Jump to content
SAU Community

Recommended Posts

If you can run the 1.1mm gap without it missing then do it. The bigger gap the better. People only reduce the gap when they are running large boost or have old, weak coils that can't provide a strong enough spark

That's true, only reduce gap if you have to.

NGK BKR6EYA. = 0.8mm

I was running these on 10psi with stock ECU. No Problems.

Installed an SAFC 2 and my Tuner gapped them down to 0.7mm due to old Stock Coils. No Problems.

NGK BKR6EYA-11 = 1.1mm

I will go back up to 1.1mm soon as I just bought some Brand New Stock Coils.

This will be interesting...

That's what I thought.. I will try the 1.1mm gap an see how I go. It only has 140k on the engine so coils might be fine.

Is 1.1mm and 0.8mm the only 2 gaps I can run or should I try lower the gap in 0.1mm increments like as in if 1.1mm doesn't work maybe try 1mm then 0.9 then 0.8 or is that pointless? I'm new to the whole boost scene so excuse my lack of knowledge haha appreciate everyone's help :)

If they are the original coils at 140kms then they will probably be getting a bit weak.

And yes, you can just drop the gap by 0.1mm increments until it doesn't miss

If you want cheap BCPR6ES, get them off eBay

Just buy more than 12 at a time and it works out pretty sweet, $2.90 each delivered

http://www.ebay.com.au/itm/NGK-spark-plug-BCPR6-ES-plugs-BCPR6ES-tradeprice-2330-/330828510503?pt=AU_Car_Parts_Accessories&hash=item4d06ea7527

I just ordered 24 lol, works out to be $2.81 each.. :)

Well the 1.1mm gap works fine. Revs sooo much smoother now. Coils must be good :D Old plugs had a little miss before it revved. Doesnt miss at all during idle or rev. Have no driven it yet to test them under load but all seems fine. Thanks everyone for your help

  • 7 years later...

I've checked alot of places and I can't seem to find BCPR6ES spark plugs with 0.8mm gap I can only find 1.1mm and super cheap say (after rego checko) they are not a right fit for the rb25. After alot of searching and doing my head in I found BCPR6ES with a 0.9mm gap from justjap so that's what I went with... ?‍♂️ Stock rb25

 

3 minutes ago, Kiza said:

I've checked alot of places and I can't seem to find BCPR6ES spark plugs with 0.8mm gap I can only find 1.1mm and super cheap say (after rego checko) they are not a right fit for the rb25. After alot of searching and doing my head in I found BCPR6ES with a 0.9mm gap from justjap so that's what I went with... ?‍♂️ Stock rb25

 

Hmmm. You just set the gap to whatever you want with a very cheap tool.

10 hours ago, Kiza said:

I've checked alot of places and I can't seem to find BCPR6ES spark plugs with 0.8mm gap I can only find 1.1mm and super cheap say (after rego checko) they are not a right fit for the rb25. After alot of searching and doing my head in I found BCPR6ES with a 0.9mm gap from justjap so that's what I went with... ?‍♂️ Stock rb25

 

I use those plugs with 1.1 gap and have zero issues. Drop gap if your coils are shit, otherwise leave at 1.1

So why so hard finding info ? Gapping copper/nickel and platinum plugs is trivial. Iridiums are the only ones you've really got to be careful with. In NGK if it has no - prefix at the end it is like this-

# heat range.

Copper/nickel plugs, the bcpr#es is pregapped to 0.9mm / 36 thou, there is no 0.8mm gap in bcpr#es coppers.

Platinum plugs BCPR#EP and Iridium plugs BCPR#EIX, are pregapped to 0.8mm / 32 thou.

A -11 at the end indicates an 1.1mm / 44 thou gap as an option, available in all of these plugs.

15 hours ago, Kiza said:

I've checked alot of places and I can't seem to find BCPR6ES spark plugs with 0.8mm gap I can only find 1.1mm and super cheap say (after rego checko) they are not a right fit for the rb25. After alot of searching and doing my head in I found BCPR6ES with a 0.9mm gap from justjap so that's what I went with... ?‍♂️Stock rb25

 

Also 5 is stock NGK heat range for RB25, 6 for RB26.

Probably why Repco / Supercrap say it's the wrong plug too.

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, the latter. No diff should have a centre replaced without checking clearances because its unlikely to be the same as whatever came out. Not that that stops most people just checking a new centre in
    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
×
×
  • Create New...