Jump to content
SAU Community

Recommended Posts

Hi guys, I wanted to post this in the local dealers sticky, but there doesn't seem to be any advice/recommendations on any dealers in there, just an argument. :yes:

I am looking to buy a GTR from GTA (Gran Turismo Autos) on Spencer St. Just wondering if anyone on the forum has ever bought from them or dealt with them before.

Also, I would like to get a mechanical inspection/compression test before I buy the car. Is Racepace the best place to do that, as they specialise in GTRs? Bayswater is 40 mins from the CBD, so I don't think the dealer would be keen for me to bring it out that far.

I was thinking of using Chasers, as they are just down the road in West Melbourne. I know some people's cars here are tuned by Chasers. Do they know enough about GTRs specifically? My impression was that they tune all jap performance cars, so may not be so experienced with one particular model.

I understand that R31Nismoid has said no public slandering of businesses is to occur, but recommendations are fine. Therefore, please PM/email me if you have something potentially negative to say. Confidentiality is assured. :thumbsup:

Thanks very much. Any advice is great.

Link to comment
https://www.sau.com.au/forums/topic/213631-gta-chasers-racepace/
Share on other sites

Hi guys, I wanted to post this in the local dealers sticky, but there doesn't seem to be any advice/recommendations on any dealers in there, just an argument. :yes:

I am looking to buy a GTR from GTA (Gran Turismo Autos) on Spencer St. Just wondering if anyone on the forum has ever bought from them or dealt with them before.

Also, I would like to get a mechanical inspection/compression test before I buy the car. Is Racepace the best place to do that, as they specialise in GTRs? Bayswater is 40 mins from the CBD, so I don't think the dealer would be keen for me to bring it out that far.

I was thinking of using Chasers, as they are just down the road in West Melbourne. I know some people's cars here are tuned by Chasers. Do they know enough about GTRs specifically? My impression was that they tune all jap performance cars, so may not be so experienced with one particular model.

I understand that R31Nismoid has said no public slandering of businesses is to occur, but recommendations are fine. Therefore, please PM/email me if you have something potentially negative to say. Confidentiality is assured. :thumbsup:

Thanks very much. Any advice is great.

hey mate, i think Chasers would probably be an ideal place to get the GTR looked at. they have built/tuned a couple of gtr's with power outputs of 430kw at all four wheels, so in my opinion they do have a fair bit of knowledge on them. Your probably best of giving them a call and having a chat with them and seeing for yourself whether or not you'd be happy for them to look at the car. Anyways goodluck with it all, hope you get the car....let us know how it goes

IMO your buying a fairly hefty priced GTR so I would say they would allow you to get RacePace to check it all out, unless they had something to hide maybe?!?

I live in Deer Park(25mins west of CBD) and use RacePace myself(Not in ages though :thumbsup: ), I dont mind travelling for quality, especially tuning!!

Yeah, I will ask the dealer if he is happy with that.

If the mechanical inspection won't take too long maybe I can ask them to incorporate it into my test drive to Bayswater and back - 2 birds with one stone. :thumbsup:

Dude if your buying a $50k+ car (assuming your buying an R34GTR), you should be able to take it where ever you like to get it inspected, and if GTA are willing to sell decent cars it should not be a problem. If they don't want you to take your car to Racepace for an inspection then I'd be concerned. They shouldn't give you an option, be firm and take it wherever YOU want.

PM Jamezilla, he can tell you a thing or 2 about GTA....

Yeah, indeed you should be able to get it checked out no problem,they want the sale as much as you want the ride.

Please let us know how it goes.

Is the GTR R34 your looking at the Silver one near the front?

What is the asking price on it ...if you don't mind me asking.

As they say in the classics - if you can't say something nice, don't say anything at all.

BUT...

The issue with my experience was not the car, it was the dealer.

If you find a car that you like, and can get an independent review of it - then just make sure all REVS, VicRoads and Police checks are done correctly.

Get each party (be it the Police or VicRoads etc) to sign off on the report, and you'll be right.

Chasers are close and will look after you.

Ben will certainly do a good job if you want to build on the car too.

J

(just don't tell me it's the 1999 pewter R34, non-V - it's been there for a while...)

Nah it's not the silver one at the front. That's a R34 GTR V-Spec II Nur. The dealer wouldn't tell me how much he sold it for, but I would think a Nur's about $20k out of my price range :D

I think it's already been bought as well.

I'm getting some more work done to my car @ Chasers next week.

