Jump to content
SAU Community

Recommended Posts

i shoulda explained, i have a rb25 with a rb26 harnes, and i am using 740cc rb25 injectors lol thats why, i would trade them for rb26 inj, but if there is no resistor box wont circuit be open

Don't you also have the GTR plenum?

For the cost of high CC side feed injectors it would be cheaper to get a custom fuel rail and the cheaper top feeds.

EDIT!! i have just seen that you already have the side feeds.

The RD25DET injectors are High Impedance

& The GTR injectors are Low Impedance

But i think you already knew this

Edited by D_stirls
Don't you also have the GTR plenum?

For the cost of high CC side feed injectors it would be cheaper to get a custom fuel rail and the cheaper top feeds.

EDIT!! i have just seen that you already have the side feeds.

The RD25DET injectors are High Impedance

& The GTR injectors are Low Impedance

But i think you already knew this

i got a custom plenum, the resistor box if what changes the low impedence to high impedence some peopel said just dont run the resistor box but i think that will leave the circuit open

i got a custom plenum, the resistor box if what changes the low impedence to high impedence some peopel said just dont run the resistor box but i think that will leave the circuit open

anything, i dont wanna have to buy a new fuel rail, and sell my injectors and get rb26 inejctors and a resistor box ( hard to find)

To bypass the resistor box, you simply connect all the pins together, so the injectors get 13.8v. Pretty sure plugs are different too. What are you planning on doing about the VCT?

msd rpm activated switch i got pics

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Interesting, I haven't read about the issue with oil getting into the speedo in the cluster before. I'll have to take more notice with mine. The speedo on my R32's when I've run factory diff and tyre size have never been accurate as far as I can remember. The non Type-M GTS-t did come with 15" 5 stud wheels and smaller brakes, but that's less than 5% of them.
    • Good to hear the condenser you picked up off my brother worked all good. Do you think there could be an issue with your AC compressor itself or the clutch on it then? I don't know a lot about them so I can't really help but keen to hear what it ends up being. Keep the build thread going man, it's nice to look back on over time.
    • This is a story of my life things, I learned eventually (thanks to someone calling me out) that my enthusiasm for discussing and sharing ideas that it came across as arrogance and I'm like... WTF?!    One thing I'm pretty sure I justifiably pride myself on is knowing that everyone will have things they can teach you, and you're always going to find out that something you think you know turns out wrong - you just don't know what it is until you get there.   Just the bursting enthusiasm that comes with ADHD when you hit something that gives you dopamine dumps can come across like you think everyone else is wrong or don't matter. But yeah, I'm a software engineer by trade and also do tuning in weekends and 100% have long had a reputation for  quickly making connections when resolving problems or forming solutions that I've sometimes had to take people form a long walk from start to end to explain how I ended up where I did when it's seemed "too simple" when I've stated my initial case, and had the "WTF" type reaction when they've realised how much was actually considered haha.   My reward is that I get all the curly problems thrown at me.
    • Wives never seem to find things funny. Especially when they're trying to sleep, and you've found the new funniest thing ever. I've never seen someone be able to get try and be cranky with me, while they're holding back fits of laughter... 😛   Also, I tell mine it's payback anyway. She has BiPolar. So the household can get quite emotionally wild at times 😛
    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
×
×
  • Create New...