Jump to content
SAU Community

Recommended Posts

  • Replies 136
  • Created
  • Last Reply

Top Posters In This Topic

technically not auto, but in still pretty auto.

I'll rephrase the question, just in case you had difficulty trying to comprehend what I was asking :D

Is it manual?

of course its manual, its a DSG which means its a manual gearbox, no torque converter present.

clearly you aren't switched on enough to have read through the R35 section already, do you need me to rephrase that for you?

there has been millions of threads on the gearbox already..

of course its manual, its a DSG which means its a manual gearbox, no torque converter present.

clearly you aren't switched on enough to have read through the R35 section already, do you need me to rephrase that for you?

there has been millions of threads on the gearbox already..

Sigh.

I know about the damn gearbox. Get over it.

I read somewhere that Nissan would MAYBE release the V-Spec (or that evo one) with a manual gearbox system, gearstick, clutch and all.

That's what I was getting at, without having to get into technical detail......

Edited by IOWNU
I would rather have the stock GTR Brembos on a road car, as you will never need the PCCB on the street, except for wank value.

This is true. You can't possibly drive a modern supercar hard enough on public roads, without being arrested/shot, to even come close to troubling the standard 380mm+ steel brake rotors (yes, i'm looking at all you people with Ferraris, Lambos and Porsches who tick the carbon/ceramic option for an extra $20~30k, just to trundle around the city at or below the speed limit)

BUT, big-ups to Nissan for making sure there is an R35 model for that addresses the main concerns for track-heads (the kerb weight and the brake fade resistance of the standard car), and allows the V-spec to compete head to head with cars costing over 3 times as much.

I seriously doubt nissan is stupid enough to put a full manual in the new GT-R at any stage. Reckon you can change gears faster than the DSG? I dont...

A big part of the reason why the 'Ring lap time is so good- Imagine how many seconds all the lost tenths of a normal gearchange would add up to over the course of 21 kilometres.

heard that there's another version call v-spec evo or something? :P

Theres been a lot of whispers about this, but who knows.

Until its officially released i guess no one knows for sure.

They havent even released the Vspec yet so itll be a while

A big part of the reason why the 'Ring lap time is so good- Imagine how many seconds all the lost tenths of a normal gearchange would add up to over the course of 21 kilometres.

Not only that but the DSG gearbox in the GTR is rated as the most technologically awesome gearbox in any car - bar the Veyron. The reason is that the torque is maintained while you shift gears and does not drop off like in a conventional gearbox or any of the 'paddle shifting' gearbox's of the F430 or Gallardo.

I read somewhere that Nissan would MAYBE release the V-Spec (or that evo one) with a manual gearbox system, gearstick, clutch and all.

That's what I was getting at, without having to get into technical detail......

It has a "gearstick", two in fact, mounted behind the steering wheel.

It has a "clutch", two in fact.

"And all", do you mean a clutch slave cylinder, thrust race etc? It has them, they are just electronicaly controlled because us humans move our left feet too slowly.

Cheers

Gary

the only reason to prefer a human-controlled manual 'box (and going slower) now, is machismo

like the guys back in the day that probably lamented the advent of synchro rings in gearboxes 'coz it "reduced driver involvement!" :laugh:

spot on shaun. I don't miss crash boxes, and I won't miss a clutch pedal.

Very impressive time they set. I wonder what tyres they are running. It was the quickest car from a volume manufacturer (well I am still arguaing with Neil if Radical produce in volume....)

haha - you mean "numbers we just made up"

The V-Spec is not due for any substantial power increase beyond what you get from tweaks to the intake and exhaust.

Not only that but the DSG gearbox in the GTR is rated as the most technologically awesome gearbox in any car - bar the Veyron. The reason is that the torque is maintained while you shift gears and does not drop off like in a conventional gearbox or any of the 'paddle shifting' gearbox's of the F430 or Gallardo.

lol!

the f430 gearbox is on par with the gtr.

i personally think the F430 Scuderia gearbox is better than the gtr but i havn't driven a f430 or a gtr for that matter...

so your comment is useless unless you are an engineer and have scrutised the plans or the transverse themselves.

"numbers we made up" = true until you have officially timed numbers. It all means horse shit until then.

There are slow dsg's and fast dsg's... I've seen and heard the downshift... sounded quick... looked quick... I havent driven it so be stuffed if i know...

do you guys have a problem with reffering to your wished for GB as an H pattern?

If i come of cranky its my wifes fault.... blame her, I do.

so your comment is useless unless you are an engineer and have scrutised the plans or the transverse themselves.

if your comment is directed to me. then yes my comments are useless but i what i was tring to do is point out that "skyline_man" comments are also useless

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
    • I have a r34 sedan 1999 manual converted need some help with my speedometer it only reads upto 98km and then stops currently still running the auto cluster any easy fixes no speedo drive is connected yet, if someone has a video for wiring up the manual speedo sensor with the auto cluster please send through 
×
×
  • Create New...