Jump to content
SAU Community

Recommended Posts

hi, can anyone tell me the [correct] offsets for 19.8.5 front,and 19.9.5 rear, for a v35 2003 prem coupe, I would like to keep tyres inside guards, any help on this would be great. Thanks G.T.

The most common offsets for those sizes are +22 front and rear. However if you are lowered and how far will also play a part in how agressive you can go with the offset.

I've also seen front offsets go into the high teens, but by far +22 is the most common.

I'm currently running +24 F and +28 rear on the sizes you mentioned and to they look fine, and i have no rubbing issues at all. The car i slightly lowered with Nismo springs and shocks.

Good time for a pic :D

v35ixgg5.th.jpg

Link to comment
https://www.sau.com.au/forums/topic/213938-19-inch-wheels/#findComment-3777800
Share on other sites

With the right tyre profile you can go lower.

People run 9.5 / 10.5 with +22 offsets for the wheels in the stock guards. If you're running an inch narrower wheels, you can afford to drop 5mm off those offsets and still be safe.

Link to comment
https://www.sau.com.au/forums/topic/213938-19-inch-wheels/#findComment-3778686
Share on other sites

With the right tyre profile you can go lower.

People run 9.5 / 10.5 with +22 offsets for the wheels in the stock guards. If you're running an inch narrower wheels, you can afford to drop 5mm off those offsets and still be safe.

Thanks, the wheels Im getting are 19.8.5 F. and 19.9.5 R. offsets for front are 22,30,38,45. The rear offsets are 30,38,45, only. Do you know what the best combo would be. Thanks very much for help. G.T.
Link to comment
https://www.sau.com.au/forums/topic/213938-19-inch-wheels/#findComment-3778813
Share on other sites

The most common offsets for those sizes are +22 front and rear. However if you are lowered and how far will also play a part in how agressive you can go with the offset.

I've also seen front offsets go into the high teens, but by far +22 is the most common.

I'm currently running +24 F and +28 rear on the sizes you mentioned and to they look fine, and i have no rubbing issues at all. The car i slightly lowered with Nismo springs and shocks.

Good time for a pic :Dv35ixgg5.th.jpg

Thanks nismo, what size tyres are you running, and what is now the ride height from standed now. as per pics thanks G.T. p.s. going to use standed 350z springs for drop,would any year model be OK, Looking for small drop, is it about 15mm not shaw.
Link to comment
https://www.sau.com.au/forums/topic/213938-19-inch-wheels/#findComment-3780495
Share on other sites

Thanks nismo, what size tyres are you running, and what is now the ride height from standed now. as per pics thanks G.T. p.s. going to use standed 350z springs for drop,would any year model be OK, Looking for small drop, is it about 15mm not shaw.

Hey mate,

Tyres are

F 245/40/19

R 275/35/19

The drop I have is very subtle, probably about the same as what you would get from 350z springs. I lowered my last one on 350z tein H-techs and was very happy with the drop, a bit more than the pic I have but it did scrape on the odd driveway.

However the NISMO package is a massive step forward compared to stock. I've driven a stock coupe around a track, and my current one which as NISMO springs/shocks and sways and it's like night and day.

Link to comment
https://www.sau.com.au/forums/topic/213938-19-inch-wheels/#findComment-3780754
Share on other sites

Hey mate,

Tyres are

F 245/40/19

R 275/35/19

The drop I have is very subtle, probably about the same as what you would get from 350z springs. I lowered my last one on 350z tein H-techs and was very happy with the drop, a bit more than the pic I have but it did scrape on the odd driveway.

However the NISMO package is a massive step forward compared to stock. I've driven a stock coupe around a track, and my current one which as NISMO springs/shocks and sways and it's like night and day.

Hey nismo, you say you are running 245/40/19 F, is the rolling Dia larger than STD, I thought 245/35/19 would have been the correct size for the front, was there a reason for the larger Dia Tyre, just curious, Thanks mate G.T.
Link to comment
https://www.sau.com.au/forums/topic/213938-19-inch-wheels/#findComment-3783803
Share on other sites

Hey nismo, you say you are running 245/40/19 F, is the rolling Dia larger than STD, I thought 245/35/19 would have been the correct size for the front, was there a reason for the larger Dia Tyre, just curious, Thanks mate G.T.

Hey mate,

Yep it is slightly larger than standard, but I did a bit of reasearch and the sizes I have (front and rear) work fine together and don't effect teh VCD in any way.

I didn't specifically look for these but when my rims came in from Japan, the tyres were removed. And the guy who brought them in only had these in his workshop and offered them to me at no extra cost. The tyre's are Michelin Pilot Sport PS2 which are around $900 each so i would have been crazy to not take them. :-)

Link to comment
https://www.sau.com.au/forums/topic/213938-19-inch-wheels/#findComment-3787087
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It still combines inches with mm, especially when you have .5 inches involved, and mm and inches that can go in either direction. This would give a clear idea on both sides of the rim, right away, with no arithmetic. Even better if somebody gives you the dimensions of the arch of multiple cars. i.e GTR may be 125mm, a A80 Supra may be 117mm, or something along those lines. Yes, you can 'know' that going from a 10in rim to a 10.5in rim with the same offset moves both sides about 6mm, but you still have to 'know' that and do the math. Often it's combined. People are going from 9.5 +27 to 10.5 +15. You may do the math to know it, but if it was going from (I had to go look it up to be sure) 241mm/2 - 27 - 93.5mm from the center line to (more math) 266/2 - 15 (118mm) from the center line. Versus 93mm vs 118mm. It's right there. If you know you have a GTT with 100mm guards you can see right away that one is close to flush and the other absolutely won't work. And when someone says "Oh the GTR is 120mm" suddenly you see that the 10.5 +15 is about perfect. (or you go and buy rims with approximately 118mm outward guard space) I think it's safe to say that given one of the most common questions in all modified cars is "How do offsets work" and "How do I know if wheels will fit on my car" that this would be much simpler... Of course, nothing will really change and nobody is going to remanufacture wheels and ditch inches and offset based on this conversation :p We'll all go "18x9+30 will line up pretty close to the guards for a R34 GTT (84mm)" but 'pretty close' is still not really defined (it is now!) and if you really care you still have go measure. Yes it depends on camber and height and dynamic movement, but so do all wheels no matter what you measure it for.
    • But offsets are simple numbers. 8" wheel? Call it 200mm, near enough. +35 offset? OK, so that means the hub face is that far out from the wheel centreline. Which is 2s of mental arithmetic to get to 65mm to outer edge and 135mm to inner. It's hardly any more effort for any other wheel width or offset. As I said, I just close my eyes and can see a picture of the wheel when given the width and offset. That wouldn't help me trust that a marginal fitment would actually go in and clear everything, any more than the supposedly simple numbers you're talking about. I dunno. Maybe I just automatically do numbers.
    • Sure! But you at least have simple numbers instead of 8.5 inches +/mm, relative to your current rims you do maths with as well, and/or compare with OEM diameter, which you also need to know/research/confirm..
    • Uniclutch install vid, RB Track edition.   Highlight reel is very drive able, not noisy but still heavy with the clutch master he has.      
×
×
  • Create New...