Jump to content
SAU Community

Recommended Posts

yeah champ its the wiring that needs checked...... its more than likely whats called an "earth whine" which just means that the earth wire needs some attention.... but it wouldnt hurt to get all the wiring checked out as i have had some pretty big systems in my time and i know how annoying an earth whine and other engine sounds can be when u want ur system to sound crystal clear...... what brand of sub and amps are u running in there champ???? if ur interested in some clarion subs and amps pm me and ill send ya some pics and details of my gear..... its all basically brand new.... i have had the system for a while but have recently replaced the subs with new items of the same model purely becuz im a perfectionist lolz or if u wanna grab my msn off my profile and we can chat there about what u should do with the wiring situation

Cheers for the comments guys, but I can't take credit for it, I bought it with the stereo in it. The amps are Blitz, 1x1000w and 1x5000 which I'm pretty sure are cheap ebay items? And the subs are Sony 15" explod 3000w in custom boxes which he didn't line with any dampers, so that's a job for this weelend. Thanks for the offer of amps etc, but will stick with what I've got for a bit. Getting married next year (yeah I know,lol) so no $'s for luxury items at the moment. That's why I bought the skyline. last chance before I don't have 100% say in where my dollars go.

Thanks for the help too, will have a look over the whole wiring and see what I can find.

Skyline on!!!!

:rant:

post-48987-1207114711_thumb.jpg

Dude, have u tried to put in an inline filter which cancels the engine noise coming through your speakers? Goto jaycar or an audio specialist and they will provide you with a filter. Fixed all my mates problems when i got him the filter. Aint that hard to install aswell.

MR_XTC

Howdy,

cool, it already has a filter on it. So will check all the connections etc on the weekend. Hopefuuly that will fix it. Am just turning it up loud till then so I can't hear it,lol...

Cheers

post-48987-1207168668_thumb.jpg

Is this different to alternator whine?

I found this but I don't know who wrote it, someone on the internet:

"As mentioned earlier, I found a harness that runs in that bay-area, and behind the AC unit that has MASSIVE electrical interference. I could hold the rca's near it, and the whine was louder than the music (at mid-levels).

If you can't test it that way, then grab a 3.5mm stereo mini jack (same as your earphones) to RCA boot, and use the ipod plugged into them, so you're nowhere near the body.

If that is still noisy, change your RCA cable... use a short one to test with the ipod to the amp. Grab one out of your TV/DVD player and test with it. If the noise is still there, try and borrow a friends amp, and retest all of the above.

Turn your gains down on the amp. Put a massive earth on the battery.

OR use a Ground Loop Isolator from autobarn etc.

"

This article also talks about alternator whine:

http://www.skylinesaustralia.com/forums/Ca...dio-t94069.html

But your problem may be different....

EDIT: re-read your problem, it doesn't sound like alternator whine....but I don't know that much about car audio.

dude u need to ground the muthaf*#ka up

i had it b4 and made me crazy

the filter works a little bit but makes the quality shit

(reduces bass)

bcoz u runing sum high power gear

i sugest u double ground your equipment,

even add anotha ground coming from the batterie

should fix the problem

^^ english my friend - speak it?

go to your local audio store grab a ground loop isolator. it is a patch for the problem but in you case will be easy to implement.

  • 2 weeks later...
Is your power cable running up the same side as any of your RCA's? Having RCA's too close to power cable will cause this noise..

That's most likely the problem. Exactly what happened to me :thumbsup: But the RCA's going down one side of the car, and the power cable to the amp on the other.

Howdy,

I think they are, the guy who I bought it off put in the stereo and I don't think he was all there. Unfortunately I've been flat out with work for the last 2 weeks and haven't had a chance to dig too deep into this problem. I'm going to try and get onto it this weekend. Thanks for all the help, it's been invaluable. This site rocks!

Cheers to all!

post-48987-1208381922_thumb.jpg

hi, i had the same problem in my pulsar, i added all the off the shelf filters and stuff and it still was there, i tracked it down eventually to poor rca leads, which was the last thing i thought it could be but it turned out that the rca leads that came with the wiring kit were not properly shielded, that is the shield did nothing, it is supposed to connect from one device to another, i went out and bought a high quality set of rca leads and that ultimately fixed the problem. BEWARE OF DODGY RCA LEADS, EVEN IF THEY LOOK COOL.

The best investment any car enthusiest can make is a good quality multimeter, like from altronix or jaycar, mine cost me 10 bucks but potentially saved me hundreds by not having to take the car to a auto elec.

another thing you can try is getting a ferrite core from dick smith or jaycar etc and completing as many turns as possible of the speaker wire around it, this will eliminate most RF interference by not passing it into the speaker cable but allowing audio frequencies to pass.

dave.

When teh car is on ACC you dont here it but wen teh engine is on it starts to happen am I right?

I think you might have to connect RCA wires from the headunit to the amp. Similar problem I had but mine sounded like the turbo coming from my speakers?

I have a similar problem, but mine's caused by the grounding from the battery to the Chassis to the engine block.

I ran 4 guage power from the battery to the amps in the boot, ran speaker wires down the other side of the car, did all the rules, but got the noise.

When I placed another 4 guage wire on the negative of the battery, and to the chassis, the noise vanished straight away, so something to check before ripping all your stereo gear out is the basics, lift the bonnet, have a look at the negative wire, especially in the R32's, as mine's only slightly bigger than an 8 guage earth, completely inefficient for anything more than a stock headunit.

B.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If the RB29 box in the car is a push clutch, then yes, you will need to deal with the pull clutch on the turbo box. You either buy a pull clutch and don't use the old one, or you do the things needed to convert the turbo box's clutch arrangement over to push. Which is a bit of a f**karound. "Making" a custom tailshaft is the easy part. But you will need to source the front clip yoke - the bit that goes into the output of the gearbox. These are not as easy to find. They are out there, but they don't grow on trees the way that they used to.
    • Indicator bulbs are way too bright to use as a "corner marker" (we call them parking lights too). Sure. Go ahead and do it. But realise that you wil need to come up with all your own wiring to do it, as no-one will have a standard howto worked out for Skylines. It's just a matter of abandoning everything that Nissan have done and starting from scratch. You'd probably be better off retrofitting tailght/brakelight globe bases into the front indicator housings and using the taillight circuit for your corner marker and the brake light as the indicator. You'd need to work out how to kill the marker circuit while the indicator is flashing, otherwise it won't flash on-off, just bright-less bright.
    • Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
×
×
  • Create New...