Jump to content
SAU Community

Recommended Posts

The ticking sound can usually be rectified with a higher viscosity (thicker) oil. Many cars of all makes with higher kms usually make a ticking sound. Subaru's are especially renowned for this. How many kms on the car and did the ticking occur once you changed the oil?

I doubt it would be your belts as the sound wouldn't go away once the engine is warmed up.

Link to comment
https://www.sau.com.au/forums/topic/213844-tick-tick-tick/#findComment-3776819
Share on other sites

The ticking sound can usually be rectified with a higher viscosity (thicker) oil. Many cars of all makes with higher kms usually make a ticking sound. Subaru's are especially renowned for this. How many kms on the car and did the ticking occur once you changed the oil?

I doubt it would be your belts as the sound wouldn't go away once the engine is warmed up.

Ah i see, i brought the car at 102,000k and now its done 106,000k. The oil that i used was motul turbo light, is there a way to reduce the noise? I like it when the motor is quiet.. An also i did not hear the tick once the oil was change it was not until weeks after

Edited by gazal
Link to comment
https://www.sau.com.au/forums/topic/213844-tick-tick-tick/#findComment-3777003
Share on other sites

Reduce the noise by changing the oil to what it was before basically. Also now that we are approaching winter your car will get even noisier on start up. This is normal. You learn to live with it, but you can reduce the noise with the right oil imo.

Don't get 0W-xx viscosity. You don't need it. Good for revving out easy but too thin and by rule of thumb will be the noisiest. If you go by the Nissan handbook, they recommend their patented 7.5W (for everything!), but that oil breaks down easy (semi synthetic). I found Motul 4100 degraded quickly too (also semi synthetic). Motul Chrono 300V was much nicer to the ears and engine. Expensive stuff though. It is a case of sticky lifters/tappets and some cars are more prone than others. In my experience it has been an oil thing and has a direct correlation with the outside temperature as you will notice.

This is just from my experience and of various mechanics recommendation.

Edited by HotPlates
Link to comment
https://www.sau.com.au/forums/topic/213844-tick-tick-tick/#findComment-3777100
Share on other sites

Cool, thanks for the feedback guys.. So what is it? the oil or the gasket? i dont know much about cars and if there's something wrong i'll take it to a workshop. I rather find out what could be wrong with it so that if i do take it to a workshop i don't come out with a new car..haha

Link to comment
https://www.sau.com.au/forums/topic/213844-tick-tick-tick/#findComment-3777432
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My crystal ball says that when they replaced the pads, they didn't replace all of the brake hardware (could be a missing shim, pin, spring, etc).  Finding a low dust pad should be very easy. Have a google for things like, low dust / soft pad compound / easy on rotors. Your dust primarily comes from the rotors getting eaten up by the pads. 
    • I think old mate is going to continue to hold out for awhile at that price
    • OBD1 is a catch-all term for pre-OBD2 which could have basically any connector design and protocol. I really don't understand this attitude against using data logging for issues that can be multi-causal and subtle. A no-start situation or something like that sure the scan tool does nothing but if it runs like shit it can often be a sensor issue. When a friend of mine reliably had issues with his N54 not able to stay running eventually I narrowed down the issue to a faulty fuel pressure sensor. Only way I could do that was a scan tool to look at the fuel rail pressure and see shadow codes for fuel pressure. Then check against a pressure gauge. Is reflexively firing up the data logger probably a bad habit? I guess, it can encourage people to not listen/observe but on these old OBD1 cars just taking a log really doesn't do anything by itself. You still have to synthesize everything you know and think about what it all means.
    • https://www.carsales.com.au/cars/details/1999-nissan-skyline-gt-r-v-spec-bnr34-manual-4wd/OAG-AD-24005316   i reckon some former Skyline owners are wishing they held out a little longer before selling up?
    • Yeah saw that video on YouTube. But he got a R grade (repaired) high mileage model and proudly advertised the fact it was super cheap and no doubt with issues. I wouldn't be going the cheap and nasty route.
×
×
  • Create New...