Jump to content
SAU Community

Z Imports Closing Down

sskylinee

By sskylinee,
in South Australia

 Share

Recommended Posts

sskylinee Proficient

sskylinee

Posted
  • Author
Posted

sale is on now

he'll be shuting up in a week or two

a few other wreckers has already come in and got their dirty hands on some stuff at dirt cheap prices

hey GZILLA who is the guy u talking about with the n/a supra? no one works there drives a supra

Inline 6 Grand Master

Inline 6

Posted
Posted (edited)
sale is on now

he'll be shuting up in a week or two

a few other wreckers has already come in and got their dirty hands on some stuff at dirt cheap prices

hey GZILLA who is the guy u talking about with the n/a supra? no one works there drives a supra

dirty hands seen a wreckor with clean 1s? they musnt do any work if they did have em :woot:

maybe he was a customer i dont know he followed me around the shop for a bit in the back and i thought you cant get supra stuff there so i jus assumed he worked there. dosnt matter ill just demonstrate later whats quicker if i see him around.

Edited by gzilla
thanglongz Rising Star

thanglongz

Posted
Posted

Sad to see Z imports go, always looked after me with extremely special prices, unlike the rest of them, stupidly ridiculous prices...Rest assured people, after speaking with him he isn't really gone, just moving into newer imports down grand junction

Inline 6 Grand Master

Inline 6

Posted
Posted (edited)
was it a black n/a aero top? wally did import one for a young kid

reason im asking is that im down there sometimes and i drive the girlfriends supra which is blue

yea that was prob the 1 black n paul walker roof edition, maybe he jus got it and was abit excited. hell i prob come accross to some people the same way when i talk about my car :D i try not to but prob happens sometimes. its all good sled stuff like that neva bothers me. i luv it when someone talks my car down its quite funny when they get proven wrong and start telling excuses afta. makes it more interesting than yeah i know ull beat me but ill try anyway.

Edited by gzilla
Damo_R34 Grand Master

Damo_R34

Posted
Posted

Ohh man so shit! My old man knows Wally pretty well, was going to import me a 33 when he was in Japan. Ill be heading down tomorrow to see what bargains i can pick up.

Such a shame.

RIP Z imports.

Madaz Grand Master

Madaz

Posted
Posted

Good to Hear keep us posted :D

Sad to see Z imports go, always looked after me with extremely special prices, unlike the rest of them, stupidly ridiculous prices...Rest assured people, after speaking with him he isn't really gone, just moving into newer imports down grand junction
Ryanrb25 Grand Master

Ryanrb25

Posted
Posted (edited)

went there today, scored a HKS FULL 3.75 inch exhaust system with super drager on the rear also some interior parts n stuff i really needed. i was so spewing the 20valve that was sitting there went for 900 just before i got there....would have bought it then and there!! someone bought a 33 front cut with 10,000km on it!!!!!!!!!!! legit aswell. in amazing condition, apparently its going into a 31.

Edited by Ryanrb25
Cubes Grand Master

Cubes

Posted
Posted
i rekon Z imports and Japanese Import Spares @ windsor gardens are the best places in town.

both places very helpful.

I've found since Tim left prices have jumped up a tad with the new dude.

Tim was a top bloke always did good deals etc..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB20 in need of modest love injection

      By GTSBoy · Posted

      As you're looking at using a Link ECU, then large injectors are not a problem. But there's not really any need to go 1000s on an RB20 unless you're planning >>600HP on E85, which would seem unlikely. There are other options for injectors. The Xspurt ones are available from a number of places and you can get them in the mid 600s and 725cc, which is probably a sensible place to be. These are all EV14 based. If you are not using the stock AFM (at all, which would be the case with a Link) then a large turbo intake pipe to suit the ATR turbos is not an obstacle, so you should use one instead of a highflow. Results will be better.
    • QB6SAGR
      RB20 in need of modest love injection

      By QB6SAGR · Posted

      Hey guys,  I'm after some advice and this here is the best place to get it imo. I was a member a looong time ago under another account, with a lost email address. Its nice to jump back on and see some of the same names still giving good advice.  I mothballed my car when i moved to perth in 2013, and after getting towed across the nullabor a few times it has officially done more km's on a trailer than under its own power. Now that i have started the process of tidying up and modifying it, i see the fruit available (and the fruiterers selling the produce) is different than back in the day. hence my questions, as i used to 'know' what to get and now, i'm not so sure. Engine wise the car (92 gtst) has a walbro 255, k+n, fmic, cam gears and and turbo back 3"exhaust. Wish list is a Hypergear high flow or ATR43G1, Link G4x and some newer injectors before a tune up. My goals are modest, only low 200's power wise. i know i could achieve this with less, but i've been swapping out old for new where i can. Every cooling hose has been replaced, along with mani gaskets, WP, thermostat and radiator, fuel pump and timing belt, tensioner and idler, and i rebuilt the steering rack. Regarding the injectors, the fruiterers all seem to sell what used to be considered quite large injectors. There are a lot of options for bosch 1000cc EV14's, and i would like to know if that is a suitable choice for my build. Is modern injector design good enough to run these at the low duty cycles that i likely would be? is there a downside to running a too large injector these days? or, would there be an upside to running a smaller injector at higher duty cycle? I can see that there are smaller injectors still available, but the ones i have seen specifically marketed for RB's are pretty large (see: https://golebysparts.au/collections/fuel-rail-injector-kits/products/nissan-rb20-fuel-rail-bosch-980cc-1150cc-injectors-turbosmart-fpr800-regulator-kit), and i dont know enough about them to say one not marketed for RB's would fit or not. I have searched the forums, and amongst all the posts on older tech, I did see gtsboy recommend EV14's, but no size was mentioned... again, i'm not clear on if the smaller size bosch injectors are also EV14's as they do look similar.  also, if someone can recommend a tuner familiar with RB's in the Geelong or West Melbourne area i'd appreciate it. Thanks in advance guys. Cheers, Rowdy  
    • Duncan
      R33 GTR lift points for hoist

      By Duncan · Posted

      FWIW the depth of the groove in the rubber pad is not super essential, the blocks are rubber and squish a bit. If you are worried an angle grinder will make a deeper groove quick smart
    • GTSBoy
      R33 GTR lift points for hoist

      By GTSBoy · Posted

      I mean, if you were to move the jacking points away from the original location, that is, away from the wheels and closer to the centreline of the car, then it will be more likely to overbalance and tip off the supports. Same as we talked about before. I was talking about moving for-aft. If the sill is bent outward or inward, then the car would obviously look unstraight from the outside. Hopefully that hasn't happened either. Again, you can do comparative measurements from the chassis rails to see if there is much deflection.
    • sunsetR33
      R33 GTR lift points for hoist

      By sunsetR33 · Posted

      Can you elaborate what you mean with your first sentence? I meant move as in the bulge kinda seemed like it got pulled "outward" meaning it got pulled down and to the side with the jacking rail itself, so the load bearing bulge now sits lower than usual and is not level with the sill on the other side of the jack point. Either that or the jacking rail just got pushed in a good bit.
×
×
  • Create New...