Jump to content
SAU Community

Recommended Posts

The ticking sound can usually be rectified with a higher viscosity (thicker) oil. Many cars of all makes with higher kms usually make a ticking sound. Subaru's are especially renowned for this. How many kms on the car and did the ticking occur once you changed the oil?

I doubt it would be your belts as the sound wouldn't go away once the engine is warmed up.

Link to comment
https://www.sau.com.au/forums/topic/213844-tick-tick-tick/#findComment-3776819
Share on other sites

The ticking sound can usually be rectified with a higher viscosity (thicker) oil. Many cars of all makes with higher kms usually make a ticking sound. Subaru's are especially renowned for this. How many kms on the car and did the ticking occur once you changed the oil?

I doubt it would be your belts as the sound wouldn't go away once the engine is warmed up.

Ah i see, i brought the car at 102,000k and now its done 106,000k. The oil that i used was motul turbo light, is there a way to reduce the noise? I like it when the motor is quiet.. An also i did not hear the tick once the oil was change it was not until weeks after

Edited by gazal
Link to comment
https://www.sau.com.au/forums/topic/213844-tick-tick-tick/#findComment-3777003
Share on other sites

Reduce the noise by changing the oil to what it was before basically. Also now that we are approaching winter your car will get even noisier on start up. This is normal. You learn to live with it, but you can reduce the noise with the right oil imo.

Don't get 0W-xx viscosity. You don't need it. Good for revving out easy but too thin and by rule of thumb will be the noisiest. If you go by the Nissan handbook, they recommend their patented 7.5W (for everything!), but that oil breaks down easy (semi synthetic). I found Motul 4100 degraded quickly too (also semi synthetic). Motul Chrono 300V was much nicer to the ears and engine. Expensive stuff though. It is a case of sticky lifters/tappets and some cars are more prone than others. In my experience it has been an oil thing and has a direct correlation with the outside temperature as you will notice.

This is just from my experience and of various mechanics recommendation.

Edited by HotPlates
Link to comment
https://www.sau.com.au/forums/topic/213844-tick-tick-tick/#findComment-3777100
Share on other sites

Cool, thanks for the feedback guys.. So what is it? the oil or the gasket? i dont know much about cars and if there's something wrong i'll take it to a workshop. I rather find out what could be wrong with it so that if i do take it to a workshop i don't come out with a new car..haha

Link to comment
https://www.sau.com.au/forums/topic/213844-tick-tick-tick/#findComment-3777432
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah saw that video on YouTube. But he got a R grade (repaired) high mileage model and proudly advertised the fact it was super cheap and no doubt with issues. I wouldn't be going the cheap and nasty route.
    • I don't really know general street pads too well, but there is no reason you can't get a low dust, long wearing, no squeal pad that works for those calipers at a reasonable price....they would just be a low end to medium price daily style pad.  If new pads don't have much bite or they loose it over time, it is probably just the pad glazing up which you can fix by giving them a good thrashing every now and then (or get the mechanic to deglaze them at next service) Track or semi track pads are where you have to put up with excessive dust (and potentially squealing as a side effect of that) in return for good bite and performance when very hot. Street pads have nothing like that sort of punishment, even long downhills with the brakes on are easier than a track session
    • lol yeah I'll check that, reminds me of the LDV thread!  I don't think that is the problem here, the starter doesn't even solenoid click. I did do a super quick test by removing the starter motor's power cable from the engine bay fuse box and the battery voltage was still 10v, so something super fishy is going on. BTW here is a R33 fuse box table I threw together from a few sources....use at own risk! R33 Fuse Box and Sources.xlsx
    • Johnny's approach, throw all the Nissan electronics into the trash. Best thing I've done to my shit box, go DBW.
    • Sounds like the JAX guys must have installed some really awful pads, are they BenShit/BenDicks pads by any chance?
×
×
  • Create New...