Jump to content
SAU Community

R33 Rotors, Boost Controller, 12mm Bolt On Wheel Spacers, Seats, Z32 Afm Plugs, Actuator

nigelswazi
 Share

Recommended Posts

nigelswazi Mentor

nigelswazi

Posted
Posted (edited)

Selling the following items to clear out garage:

----------------------------------------------------------------------------------------------------------

item: A complete set of Bilstein Shocks + Eibach lowered/stiffer springs to suit R33 GTS-t Series 1 or 2. Used for the last 8 months with just normal street/hills use for which they are absolutely perfect. Excellent spring rate which gives fantastic handling and a significant reduction in body roll whilst being perfectly comfortable for street use.

Price: $700 Now SOLD

Pics soon!

----------------------------------------------------------------------------------------------------------

Item: Pair of R33 Front Rotors in excellent condition heaps of meat left as shown in pic with only a little even wear since new. Measured thickness which is at 29.1 and 29.2mm so not even half worn. Fits R33 Caliper equiped vehicles

Price: $80 pair Now $60 pair

frontrotorsvc6.th.jpg

----------------------------------------------------------------------------------------------------------

Item: Pair of Jap 12mm thick bolt on wheel spacers complete with studs and bolts, that bolt onto 4x114.3 hubs and allow you to fit 4x100 wheels. Was used on my S13 to space my wheels 12mm as I had 4stud wheels that had both 4x114.3 & 4x100 stud patterns so was the perfect solution. Can also be used as a 12mm spacer for either stud pattern if you had longer wheel studs.

Price: $100 $80 pair

wheelspacerscloseupar5.th.jpg

wheelspacersgr1.th.jpg

----------------------------------------------------------------------------------------------------------

Boost Controller - electronically activated boost controller valve allowing you to run stock boost and then at the flick of a switch run the boost level you set on the valve. Needs a switch as the one I used for this is still mounted on my console and too difficult too remove again :thumbsup:

Price: $60 $35

boostcontrolleryo4.th.jpg

----------------------------------------------------------------------------------------------------------

Z32 AFM Plugs + ~30cm of loom ready to splice or wire into your loom to run Z32 AFM. Come complete with instructions on wiring into SR, CA & RB Powered Vehicles

Price - $30 Delivered or $20 pickup

----------------------------------------------------------------------------------------------------------

Pair of R33 Front Seats in excellent condition. The drivers seat has a small tear in bolster nothing major. This is the comfy plush velour type model with the adjustable side bolster wings for more support through corners etc.

Price - $150

----------------------------------------------------------------------------------------------------------

R33 Internal Heater Fan assembly includes fan itself along with the air intake & recirculation electrics etc in excellent condition.All is as shown in pic perfect if your fans packed it in so it no longer blows air in your car. In excellent condition little dusty just give it a quick wipe before fitting.

Price - $30

internalheaterfansepex3.th.jpg

internalheaterfansl1.th.jpg

----------------------------------------------------------------------------------------------------------

R33 Stock Actuator in excellent condition to suit R32/R33 turbos

Price - $25 $20

acutatorjq2.th.jpg

----------------------------------------------------------------------------------------------------------

Aftermarket Swaybars

S14 Front 27mm hollow swaybar, same thickness as whiteline HD but a hell of a lot lighter, painted black complete with D bushes, saddles and end links. Hollow bars are generally how the japs make their aftermarket swaybars as they perform the same as solid but save weight which also increases handling. Unsure if it fits S13/S15 Price - $100ono

Stock Sway Bars - $25 each

R33 Front Stock complete with D bushes and saddles but no endlinks

R33 Rear Stock complete with D bushes but no saddles or endlinks

S13 Rear Stock complete with D bushes but no saddles or endlinks

---------------------------------------------------------------------------------------------------------

Freebies

Pair R33 Front Castor Rod Chassis Mounts

Pair S13 Rear 4 Stud Hubs

Location:

Adelaide but will post some items at your expense

Contact:

SMS 0404998591 or PM prefer SMS

Edited by nigelswazi
nigelswazi Mentor

nigelswazi

Posted
  • Author
Posted (edited)
Do you also have a pic of how low the car sat with the Bilstien / eibachs?

