Jump to content
SAU Community

Recommended Posts

Hey im starting to looks for rims for my black r33 s2 NA (4stud)

and went into Dande TTF the tyre factory

Found nice set of rims.

they are Lenso RS-5 black in 18's.

does anyone have these rims or have any pictures of these rims fitted on a car prefferably a skyline :thumbsup: so i get a rough idea of what it will look like.

thanks

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/
Share on other sites

If the link posted are the same wheels as you're going for/getting, they're gonna look shit (fitment wise). They're only 7" wide with an offset of +42 (higher than standard).

Fail from me. :D

Edit: Sorry for my comment, you didn't ask for opinions. :D:)

Edited by adam-__-
Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3773880
Share on other sites

Guys, he doesnt say anything about sizes, just what the style he is looking for. I found that photo and put it up there, so they may not be the sizes he is looking for. Look at the wheel style rather than the wheel size and go from there.

From my experience, those brand of wheels won't offer much wider wheels or lower offsets anyway.

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3774135
Share on other sites

Well, I think thats the information he is after. He said he's getting 18's though. Do you know what sizes they do come in? May as well give the guy a hand while we're here!! Btw, dont ask me. I'm shit with the whole offset thing!

They only come in 17 x 7.0 and 18 x 7.5 from what I can see and I highly doubt they come in any other offset.

Edit: They come in 19 x 8.0 as well. No offset was mentioned for any width.

Edited by adam-__-
Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3774166
Share on other sites

  • 3 weeks later...

thanks for all the info guys and yea opinions welcomed good or bad....im looking for this style in four stud ...i dont know anything about offset so i was just hoping these would sit nicely??

i am 100% on getting 18inch just hard to come by in black four stud.

post-38129-1208782347_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3812850
Share on other sites

thanks for all the info guys and yea opinions welcomed good or bad....im looking for this style in four stud ...i dont know anything about offset so i was just hoping these would sit nicely??

i am 100% on getting 18inch just hard to come by in black four stud.

How they'll look when fitted will depend A LOT on what the offsets are.

You're after 18" so they'll be 7.5" wide (not wide at all).

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3813508
Share on other sites

ok my mum rang up few shops to get quotes and she got told that putting the Lenso rs5 on my 33 n/a would be illegal due to the offset????? and if in a collision insurance wouldnt cover me.

its annoying the hell out of me trying to find decent 4four stud black rims...i found some finally and they wont fit properly due to offset :P

anyway we got reccomended to go to Motorsport wheels and tyres or something in dandenong so might have a look there.

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3821035
Share on other sites

ok my mum rang up few shops to get quotes and she got told that putting the Lenso rs5 on my 33 n/a would be illegal due to the offset????? and if in a collision insurance wouldnt cover me.

its annoying the hell out of me trying to find decent 4four stud black rims...i found some finally and they wont fit properly due to offset :D

anyway we got reccomended to go to Motorsport wheels and tyres or something in dandenong so might have a look there.

That offset/track or wheel modification rule is farkin stupid.

Your wheels can't be 25mm wider/thinner than the widest wheel specified by the manufacturer for that vehicle, you can't increase/decrease the car's total track by 25mm, etc.

If you want to keep your car 100% legal, don't modify your car at all. Any modification will be illegal unless you get some engineers certificate.

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3821942
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
    • Yes I as well would like to find out where I could get some of the seat material with the red or blue small squares in it
×
×
  • Create New...