Jump to content
SAU Community

Name This Turbo

dave_1

By dave_1,
in Engines & Forced Induction

 Share

Recommended Posts

WAN73D Collaborator

WAN73D

Posted
Posted

from my knowledge 45V something written on the compressor housing indicates it's an r33 or stagea turbo (same), as 16V something indicates it's an r32 turbo. as for the other number i dont think they're all that consistent...but i could be wrong

main way to tell is if you have a metal compressor wheel (makes a 'ting' when tapped) then its a series one r33, if its nylin then its a series 2.

As for r34's i think they're also nylon....not sure.

Link to comment
https://www.sau.com.au/forums/topic/213614-name-this-turbo/#findComment-3772970
Share on other sites
  • 5 months later...
bumble_bee Rising Star

bumble_bee

Posted
Posted

but its got twin blade fins on the wheel..

i believe its a series2 turbo

hence it saying 45V4..

series 1 are usually 45V1 and 45V2

the only thing im unsure about is that..

i was lead to believe that the 45V4 had.. "twin blade/fin NYLON wheel"

but im unsure on that,,

ca someone please correct me or say if im rit???

thanks

Link to comment
https://www.sau.com.au/forums/topic/213614-name-this-turbo/#findComment-4134575
Share on other sites
JET-25L Proficient

JET-25L

Posted
Posted

hmm nah i think u'l find it's a nylon one dude. I'll put a pic of my blown series 2 turbo with single blades if you like. I bet you'll find it's the same.. If it's definitely been there forever then it's not going to be a steel one:) The steel ones are twin blade anyway.

45v3 means jack squat except which casting it came out of nothing to do with type of wheel/model of car.

Link to comment
https://www.sau.com.au/forums/topic/213614-name-this-turbo/#findComment-4137313
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      Looking at finally painting and installing my R32 GTR wing I bought back in 2018. I got two quotes: Quote 1: $880 includes: wing, spare boot, holes welded up prep/paint. Pro: full boot with wing AND hole-less boot with lip i can swap between Con: $$  Quote 2: $330 wing only. Pro: cheaper Con: lose my (relatively) rare no holes sedan boot Also to consider I do plan on painting my whole car at some point "soon" (been saying that since 2018) Anyway Enjoy these All Japan Day 2025 pictures of my 4 door, still rocking the Calsonic Livery! Rolling in Interior shot Matching Peer Pressure Racing overalls are pretty cute ngl. This year was a hard 1990 cut so I got to be over with all the older cool stuff Next to arguably the best car there. A mighty S-Cargo
    • Dose Pipe Sutututu
      Rb head oil drain dimensions

      By Dose Pipe Sutututu · Posted

      I personally would run 2x from the cam covers into the catch can, 1x sump vent to catch can (would mount this at a low point of the catch can, so it can also act as a drain). I would see if you can run a -12AN down there to improve venting and also draining. The head drain thing, just drain that back to the sump on the other side. Catch can to be vented, unless you plumb or back to the intake.
    • Dose Pipe Sutututu
      Rb head oil drain dimensions

      By Dose Pipe Sutututu · Posted

      Yeah the head "drain" is rather a sump/crank case vent. My catch can stopped filling up after venting the sump to the catch can. I have 4x fittings in mine, which is about 5Ls. 2x cam, 1x sump vent/catch can drain, 1x fitting back to the intake and a massive breather which can be blocked so it's a fully sealed system.
    • Zabuza
      Need AC Compressor for R32

      By Zabuza · Posted

      Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • sausagepianist
      V36 2008 Coupe Wiring Differences with Android Screen

      By sausagepianist · Posted

      Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
×
×
  • Create New...