Jump to content
SAU Community

Recommended Posts

Hi Everyone,

Im considering a pair of bride seats but want to know how the compare to the R33 GTR factory seats.

Sure the bride's are lighter, but how do they compare as far as comefort goes... especially when going for a long drive of a few hours.

Also how do they compare as a seat to hold you in place when your cornering hard?

I've never seen a bride seat up close so i have no idea what the quality is like either. Are they as well made as a factory seat?

Pic of the seats i am considering is attached.

Cheers,

Ian

post-26553-1206703818_thumb.jpg

Edited by Vspec R33

Been for a ride in a friends car with Bride Recliners (ergos i think) Found them to be firm and quite narrow(so they wouldnt be comfortable on long drives, but great for trackwork). They appear to be well made, although i did notice some fading from the sunlight on the sides of the seat. I prefer my 33 GTR seats they are a good allrounder.

Is there any reason you are considering bride seat if you've never seen one or sat in one, as they are one of the most expensive? is it just for the brand name?

I got a sparco racing bucket and I think that is great... Never sat in a gtr seat but the gtr seat is still a reclinable and I feel would never match a full bucket...

I've done a few hours in it in one stint and while its a little warm on a hot day, I forgive it for that since it holds me in snug.

Oh and thats a sparco pro 2000

Edited by 75coupe

Truth be told the seats are for my vw. I like the GTR seats a lot though so i figured I'd either stick with what I know i like and get a pair for the vw, or i'd go something light weight, carbon fibre/kevlar/fiberglass or whatever. They have to be strong though too, and ADR approved. The vw is being rebuilt as a motorkarna drag and car, so I need to keep the weight down where possible as there is a fair amount of additional steel re-enforcing in the chassis now.

I dont care about the brand name and they would be covered anyway. Im not into showing off brands. Let the companies pay for their own advertising.

I've been looking at sparco's too. They seem decent enough.

DLOOOK, how wide is your ass that they are too small for you? Or perhaps what size chicks's ass would be a good fit to the seat?

Edited by Vspec R33

Brides are not adr approved. and only some models are FIA approved.

If you want ADR approved, and brilliant seats to boot, get some VELO's.....

Made in Aus, ADR approved, different sizings, FIA approved as well, and cheaper than the Brides.Look great, different colours, and, a lot more comfortable. :blink::P:thumbsup:

  • 4 weeks later...

I was looking at the Bride recliners the other day too. Very nice. Id really like to get a seat in them before shelling out for something i might not like though. I think R34 seats are the way to go, because they hold their value and if i dont like them i can move them on easily enough.

Well ive decided to stick with the old seats for a while till the car is driving again. Ive made much stronger seat mounts this time because last time I was out street tuning the car it tore the drivers seat spot welds from the floor in 3rd gear and I ended up in the back seat.

For those that PM'd me and wanted to see a pic of what Ive built.. here is the chassis nearly finished.

DSC00943.JPG

Specs are that its a 1966 VW chassis base, very modified and re-enforced

Wheel base, wheel track, steering angles etc are all identical to a Porsche 1992 968

Alignments of camber, caster, front and rear toe are all adjustable, and are set to a track tune for a 911, being a rear engined car.

1992 Porsche 968 front A-arm's, spindles and 4 spot porsche/brembo brakes

1992 Porsche 968 alloy trailing arms with 4 spot porsche/brembo brakes

1986 Porsche 911 turbo 4 speed, rebuilt by albins. Handles over 750hp, but it will be seeing about 500 max.

Hydraulic clutch conversion

Custom whiteline anti roll bars

Custom valved Tein super streets, (modified honda civic)

Porsche 924 rack and pinion steering conversion

Hargett racing short shifter

Porsche 996 Cup3 18x8 and 18x10's with RE55 semi slicks

Aiming for about 850kg dry weight with a roll cage.

Was engineered and approved 2 weeks ago. 100% road legal modifications. 14 modification codes in all. The silver vw body in my signature will be on it in about 2 months, and the engine in about 2 months after that. Engine parts are still being fabricated at the moment.

Yes I am crazy but building this in my garage has kept me out of a padded cell.

Cheers,

Ian

Edited by Vspec R33

i had a bride seat in my rx7 race car and well, ive got gtr seats in my gtr.. lol

its such a hard decision really.. like the gtr seats are fkn awesome, but so were the brides lol

They both look great, not that it matters coz when ur sitting in them, u cant see them :D

as far as value goes... dont brides cost alot?? they did 4 years ago :)

Yes the Zeta III's do look nice. Im sitting on the edge of getting buckets and having to un-bolt them every time i need to get into the back of the car, or keeping reclinables of some sort.

That VW is insane!! I'd love to do a project like that, except I cant afford it, Parents won't let me have the space, and don't know what I'm doing ;).

Bride seats usually look better and more sporty then the GT-R seats, but not sure which is more comfortable

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...