Jump to content
SAU Community

Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

lol, there's no such thing as too cheap, if someones offering them to you for less you take them :laugh: and where is it? wonder if they do falken tyres :P

it was steve's wheels in sunshine (berkshire rd). preety sure they would do falkens. give them a buzz

Man, Tempe Tyres is so cheap! $260 each! If only they were in Vic or there was a place in Vic that had these prices.

In Vic the cheapest so far I've found is Steve's Wheels @ $319 each.

I just called them both. That's a $60 difference!

Tempe are probably so cheap because they sell so many so they buy in bulk. I bought wheels from tempe a few years ago and the shipping to get them down here was only $85. Might be worth buying them there and just getting them sent down, i'll go in with you, get 8 they might even do a better price.....

Tempe are probably so cheap because they sell so many so they buy in bulk. I bought wheels from tempe a few years ago and the shipping to get them down here was only $85. Might be worth buying them there and just getting them sent down, i'll go in with you, get 8 they might even do a better price.....

Yeah, unbelievable really. I told one place i rang up that they have to beat $260... the manager rings me back 5 mins later and says there's no way they can get even close, their *cost* price is $290 per tyre! That was Beaurepairs or something...

Anyway, i've ordered mine from the local Tyre Plus just up the road from work corner Ferntree Gully rd and Springvale rd. $320/ea. fitted and balanced. I only needed 2 for the fronts anyway. When you add up all the shipping costs and fitting and balancing by a local shop, it'll probably work out around the same.

the trick is tempe import direct from japan and skip the local distributor, just like nengun etc with other car parts. they have terrible service but excellent prices

That means they're parallel imported, right? So, no local warranty aside from the retailer warranty?

Bit of a worry if the tyre shits itself and puts you into a pole.

lol same argument for any import car....who would buy a car from nissan oz and pay them a cut for nothing?

and the tyre retailer still is required to warrant their goods under trade practices act. and they are the same tyres from the same factory.

Dont mean to jack the thread here, but seems you guys are paying way too much for tyres in those sizes 235/40/18 and 265/35/18,

i'll just say look at my thread before theyre gone :)

(dunlop direzza dz101)

:

THREAD

Dont mean to jack the thread here, but seems you guys are paying way too much for tyres in those sizes 235/40/18 and 265/35/18,

Were talking about falken tyres though, not the dunlop ones your selling....

  • 1 year later...

Sorry to revive an old thread but figured better than posting a new one-

How many kilometers did you get from your set of 452's? Assuming mostly daily driving with the occasional hills run or track day.

These or some KU31's look to be my next tyre... a google revealed some Mini owners loving KU31's

  • 2 months later...
how much are the FK452s in 285/35/18? I've got 285s on my car all round at the moment, but they're Sumitomo's (approx $390 to $400 per tire at that size)

I was going for smaller tires this time to hopefully get better performance/grip even though it's slightly slimmer tires.

I've got 2 x 285/35R18 Yokohama V103 in my shed you can have for $350ea

Just had some 452s fitted last weekend...

no offence but i have had more than one set of tyres that have been brand new and I've gone "wow these are great so much better than my old tyres". You have compared shiny new fresh rubber with no heat cycling to harden them, with old tyres that have had hundreds of heat cycles, no tread and old hard rubber.

The true test of a tyre IMO is what it feels like when it is half worn. I ignore anyone who gets new tyres and posts about how good they are. I'm currently running RE001 and they are decent, especially for the money. Better than the 3000A's I had on it before but I would like a bit more wet grip if possible. I may be asking a bit much :D The RE001s have lasted about 20,000km for me so far and they are half way gone.

Have only tried the 326's in Falken's range and they make a wooden wheel from a chariot look grippy.

I have been through 4 sets on FK452s already in 2 separate cars. Never let me down both in wear and grip. I like to stick to a good thing when I come across one so I think my opinion counts.

The Falken 326 were the bottom of the range made for taxi tires so I wouldnt use them even if you paid me to, so no comparison there.

no offence but i have had more than one set of tyres that have been brand new and I've gone "wow these are great so much better than my old tyres". You have compared shiny new fresh rubber with no heat cycling to harden them, with old tyres that have had hundreds of heat cycles, no tread and old hard rubber.

The true test of a tyre IMO is what it feels like when it is half worn. I ignore anyone who gets new tyres and posts about how good they are. I'm currently running RE001 and they are decent, especially for the money. Better than the 3000A's I had on it before but I would like a bit more wet grip if possible. I may be asking a bit much ;) The RE001s have lasted about 20,000km for me so far and they are half way gone.

Have only tried the 326's in Falken's range and they make a wooden wheel from a chariot look grippy.

Dude a couple of things:

A. You do realise that you are replying to a post from 2 years ago?!?! I'm guessing the dude has probably bought new tyres by now...

B. The Falken FK452 is a fantastic tyre that supplies a ton of grip, progressive breakaway, as well as good wear and low road noise, they are also unbeatable bang-for-buck when compared with the competiton

C. As you have admitted NEVER having driven on a set, I'd say you are in no position to comment

D. You are clearly a twat :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Could someone post some pictures of the factory Jack , tools, spare tire and how they were in a 1998 ER34 2 door skyline originally?
    • UPDATE: Hi all!  As we are getting towards the end of this thread where I’ll showcase final dyno numbers and graph, I wanted to provide an update. Tao from HyperGear has done an amazing job building the custom divided T3 housing for the G30. Communication was flawless, price was great, and now the housing is estimated to arrive in 7-10 days! Very very pleased. I must add, if someone is looking for an affordable turbo and end up reading this thread, I would recommend HyperGear. Genuine brands are the way to go as their proven reliability, predictable performance, and there’s a plethora of information available for specs, flow, and more. This HyperGear recommendation is based on their excellent communication, dedication, and willingness to listen to their customers. I particularly liked their ability to create custom adaptations tailored to specific needs, which is a HUGE benefit over other brands. And if we consider the HyperGear provided dyno results, it adds reassurance knowing their turbos can compete against genuine brands. Next update will be after the dyno!  
    • I've previously seen people post up "dress up bolt kits" for RBs but don't remember seeing them specify the full contents. I can only really suggest you grab the verniers and start measuring, and keep in mind the cam cover and timing cover bolts are both quite specific with a wider unthreaded section where the bushes sit, that will make it hard to get aftermarket replacements which tend to be all thread (set screws) or for longer bolts a flat section with a shorter threaded section at the end
    • I believe there was a similar one posted by @duggyphresh. They were re-routing their battery positive cable in the way I am also trying to achieve. Sorry, I’m new to this forum, so was a bit late to the party by a few months and so reignited the old thread, as I wanted to know how they got on with doing it.
    • Wasn't there a thread on this very subject just a few weeks ago?
×
×
  • Create New...