I have one on my computer at work will post one when I get there.

CAn you give a vernier measurement on the thickness of the rotors?

As soon as I find my vernier but they are a old school set not digital will see if I can borrow or take to ABS or somewhere to get measured. Heaps of meat tho

Edited by nigelswazi
nigelswazi Mentor

nigelswazi

Posted
  • Author
Posted (edited)
got a pic of the front seats?

Cheers

Jo

Hi Jo will get a pic for you asap

Is the suspension height or damper adjustable?

Suspension is not height adjustable but you can always get the shocks modded to runs circlip height adjustability if required. Shocks don't really need adjustment as they give a excellent ride quality from both handling and comfort perspective these are basically the same as the SK group buy setup for a fraction of cost.

--------------------------------------------------------------------------------------------------------------------------------------------------

Rotors are 29.1 and 29.2mm thick using my vernier calipers so they are not even half worn yet. Minimum legal thickness is 28mm

FINAL PRICE DROP CRAZY CHEAP PRICES

Edited by nigelswazi
nigelswazi Mentor

nigelswazi

Posted
  • Author
Posted (edited)

Post Updated

R33 Rotors Backup for Sale

Coilpack Cover SOLD

Pioneer Stereo Package Now SOLD

Special Weekend Prices!

Edited by nigelswazi
mid life crisis Veteran

mid life crisis

Posted
Posted

do you have the little black box actuactor with the white arm on from the heater assembly it opens the bottom flap for the heaters ?

cheers dean

nigelswazi Mentor

nigelswazi

Posted
  • Author
Posted
do you have the little black box actuactor with the white arm on from the heater assembly it opens the bottom flap for the heaters ?

cheers dean

Certainly does has the box complete with the white arm still assembled

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      ugently need expert / experienced opinion

      By GTSBoy 路 Posted

      There's more than one way to skin that cat, and most of the sump Maatouks have done will be GTR sumps. They are HUGE in GTR drag racing here.
    • dbm7
      Shifting questions

      By dbm7 路 Posted

      Yeah...I always start at the shift solenoids, because there's only a few reasons these will spook into limp mode, and bad shift solenoids is one ~ the other can be the shift control module (if you have steering wheel shift buttons)...it's easier to eliminate the solenoids first.
    • cabramatta
      Never ending fuel pump drama

      By cabramatta 路 Posted

      Might piggy back off this thread since there's been a good discussion about PWM.   I purchased a Walbro 460 F90000267 and have been looking into PWM to understand it. It was purchased more of a future proof as my original OEM fuel pump died (r33 below 200kw) and figured I'd just upgrade it to this. That's when it hit me that a pump this big can cause more dramas with such high amperage draw and heating of the fuel pump being on 100% all the time in such a mild setup.   I have a Nexus R3 and slowly collecting power mods but I was looking into the PWM feature on the NSP software:   Then looking at the graph from the fuel pump:     Am I safe to assume reducing duty cycle to 50% for example would make the pump run like a 230/lph ? Where does the PWM come in all of this ?   I've gone down the rabbit hole of PWM fuel pumps and it seems there are many differing opinions on how to go about it 馃槄  
    • DRoc81
      Shifting questions

      By DRoc81 路 Posted

      Thank you, this will keep me busy for a bit.  I will update progression.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 路 Posted

      That specific one would be an exchange part, meaning I'd have to send mine to them. Plus it looks like a non AWD sump, which won't work for me. There is one or two shops in my country that I can ask to do a sump extension job and it'd most likely end up being cheaper than sending mine to AUS or NZ and getting one back, and quicker too.
脳
脳
  • Create New...