the best body condition etc. I not worried bout that side of it. I hope to get something cheapish then build it up a bit into a toy for the track. I already got a large amount of tools to fix stuff etc. I would not be so worried about damaging it and not having it available for the next wk as i have my R33 to use and my current daily driver and my motorbike. So i should be right if something happened.

I just looking for a good base to use and build on. I will be able to afford engine rebuild etc if something happened. Was just trying to find a shit box for under 10k.

RB20DET is probably cheaper second hand than SR20DET, RB25DET if something does go wrong with the engine.

R33 chassis supposedly has the better front suspension setup with R32 second and S13, S14, S15 last.

Also R33 has the 296mm R32 GTR style front rotors vs 280mm on R32, 280mm on S13??, S14, S15.

R33 has a stronger gearbox and drivetrain than R32 or S13, S14, S15.

Looking at the above, R33 chassis without the RB25DET motor for under 10K and fit the lighter

SR20DET or cheaper RB20DET. Or a single turbo RB26DET (solid cams) with around 400hp.

Edited by SKYPER

dude buy the blue cefiro? save up another 2 grand and it's yours!

check the cefiro section it's for sale in there, you have a choice of 9grand to buy as a pure track car or 12 grand to have it complied and road rego'd

GREAT way to get a wicked sick hot looking track / daily

but no offence but you're pipe dreaming at have 10K for a track AND daily...

Hey. Thx for the feedback. I am not entirely sure what way i am going to go yet. I can save for longer and get something more expensive etc but i just dont like the idea of smashing up a nice 10K + car. Meh i will prob get over that problem soon enough. I also have been thinking of the idea of getting a rolling shell and putting a rebuilt motor into it etc. All tho i guess once i muck around getting everything done to it i would prob have paid more anyways?

Maybe i should just sit tight and save then see where things go.

Thanks all

you only smash it up if youre a bad driver :yes:

He He yeah i am reasonably good at driving. Used to have paddock bombs etc so used to sliding round etc. I know for sure that i am a hell of alot better driver than most of the dumbasses out on our roads. I nearly get into an accident every month due to some dickhead that can't drive for shit. LOL there is one roadabout near my place that i nearly been cleaned up at about 5 times. Always when i am turning right at the road about i get people that don't look or give way. Last incident was only 2 wks ago when this guy come racing towards the roadabout in his 4WD towing a tandem trailer. I seen him comming as i turned right and could see he goin fairly fast. Sure enough he locked it up comming into the roadabout. I just stopped in the roadabout and waited for him to slide to a stop before continuing to turn right. I dunno what he was thinking. Dumbshit.

Well thats just one of my many stories. I am sure you all have some.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As GTS mentioned, it takes a bit of faffing, some fiddling and a little modifying.  With the strainers, you can buy different styles. Some sit flat on the pump, some angle down.  Here are some photos of mine, ignore the ugly welds lol. 
    • The smart thing is to actually locate the pump at the right point down the hanger, so that the strainer can stay sticking out at a right angle, but near the bottom. This is the perpetual hassle with retrofitting any different pump to the factory hanger. Some just go where you need it to, some need fiddling and faffing, and modifying of stuff.
    • Some updates. After a lot of praying and some inspecting of crank threads, we've found that they were both kinda munted but nothing seemed terminal. The other option was drilling and helicoiling the crank. That is obviously the last option so we decided to at least try to get a OEM GM bolt in to GM Specs. So after honing/linishing the balancer from it's .002" interference fit to a .0018" to .0015" to .0013" it eventually slotted on to the crank. ATI state the interference is nominally 0.0007-0.0009... so it's still snugger than ATI reckon and explains the issues we had to fit the thing to begin with. New GM bolt went in at 37 ft/lb then torqued 140 degrees after which was EXTREMELY   but it tightened up to 140 degrees and it was a lot of force. So all things considered, the balancer is secured to the exact specs that GM want with the OEM Stretch bolt, (that ATI say you can use..) and the balancer itself is seated and snug AF. So WOO. Engine is now back in the car with lots of swearing. Bellhousing bolts done up, driver side manifold is on, AC Compressor and hard lines are back on the car. Next step will be to connect various engine bits/wiring/intake/radiator etc. Then oil and coolant and ... test start it? And of course, looking into this issue... which actually doesn't look so bad - It looks like it can be twisted back into shape with a set of multigrips. Anyone wanna buy my bonnet? Boy it looks good over there and sunk cost sucks.
    • Also this may be a stupid question, but how would you recommend getting the strainer on a downwards angle ? as they tend to obviously clip to the bottom of the pump which usually sits level 🥴
×
×
  • Create New...