Jump to content
SAU Community

Best & Reliable Mechanics For Engine Rebuild In Nsw

10MinuteCar

By 10MinuteCar,
in New South Wales

 Share

Recommended Posts

10MinuteCar Collaborator

10MinuteCar

Posted
Posted

hi i need to know the best place in Sydney to take my car in for engine rebuild as i may need to change piston rings. i need mechanics who won't overcharge me and do the job like they have done before efficiently and perfectly.

Pezhead Grand Master

Pezhead

Posted
Posted

There are plenty of good shops around, but why do you think you only need to change the rings? If your motor is tired then you will at least need to do the pistons and rings together. They will need to hone the bores if you are lucky (not too worn or scored) or bore them out if they need to be cleaned more than a hone.

While you are doing all this you might as well change the oil pump, have the rods cleaned and inspected (maybe shot peened), etc. Since the head has to come off to do this, you might as well do it too. Do a valve grind and possibly replace the valve guides or at least the seals.

The objective of a rebuild is generally to return/enhance the core strength and tolerances of a motor and that takes a lot more than just replacing a few items.

I doubt you'd find a reputable shop that'd only do the rings.

(my 2 cents)

10MinuteCar Collaborator

10MinuteCar

Posted
  • Author
Posted

thanks alot with the help! yeah im thinking doing exactly wat u said "pezhead" but yer i need a workshop who knows wat they're doing like wat other things to look for potential damage. How much do you think it'll cost to do all what you said?

10MinuteCar Collaborator

10MinuteCar

Posted
  • Author
Posted

BTW nobody recommends shops such as belgarage, CRD and etc? are the just good in performance mods and not rebuilding an engine? who are the reputable engine builders? i'd appreciate it very much.

TommO Grand Master

TommO

Posted
Posted
BTW nobody recommends shops such as belgarage, CRD and etc? are the just good in performance mods and not rebuilding an engine? who are the reputable engine builders? i'd appreciate it very much.

They're good but you pay a lot for their experience.

TommO Grand Master

TommO

Posted
Posted (edited)

A mate just got his engine (SR20) built from http://www.stmarysengines.com.au/, they did the head work / machining / fitting etc, and my mate providing the parts (cams / pistons / rods / timing gear)... They seem to be very good so far, and we'd heard nothing but good things.

Other than that, almost EVERY workshop send your block/heads to specalists for machining etc..

Edited by TommO
JDSracing Community Regular

JDSracing

Posted
Posted
yep but they also send the heads away for machining and such. i guess there are just no workshops who acutally do the head work themselves.

Leon's Engineering in Artarmon,

Does full engine building and head work themselves (well, when I last used them a bit over 4 years ago now).

10MinuteCar Collaborator

10MinuteCar

Posted
  • Author
Posted

yep i called up proengines, they seem to be very promising and really knows their stuff. but the price is still around the 6k mark just to freshen up the engine back to normal leaving it as stock internals. im guessing its the parts which bring the price up like this.

FATAZZ Grand Master

FATAZZ

Posted
Posted
Has anyone heard of Insight Motorsport (i think that's what it's called). A workshop recommended them to me for a tune.

Any thoughts?

They put a GT35 or 40R turbo on this dude's(friend of friend) 2.7L hillux.

tuned with all supporting mods,i went and spoke to the bloke at Insight.He seems nice.

Their just off Holbeche. not much but hope it helps.

From memory they looked to have a few evo rally cars they were working on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      NC MX5

      By MBS206 · Posted

      There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • GTSBoy
      AC not coming from top vents

      By GTSBoy · Posted

      What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
    • dbm7
      Shifting questions

      By dbm7 · Posted

      ...oops. forgot the TCU end...
    • Sleepergm
      Custom titanium intake

      By Sleepergm · Posted

      No I got mine from a friend that had fabricated one … but I had to fit it to my setup which was a hks turbo setup. His was a Garrett -7. So one of my turbos was not a flange for one side … then I had a leak in the welds I had to find a weld shut … in the end the setup was decent priced but I spent a lot to get it fitted. A couple companies I checked would make it but you’re talking 7-9k aud with titanium. No joke mine was 6-7k even second hand after I had to fit it in Hong Kong … labour is expensive here. 
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I'd just like to restate that I don't think anyone here is actually hating I recently sold a car part to a guy who was building a forged auto R34, with MV stall and aiming at ~450kw. I told him that I'm him, from the future and to stop after it explodes once. I told him I knew he won't listen the first time, and that's fine. But if my predictions do come true - Change direction faster than I did. I also said it's probably no coincidence that the dyno plot of a reliable turbo engine starts to look a lot like a N/A motor. :p
×
×
  • Create New...