Jump to content
SAU Community

Recommended Posts

***Please do not post unrelated or opinion posts. If you would like to discuss price, PM me.***

Item: HKS Pod Filter

Age: Used for about 1 year

Condition: Great

Price: $70 neg. ->$50 neg.

To Fit: (What car) R33, maybe others?

Location: Campbelltown

Contact: PM

Comments: This pod filter has the support brackets and bolts to fit straight on. I had it fitted to an R33, but may fit the R34 or other model cars with/without the support bracket. Believe it is one of the highest flowing pods. It produces quite a loud induction noise.

p4010125dl1.th.jpg p4010126kg1.th.jpg

Item: K&N Panel filter

Age: Used for about 1 year

Condition: Great

Price: $70 neg. ->$50 neg.

To Fit: (What car) R33 , maybe others?

Location: Campbelltown

Contact: PM

Comments: This filter is a direct drop in replacement for the stand size air box in the R33. It may also fit other skyline models, but im not 100%.

p4010127du2.th.jpg

Item: NGK Iridium Plugs

Age: Used for about 1000km

Condition: Excellent

Price: $80 neg. ->$50 neg.

To Fit: (What car) R33, maybe others?

Location: Campbelltown

Contact: PM

Comments: NGK iridium tipped spark plugs were bought brand new for around $22 each. They are claimed to have a life of about 100,000km. These were fitted to an R33, but they may fit other models. Please check first. Model BKR6EYA.

p4010128sp5.th.jpg p4010130rh9.th.jpg

Item: Personal Steering Wheel

Age: Few years old

Condition: Good

Price: $80 neg. ->$50 neg. *SOLD pending payment*

To Fit: (What car) R33, maybe others?

Location: Campbelltown

Contact: PM

Comments: Personal brand steering wheel. Was fitted to an R33, but may fit other models. Comes with the adaption part as shown in the pic. Very nice to use. Also has a Momo horn centre.

p4010131pf0.th.jpg p4010132xm1.th.jpg

Item: Carbon Fibre Air Partition

Age: Used for about 1 year

Condition: Great

Price: ***SOLD***

To Fit: (What car) R33, maybe others?

Location: Campbelltown

Contact: PM

Comments: Carbon Fibre air partition fits around a pod filter. It fits around and shields the air inlet and over the intercooler pipes and has a top shield so hot air can not go over. Also has a cutout for the stock cold air inlet to provide cooler air to this section. Looks very cool fitted and spices up the engine bay. Sorry I do not have a pic of it fitted, bit hard to explain. Took a picture of the weave if you need to compare.

p4010133oa6.th.jpg p4010134rm1.th.jpg p4010135pi4.th.jpg

Item: R33 Stock Dump Pipe

Age: Used for about 70,000km

Condition: Good

Price: ***SOLD***

To Fit: (What car) R33, maybe others?

Location: Campbelltown

Contact: PM

Comments: Stock R33 dump pipe in good condition. Minor scrapes on the underbelly.

p4010136no5.th.jpg

Item: R33 Stock Intercooler

Age: Used for about 70,000km

Condition: Good

Price: $50 neg. ->$40 neg. *SOLD pending payment*

To Fit: (What car) R33, maybe others?

Location: Campbelltown

Contact: PM

Comments: Stock R33 Intercooler with the elbow pipe. Also has another part, but i cant remember if this was from the intercooler or the dump pipe, but it will go with whatever it is from.

p4010137zm5.th.jpg p4010138bu8.th.jpg

Item: Two Plastic Body Panels

Age: 70,000km

Condition: Good

Price: ***SOLD***

To Fit: (What car) R33

Location: Campbelltown

Contact: PM

Comments: One is from the front nearside wheel inner and im not too sure about the other. But they are there if you are missing them.

p4010139pd2.th.jpg p4010140mu8.th.jpg

Item: N13 Pulsar Air Box

Age: 220,000km

Condition: good

Price: $10 neg. ->$5 neg.

To Fit: (What car)

Location: Campbelltown

Contact: PM

Comments: The air box is from an N13 Nissan Pulsar. But can be converted to other cars if you are crafty.

p4010141mw2.th.jpg p4010142sr1.th.jpg

Item: Push Bike

Age: Refurbished

Condition: Good

Price: $50 neg. ->$40 neg.

To Fit: Person

Location: Campbelltown

Contact: PM

Comments: I rebuilt this bike from the ground up as a bit of a hobby. The whole bike was stripped back to bear metal, undercoated and then resprayed in a blue metallic. Paint alone was about $50. All the chrome is original was hand sanded back. Most of the rust was removed, but it has a little bit here and there. The chain ($10), inner tubes ($10) and handle bars ($60) are brand new.

p4010143cx8.th.jpg p4010144ds5.th.jpg p4010145vm4.th.jpg

Item: Push Bike

Age: Old

Condition: Average

Price: $5 neg.

To Fit: Person

Location: Campbelltown

Contact: PM

Comments: This was going to be my second project bike, but my interest ran out. Would suit someone who wants to restore it. It runs, but would need some new parts to make it rideable. Tires are flat and it has a bit of rust about. But the frame would look nice if it got redone. I would probably through this bike in if someone bought the blue one above.

p4010146ub3.th.jpg p4010147dn2.th.jpg

Item: Exercise Bike

Age: Old

Condition: Good

Price: $5 neg.

To Fit: Person

Location: Campbelltown

Contact: PM

Comments: White exercise bike with strap resistance. Works fine as far as I can remember, just do not use it anymore.

p4010148ci6.th.jpg p4010149bj3.th.jpg

Edited by lastlineofdefence
Link to comment
https://www.sau.com.au/forums/topic/212918-garage-clean-out-price-dropped-7408/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
×
×
  • Create New...