I can recommend Chasers to anyone who wants good work done to their import.

All the mechanical work on my car is done there, for me its a fair drive over there but its worth it.

Every time I have dealt with them I've had no trouble.

:rofl:

had my 32 GTST checked and fully serviced and its sounds bettter than befor from racepace benno is a top guy he is the one to talk to, they also swaped my suspension in like 40min ^^ they quick as well when u in a hurry:D

Cool, thanks.

Yeah they sounded decent over the phone. I probably will use them.

Anyone had any experience with GTA?

Im more than likely buying my GTS from them this year. i have found them to be the best so far.

everyone thinks theyre car is the "best" one in the country.. i bet theres about 400 better examples than ur car out there champ

LOL, i would say its the best R34 i have ever seen in the flesh, possibly the most desirable of all the R34s i have seen in print as well. Easily the top 5.

If you are selling it Aaron you should really consider the simple pleasure or ringing a rwd 2L's neck :)

make sure you get the body checked thoroughly by a good panel shop not a mechanical shop....too many people are worried about mechanical issues and forget about the body.....

Yeap he is exactly right it happen to me under the wide body kit i found my quarter pannels cut, but not its all fixed and got gtr quarters :D instead and must check it not only engine which i did,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • You're not wrong, but more than a few times I've heard of people running into issues where their injector characterization isn't quite right and that approach works for that specific configuration but once they switch over to a new set they discover a whole bunch of stuff wasn't set up correctly. It's slightly more annoying to reverse engineer the OEM MAF transfer function but you already have the sensor wired up to the factory harness so keeping it around for a few weeks more while you figure out the tune is easy enough. I've seen GM also use a combination of both MAF + MAP in their ECUs before, MAF is for steady state and a calculation of the cylinder VE to correct the base VE table, then in transients it uses that calculated VE + raw MAP to determine cylinder filling somehow.
    • I know this one’s the BB one. My tuner did make mention about the actuator. I am curious about the VCT as well
    • Might also needs a stronger actuator with the right preloading. With older 2019 built bush G3 units, BB upgrade or 21U housing down size makes a pretty decent gain in response as well. 
    • Hey lads  so im finally putting together my rb30 forged bottom end and ran into an issue. I measured my main bearing clearance with arp main studs torqued to 60 ft-lbs using ACL H series STD size bearings and standard, un-ground crank shaft journals and got an oil clearance reading of about 1.3 thou measuring straight up and down and about 2.8 thou measuring at a 45 degree angle (just above and below the parting line). My machine shop said they measured the main tunnel and it was all within spec (they didnt say the actual measurement) and to go with a standard size bearing, which i have done and the clearance is too tight, I'm guessing because of the extra clamping force from the arp studs distorting the main tunnel. I was wanting to run about 2.5 thou main bearing clearance.  My questions are: 1. could i just use the HX extra 1 thou clearance ACL bearings? that would fix my straight up and down clearance making it about 2.3 thou, but then would the side to side clearance be too big at around 3.8 thou? 2. what actually is the recommended main bearing clearance for measuring near the parting line / side to side. i know its supposed to be bigger as the bearing has some eccentricity built into it but how much more clearance should there be compared to the straight up and down measurement? at the moment there is about 1.5thou difference, is that acceptable or should it be less? 3. If i took the engine block + girdle back to the machine shop and got them to line bore the main tunnel (like i told them to do the first time, but they said it didnt need it) what bearing size would i buy? the STD size bearing shells already slide in fairly easily with no real resistance, some even falling out if i tip the girdle up-side-down. If im taking material out of the main tunnel would i need a bearing with extra material on the back side to make up for it? this is probably confusing af to read so if something doesn't make sense let me know and ill try explaining in a different way. My machine shop doesn't come back from christmas break until mid January, hence why i'm asking these questions here. TIA for any help or info 
    • I bought the model back in Japan in Feb. I realised I could never build it, looked around for people who could build it, turns out there's some very skilled people out there that will make copies of 1:1 cars or near enough. I'm not really a photo guy... but people were dragging me in a group chat for the choice of bumper as someone else saw the car before it was finished as they are also a customer of that shop. I took the photo in the above post because I was pretty confident that the lip would work wonders for it. Here's some more in-progress and almost-done pics. It gives a good enough idea as to what the rear looks like!   I have also booked in a track day at the end of January. Lets all hope that is nothing but pure fun and games. If it's not pure fun and games, well, I've already got half an engine spare in the cupboard 
×
×
  • Create New...