Jump to content
SAU Community

Recommended Posts

Selling the following items to clear out garage:

----------------------------------------------------------------------------------------------------------

item: A complete set of Bilstein Shocks + Eibach lowered/stiffer springs to suit R33 GTS-t Series 1 or 2. Used for the last 8 months with just normal street/hills use for which they are absolutely perfect. Excellent spring rate which gives fantastic handling and a significant reduction in body roll whilst being perfectly comfortable for street use.

Price: $700 Now SOLD

Pics soon!

----------------------------------------------------------------------------------------------------------

Item: Pair of R33 Front Rotors in excellent condition heaps of meat left as shown in pic with only a little even wear since new. Measured thickness which is at 29.1 and 29.2mm so not even half worn. Fits R33 Caliper equiped vehicles

Price: $80 pair Now $60 pair

frontrotorsvc6.th.jpg

----------------------------------------------------------------------------------------------------------

Item: Pair of Jap 12mm thick bolt on wheel spacers complete with studs and bolts, that bolt onto 4x114.3 hubs and allow you to fit 4x100 wheels. Was used on my S13 to space my wheels 12mm as I had 4stud wheels that had both 4x114.3 & 4x100 stud patterns so was the perfect solution. Can also be used as a 12mm spacer for either stud pattern if you had longer wheel studs.

Price: $100 $80 pair

wheelspacerscloseupar5.th.jpg

wheelspacersgr1.th.jpg

----------------------------------------------------------------------------------------------------------

Boost Controller - electronically activated boost controller valve allowing you to run stock boost and then at the flick of a switch run the boost level you set on the valve. Needs a switch as the one I used for this is still mounted on my console and too difficult too remove again :thumbsup:

Price: $60 $35

boostcontrolleryo4.th.jpg

----------------------------------------------------------------------------------------------------------

Z32 AFM Plugs + ~30cm of loom ready to splice or wire into your loom to run Z32 AFM. Come complete with instructions on wiring into SR, CA & RB Powered Vehicles

Price - $30 Delivered or $20 pickup

----------------------------------------------------------------------------------------------------------

Pair of R33 Front Seats in excellent condition. The drivers seat has a small tear in bolster nothing major. This is the comfy plush velour type model with the adjustable side bolster wings for more support through corners etc.

Price - $150

----------------------------------------------------------------------------------------------------------

R33 Internal Heater Fan assembly includes fan itself along with the air intake & recirculation electrics etc in excellent condition.All is as shown in pic perfect if your fans packed it in so it no longer blows air in your car. In excellent condition little dusty just give it a quick wipe before fitting.

Price - $30

internalheaterfansepex3.th.jpg

internalheaterfansl1.th.jpg

----------------------------------------------------------------------------------------------------------

R33 Stock Actuator in excellent condition to suit R32/R33 turbos

Price - $25 $20

acutatorjq2.th.jpg

----------------------------------------------------------------------------------------------------------

Aftermarket Swaybars

S14 Front 27mm hollow swaybar, same thickness as whiteline HD but a hell of a lot lighter, painted black complete with D bushes, saddles and end links. Hollow bars are generally how the japs make their aftermarket swaybars as they perform the same as solid but save weight which also increases handling. Unsure if it fits S13/S15 Price - $100ono

Stock Sway Bars - $25 each

R33 Front Stock complete with D bushes and saddles but no endlinks

R33 Rear Stock complete with D bushes but no saddles or endlinks

S13 Rear Stock complete with D bushes but no saddles or endlinks

---------------------------------------------------------------------------------------------------------

Freebies

Pair R33 Front Castor Rod Chassis Mounts

Pair S13 Rear 4 Stud Hubs

Location:

Adelaide but will post some items at your expense

Contact:

SMS 0404998591 or PM prefer SMS

Edited by nigelswazi
Do you also have a pic of how low the car sat with the Bilstien / eibachs?

I have one on my computer at work will post one when I get there.

CAn you give a vernier measurement on the thickness of the rotors?

As soon as I find my vernier but they are a old school set not digital will see if I can borrow or take to ABS or somewhere to get measured. Heaps of meat tho

Edited by nigelswazi
got a pic of the front seats?

Cheers

Jo

Hi Jo will get a pic for you asap

Is the suspension height or damper adjustable?

Suspension is not height adjustable but you can always get the shocks modded to runs circlip height adjustability if required. Shocks don't really need adjustment as they give a excellent ride quality from both handling and comfort perspective these are basically the same as the SK group buy setup for a fraction of cost.

--------------------------------------------------------------------------------------------------------------------------------------------------

Rotors are 29.1 and 29.2mm thick using my vernier calipers so they are not even half worn yet. Minimum legal thickness is 28mm

FINAL PRICE DROP CRAZY CHEAP PRICES

Edited by nigelswazi

Post Updated

R33 Rotors Backup for Sale

Coilpack Cover SOLD

Pioneer Stereo Package Now SOLD

Special Weekend Prices!

Edited by nigelswazi

do you have the little black box actuactor with the white arm on from the heater assembly it opens the bottom flap for the heaters ?

cheers dean

do you have the little black box actuactor with the white arm on from the heater assembly it opens the bottom flap for the heaters ?

cheers dean

Certainly does has the box complete with the white arm still assembled

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...