Jump to content
SAU Community

Recommended Posts

My 19's were originally a pearl silver colour, but would always look white in photos.

When i painted the car, i powder-coated the rims to "precious steel pearl". Didn't need sandblasting as rims were still in unmarked condition. Payed $120 for all four 19" rims

Before:

post-1811-1207568013_thumb.jpg post-1811-1207568051_thumb.jpg

After:

post-1811-1207568244_thumb.jpg post-1811-1207568273_thumb.jpg

blasting is used to both clean off old coatings that may not survive the curing process as well as to etch the surface to improve the adhesion of the coat.

they look great Al, im suprised they didnt strip them first though.

blasting is used to both clean off old coatings that may not survive the curing process as well as to etch the surface to improve the adhesion of the coat.

they look great Al, im suprised they didnt strip them first though.

The surface was hand sanded before coating.

Coating has now lasted about 4.5yrs. In that time they have seen multiple track fun days, motokahnas, drags, spirited cruises, etc.; Yes on a couple of occasions i cnbf swapping rims so i done a couple of track fun days with the 19's :D. The coating has not cracked or bubbled, so they have withstood all the punishment.

I have seen other rims powder-coated and some have flaked off, etc. This would be due to poor workmanship and preperation.

I only had to re-coat one rim as i got a little too close to my garage center brick pillar :blink:

The surface was hand sanded before coating.

Coating has now lasted about 4.5yrs. In that time they have seen multiple track fun days, motokahnas, drags, spirited cruises, etc.; Yes on a couple of occasions i cnbf swapping rims so i done a couple of track fun days with the 19's :D. The coating has not cracked or bubbled, so they have withstood all the punishment.

I have seen other rims powder-coated and some have flaked off, etc. This would be due to poor workmanship and preperation.

I only had to re-coat one rim as i got a little too close to my garage center brick pillar :blink:

they do look sweet

hand sanding is fine if the coating will stand up to the temps for the cure. cant wait to get my new oven setup so i can start doing some rims

where they clear coated aswell?

they do look sweet

hand sanding is fine if the coating will stand up to the temps for the cure. cant wait to get my new oven setup so i can start doing some rims

where they clear coated aswell?

My 19's were not clear coated as i wanted the satin finish.

My 17" track rims are clear coated as i wanted to see the difference between satin and gloss.

The gloss makes the "pearl" in the powder coat shine more, but the satin finish is smoother as it obviously has less layers.

post-1811-1207654569_thumb.jpg

My 19's were not clear coated as i wanted the satin finish.

My 17" track rims are clear coated as i wanted to see the difference between satin and gloss.

The gloss makes the "pearl" in the powder coat shine more, but the satin finish is smoother as it obviously has less layers.

dont knwo what you mean by smoother with less layers - you can get satin clears too

got any close ups of the colour?

  • 2 months later...

Can anyone recommend a specialist in Sydney or better still Western Sydney that can do good sanding + powder coating?

And would 'black' powder coat look good on OEM R34 wheels on a R34 GTR that's already pearl black?

And lastly would you paint the wheels satin or gloss? I get the feeling that satin would highlight the car more (- whereas gloss would pull attention away from the car).

Any opinions?

Cheers

Can anyone recommend a specialist in Sydney or better still Western Sydney that can do good sanding + powder coating?

And would 'black' powder coat look good on OEM R34 wheels on a R34 GTR that's already pearl black?

And lastly would you paint the wheels satin or gloss? I get the feeling that satin would highlight the car more (- whereas gloss would pull attention away from the car).

Any opinions?

Cheers

Check out Twoogle - r32 GTR with r34 GTR rims in black for how the rims will look. - in latest HPI mag

im hoping to have my new setup done in about a month then i'll be able to help you out with coating the rims :whistling: im near Richmond so not too far from you aswell.

dont knwo what you mean by smoother with less layers - you can get satin clears too

got any close ups of the colour?

Sorry for the late reply Chris, never received notification of your reply in this thread.

In my experience the clear coat, added on top of the colour powder coat, has more of an orange peel finish.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've owned a few scooters over the years, a Vespa PX oil burner was my first scooter, followed by a few others, including a little 50cc BeeWee that I used as a barracks bike, and I've had a blast on all of them, they really are the cheapest for of city/suburb transport around The only issue with scooters in Australia is lots of people look down on them due to their size,  maybe they need a big bike to make up for something else where they are lacking, unlike Europe and Asia where every man an their dog owns one, and now that filtering is legal in NSW, local traffic is never a issue Not to say I haven't owned my share of big cc bikes over the years, but they were for more blasting through the hills or Hwy riding where it needed to sit on Hwy speeds Safety wise, I ride like everyone is always trying to kill me, everyone is running a red, or running stop/give way signs, or generally asleep at the wheel, which most people are duringtheir commute, I also ride really safe, and give myself, and everyone else enough room in case I need to pull some hasty evasive actions, I've done a few rider training days over the years, which has come in handy on more than a few occasions  As for mods, there's nothing really, and yes your right about aftermarket exhaust, all you get is loud and obnoxious noises from them, like every 250-300 cc you hear with a aftermarket muffler, in saying this I did put a rear muffler from a 125 Aprilla on one of my old 125 scooters, it was horrendous and no amount of full face helmet and ear plugs would dampen that noise As for coming from the Harley, and what a overpriced POS that was, I no longer do big rides as my poor old busted joints ache after about 1/2 an hour of riding, long cruises are so much more enjoyable now in a car, so a big bike would be pointless   
    • Oh wow, it's easy to forget how cheap these can be. Probably the cheapest way to travel. Though people in cars here tend to be morons and I would not feel very safe. Were scooters ever big in Australia? It used to be the thing growing up in Europe ~20 years ago. 50/70/125ccm Peugeot or Yamaha and some others. Utterly obnoxious Polini race exhausts. Kick stands that slant as much as possible. So loud. So much noise for really not moving very fast at all. But it felt cool at the time. Not sure where I'm going with this, but there is an aftermarket for mopeds! Though I'd have pictured you more for a Goldwing kind of guy after growing out of the Harley.
    • You need to know I am sorry for this.  
    • As the MX5 isn't apparently "manly" enough, and I need something for runs to the local shops, and also take to my part time job at the salon, basically I can keep the MX5 away from car parks and stuff......like "flying lockers", I was wondering what I could buy to fix this issue LOL, I pick up a new Yamaha 125 Delight this arvo from Trooper Lu, basically a R1 that you can fit a slab of beer on between your feet, also, it was $29400 cheaper than a R1, so actually it's 2 x better than a R1    
    • Nah. H2S. H2S is "rotten egg gas", which is what is associated with no cat. SO2 is equally nasty, and if you've ever smelt it you'll know all about it. More of a choking, acid in the back of the throat sort of thing. But you can only smell it in a narrow range up to about 1ppm. Above that, it irritates your mucous membranes, but you don't smell it.
×
×
  • Create New...